Antec AX65 ARGB PC Case Instruction Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec AX65 ARGB PC Case. Please read this manual thoroughly before beginning the assembly process to ensure proper installation and safe usage. Keep this manual for future reference.

Alaye Aabo

• Nigbagbogbo ge asopọ ipese agbara lati inu iṣan ogiri ṣaaju fifi sori ẹrọ tabi yiyọ awọn paati eyikeyi kuro.
• Wọ okun ọwọ-atako-aimi lati ṣe idiwọ itujade elekitirotatiki (ESD) ibajẹ si awọn paati.
• Handle all components with care.
• Pa awọn ẹya kekere kuro lati ọdọ awọn ọmọde.
• Rii daju pe fentilesonu to dara lakoko iṣẹ lati ṣe idiwọ igbona.

2. Package Awọn akoonu

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or Antec support.

• Antec AX65 ARGB PC Case
• Àpótí Ẹ̀rọ (àwọn skru, àwọn okùn okùn, àwọn ìdádúró, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ)
• Afowoyi Olumulo (iwe-ipamọ yii)

3. Eto ati Fi sori ẹrọ paati

3.1 Igbaradi

1. Unpack the PC case from its packaging.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off. Place it on a soft, flat surface to prevent scratches.
3. Remove the solid steel side panel by unscrewing the thumb screws at the rear and sliding it backward.
4. Gather necessary tools: Phillips head screwdriver, cable ties (some included in accessory box).

3.2 Fifi sori modaboudu

1. Identify the correct standoff locations for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). Install any necessary additional standoffs from the accessory box.
2. Fi I/O shield sinu ẹhin šiši ọran naa.
3. Fi pẹ̀lẹ́pẹ̀lẹ́ gbé mótábódì rẹ sí orí àwọn ibi tí wọ́n ti ń dì í, kí o sì ṣe àtúnṣe àwọn ihò skru náà.
4. Fi àwọn skru tí a pèsè so mọ́ motherboard náà. Má ṣe fún un ní okun jù.

3.3 Power Ipese Unit (PSU) fifi sori

1. Position the PSU into the dedicated compartment at the bottom rear of the case.
2. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards (if no bottom vent).
3. Secure the PSU to the rear of the case with the provided screws.

3.4 Ibi ipamọ wakọ sori

The AX65 supports both 2.5" SSDs and 3.5" HDDs.

• 2.5" SSDs: Mount SSDs to the dedicated brackets behind the motherboard tray or on the PSU shroud. Secure with screws.
• Awọn HDD 3.5": Install HDDs into the drive cage located under the PSU shroud. Slide the drive into the tray and secure it.

3.5 Expansion Card Installation (e.g., GPU)

1. Yọ awọn ideri iho PCI-E pataki kuro ni ẹhin apoti naa.
2. Align your expansion card with the PCI-E slot on the motherboard.
3. Press firmly until the card is seated correctly.
4. Fi skru ti a pese so kaadi naa mọ.

3.6 USB Management

Lo àwọn ohun tí a gé síta àti àwọn ibi tí a ti so mọ́ ara wọn lẹ́yìn àwo módàbù láti ṣètò àwọn wáyà. Èyí mú kí afẹ́fẹ́ àti ẹwà wọn sunwọ̀n síi.

3.7 Fan and Cooling Setup

The AX65 comes with three 120mm ARGB fans pre-installed at the front and one 120mm ARGB fan at the rear.

• Awọn isopọ Olufẹ: Connect the 3-pin ARGB fan cables to your motherboard's ARGB headers or a compatible ARGB controller. Connect the fan power cables to available fan headers on your motherboard or a fan hub.
• Atilẹyin Itutu Liquid: The front panel supports radiators up to 360mm. The top panel supports up to two 120mm or 140mm fans, or a 240mm radiator.

4. Awọn ilana Iṣiṣẹ

4.1 Agbara Lori

After all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Flip the switch on your PSU to the 'ON' position, then press the power button on the case's top I/O panel.

4.2 ARGB ina Iṣakoso

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) if connected to a compatible 3-pin 5V ARGB header. Refer to your motherboard manual for specific software instructions.

4.3 Iwaju Mo / O Panel

The convenient top I/O panel provides easy access to essential ports and controls:

• Bọtini agbara
• Bọtini atunto
• USB 3.0 Port
• Awọn ibudo USB 2.0 (x2)
• Jack agbekọri
• Gbohungbohun Jack

5. Itọju

5.1 eruku Filter Cleaning

Regular cleaning of dust filters is crucial for maintaining optimal airflow and cooling performance.

• Top Magnetic Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with a soft brush or rinse with water (ensure it is completely dry before reattaching).
• Bottom Pull-out Filter: Slide out the dust filter located at the bottom of the case (under the PSU). Clean it similarly to the top filter.

5.2 Gbogbogbo Cleaning

Lo asọ, damp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components and fan blades.

6. Laasigbotitusita

Ti o ba pade awọn ọran, tọka si awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:

• Ko si Agbara: Ensure the PSU is switched on, the power cable is securely connected, and all internal power cables (24-pin, CPU, GPU) are properly seated. Check front panel power button connections to the motherboard.
• Fans Not Spinning/ARGB Not Lighting: Verify fan power cables are connected to motherboard headers or a fan hub. Ensure ARGB cables are connected to a 3-pin 5V ARGB header and controlled via software. Check for loose connections.
• Igbóná púpọ̀: Ensure all fans are spinning correctly and oriented for proper airflow. Clean dust filters. Verify CPU cooler and GPU cooler are properly installed.
• Awọn ohun elo alaimuṣinṣin: If experiencing intermittent issues, re-seat RAM, GPU, and other expansion cards. Check all cable connections.

For persistent issues, consult your component manuals or contact Antec customer support.

7. Awọn pato

8. Atilẹyin ọja ati Support

Antec products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and technical support, please refer to the official Antec webaaye tabi kan si alagbata agbegbe rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

For further assistance, visit the Antec support page: www.antec.com/support