AOLIKES 18650 2s1p Batterie

AOLIKES 18650 2s1p 2600mAh 7.4V Rechargeable Lithium-ion Battery User Manual

Model: 18650 2s1p Batterie | Brand: AOLIKES

1. Ifihan

Welcome to the user manual for your AOLIKES 18650 2s1p 2600mAh 7.4V Rechargeable Lithium-ion Battery. This manual provides essential information for safe and effective use of your battery pack. Please read it thoroughly before initial use.

Package Awọn akoonu

  • 1 x 7.4V 2600mAh Li-ion Battery Pack with XH2.54/3p Plug Connector

2. Alaye Aabo pataki

Read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

  • Ṣayẹwo polarity: Always verify the polarity of the battery pack with your device's requirements before connection. The red wire typically connects to the positive terminal (+), the black wire to the negative terminal (-), and the yellow (or white) wire to the NTC (Negative Temperature Coefficient thermistor). Incorrect connection can damage your device and the battery.
  • Awọn ẹya Idaabobo: This battery includes built-in protection against over-voltage, labẹ-voltage, over-current, overcharging, overheating, and short circuits. Do not attempt to bypass or modify these safety features.
  • Gbigba agbara: Use only chargers specifically designed for 7.4V lithium-ion battery packs with a limited charge voltage ti 8.4V.
  • Ibi ipamọ: Store the battery in a cool, dry place away from direct sunlight, heat sources, and flammable materials.
  • Idasonu: Dispose of batteries according to local regulations. Do not dispose of in household waste or fire.
  • Bibajẹ: Do not use the battery if it shows any signs of damage, swelling, leakage, or unusual odor.
  • Awọn ọmọde: Jeki kuro ni arọwọto awọn ọmọde.
Safety Warning and Wire Swap Guidelines

Image showing a safety warning icon and text emphasizing checking battery voltage and polarity before use, and guidelines for swapping connector wires.

3. Eto ati fifi sori

Nsopọ Batiri naa

Before connecting the battery pack to your device, ensure the device is powered off.

  1. Carefully align the XH2.54/3p connector of the battery pack with the corresponding port on your device.
  2. Gently push the connector into place until it is secure.
  3. Crucial Safety Tip: Compare the polarity of this new battery pack with your device's original battery or wiring diagram. The standard configuration is Red for Positive (+), Black for Negative (-), and Yellow (or White) for NTC.

Adjusting Connector Wiring (If Necessary)

If the polarity of the new battery's connector does not match your device's requirements, you may need to swap the wire positions within the connector. Proceed with caution and refer to the image below.

  1. Identify the wire(s) that need to be repositioned.
  2. Using a small, sharp object (like a jeweler's screwdriver or a pin), gently press down on the metal barb inside the connector housing, adjacent to the wire you wish to remove.
  3. While holding the barb down, carefully pull the wire out of the connector.
  4. Once removed, gently repair or lift the metal barb slightly if it was flattened too much, to ensure it will lock into place when reinserted.
  5. Reinsert the wire into the correct position in the connector until you hear or feel a click, indicating the barb has engaged.
  6. Repeat for any other wires that need repositioning.
  7. After re-wiring, double-check the polarity before connecting to your device.
Wire Swap Guidelines

Detailed visual guide showing steps to safely swap wires within the XH2.54/3p connector, including pressing down the metal barb, pulling the wire out, repairing the barb, and reinserting.

Battery with XH2.54/3p ConnectorXH2.54/3p Connector Close-up

Osi: Apa view of the AOLIKES 7.4V 2600mAh lithium-ion battery pack, highlighting the XH2.54/3p connector with red, black, and yellow wires. Right: Close-up view of the XH2.54/3p connector, showing its three pins and the standard wire colors.

4. Isẹ

Ngba agbara si Batiri naa

This 7.4V lithium-ion battery pack supports fast charging.

  1. Connect the battery pack to a compatible 7.4V lithium-ion battery charger.
  2. Ensure the charger's output voltage is 8.4V (limited charge voltagati).
  3. Follow the instructions provided with your charger for proper charging procedures.
  4. Do not overcharge the battery. The built-in protection circuit will help prevent this, but it is good practice to monitor charging.

Lilo Batiri naa

The battery pack provides a nominal voltage of 7.4V and can deliver a maximum 5C output current, suitable for 8.4V power tools, mobile speakers, and other mobile devices.

  1. Once connected to your device, power on the device as per its own instructions.
  2. Monitor the device's performance. If you notice any unusual behavior (e.g., overheating, reduced power), disconnect the battery immediately.

5. Itọju

  • Ninu: Keep the battery and its connectors clean and dry. Use a soft, dry cloth to wipe away any dust or debris.
  • Ayewo: Periodically inspect the battery pack for any signs of physical damage, swelling, or corrosion on the terminals.
  • Ibi ipamọ: For long-term storage, charge the battery to approximately 50-60% of its capacity. Store it in a cool, dry environment between 0°C and 25°C (32°F and 77°F). Avoid extreme temperatures.
  • Yago fun Sisọ Jijinlẹ: While the battery has under-voltage protection, avoiding frequent deep discharges can prolong its lifespan.

6. Laasigbotitusita

If you encounter issues with your battery pack, refer to the following common problems and solutions.

IsoroOwun to le FaOjutu
Batiri ko ngba agbaraIncorrect charger, faulty charger, deeply discharged battery, poor connection.Ensure you are using a compatible 7.4V Li-ion charger. Check charger functionality. For deeply discharged batteries, some chargers may not initiate charging; try a specialized Li-ion recovery charger if available, or consult support. Verify secure connection.
Ẹrọ batiri ko ni agbaraIncorrect polarity, loose connection, device fault, battery fault.Double-check connector polarity against device requirements. Ensure the connector is fully seated. Test the device with a known working power source. If the battery is suspected faulty, discontinue use.
Akoko iṣẹ kukuruBattery capacity degradation, high power draw from device, incomplete charging.Ensure the battery is fully charged. Reduce device power consumption if possible. If the battery is old, its capacity may have naturally degraded.
Batiri gbigbonaOvercharging, short circuit, excessive load, internal fault.Disconnect immediately. Ensure proper charging. Check for short circuits in the device or battery. Reduce load. Discontinue use if overheating persists.

Ti awọn iṣoro ba tẹsiwaju lẹhin igbiyanju awọn ojutu wọnyi, jọwọ kan si atilẹyin alabara.

7. Imọ ni pato

Ẹya ara ẹrọẸ̀kúnrẹ́rẹ́
Batiri IruLitiumu Ion Batiri gbigba agbara
Batiri Cell TiwqnLitiumu Iwon
Iṣeto ni2S1P (2 cells in series, 1 parallel)
Oruko Voltage7.4V
Lopin idiyele Voltage8.4V
Agbara Batiri2600mAh
Agbara19.24Wh
Max o wu Lọwọlọwọ5C
Asopọmọra IruXH2.54/3p
Iwọn99 giramu
Nọmba awoṣe18650 2s1p Batterie
OlupeseAOLIKES
AOLIKES 7.4V 2600mAh Lithium-ion Battery

Iwaju view of the AOLIKES 7.4V 2600mAh lithium-ion battery pack, showing its blue casing and label with model, capacity, and nominal voltage alaye.

8. Atilẹyin ọja ati Support

Alaye atilẹyin ọja

This AOLIKES battery pack comes with a 30-day money-back guarantee. Please retain your proof of purchase for warranty claims.

Onibara Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact AOLIKES customer support through the retailer where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.