Reloop RP-7 Professional 7-inch Turntable System User Manual

Ọrọ Iṣaaju

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Awọn Itọsọna Aabo

• Ibi ti ina elekitiriki ti nwa: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Omi ati Ọrinrin: Ma ṣe fi ẹrọ naa han si ojo, ọrinrin, tabi ọriniinitutu ti o pọ ju. Ma ṣe gbe awọn nkan ti o kun fun awọn olomi, gẹgẹbi awọn vases, sori ẹyọ.
• Afẹfẹ: Rii daju pe fentilesonu to peye ni ayika ẹyọ naa. Ma ṣe dina awọn ṣiṣi atẹgun.
• Awọn orisun Ooru: Jeki ẹyọ kuro lati awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran (pẹlu ampliifiers) ti o gbe ooru jade.
• Ninu: Disconnect the power cord before cleaning. Use a dry cloth only.
• Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
• Ibi: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

Package Awọn akoonu

Jẹrisi pe gbogbo awọn ohun kan wa ninu package:

• Reloop RP-7 Professional 7-inch Turntable System
• Okun RCA
• Okun agbara
• Slipmat
• Àdánù ìwọ̀n
• Headshell with cartridge (may vary by region/package)
• Afowoyi Olumulo (iwe-ipamọ yii)

Ọja Pariview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Iwaju view of the Reloop RP-7 Professional 7-inch Turntable System, showcasing the platter, tonearm, and controls.

Awọn ẹya pataki:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Multiple Playback Speeds: Supports 33 1/3, 45, and 78 RPM.
• Ina LED ti a le yọ kuro: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Ṣeto

1. Ṣiṣii ati Gbigbe:

• Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Gently place the aluminum platter onto the spindle.
• Place the slipmat on top of the platter.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or amplifier.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to minimize hum.

Ẹyìn view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Asopọ agbara:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Awọn ilana Iṣiṣẹ

1. Titan tabi Pipa:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Tẹ awọn 33, 45, tabi 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Gbe igbasilẹ kan sori apẹrẹ.
• Tẹ awọn Bẹrẹ/Duro bọtini lati bẹrẹ platter yiyi.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the Bẹrẹ/Duro bọtini.

4. Pitch Adjustment:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Tẹ awọn Tunto button to instantly return the platter speed to 0% pitch adjustment.

5. Lilo ina LED:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Itoju

1. Cleaning the Unit:

• Nigbagbogbo ge asopọ agbara ṣaaju ṣiṣe mimọ.
• Use a soft, dry cloth to wipe the surface of the turntable. Do not use abrasive cleaners, waxes, or solvents.
• For the platter, use a slightly damp asọ ti o ba jẹ dandan, lẹhinna gbẹ daradara.

2. Stylus Care:

• Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Store records vertically in their sleeves to prevent warping.

Laasigbotitusita

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Awọn pato

Atilẹyin ọja ati Support

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

O le wa alaye diẹ sii ati awọn orisun atilẹyin lori awọn Reloop Store on Amazon or the official Reloop webojula.