1. Ifihan
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Redodo 12V 100Ah LiFePO4 Battery and its accompanying 12V/16V 10A Charger. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Ọja Ipariview
The Redodo 12V 100Ah LiFePO4 Battery is designed for deep cycle applications, featuring Bluetooth monitoring and low-temperature protection. It is paired with a versatile 12V/16V 10A charger.
Awọn ẹya pataki:
- Bluetooth Monitoring: Integrated Bluetooth 5.0 BMS allows real-time monitoring of voltage, current, power, and capacity via a smartphone app. Remote discharge/cutoff control is available within a 10-meter range.
- Iwọn Iwapọ: Group 24 dimensions (6.61 x 10.24 x 8.27 inches) offer a space-saving solution, fitting where larger Group 31/27 batteries might not.
- Adjustable Charger Voltage: The included charger supports both 12V and 16V lithium batteries, with an easy-to-use button for voltage yiyan.
- Gbigba agbara yiyara: The 10A charger provides up to 18.25V, capable of charging a 16V 50Ah LiFePO4 battery to 50% in 2.5 hours.
- Apẹrẹ iwuwo fẹẹrẹ: Weighing only 21.8 lbs, it is approximately 65% lighter than comparable AGM batteries.
- Ilọsiwaju Idaabobo: Equipped with a Bluetooth-monitored BMS offering over 20 protections, including overcharge, over-discharge, short-circuit, and low-temperature cut-off.
- Igbesi aye gigun: Utilizes EV-grade LFP cells, providing 4,000-15,000 cycles and an expected lifespan of over 10 years.
- Agbara ti o le gbooro: Supports up to 4P4S configurations for a maximum energy of 20.48 kWh, suitable for solar systems.
Kini o wa ninu apoti:
- Batiri Bluetooth 12.8V 100Ah LiFePO4 pẹlu gige otutu kekere
- Insulating fila fun boluti
- Àwọn Bọ́lọ́ọ̀tì Ibùdó M8- 5/8"
Figure 1: Redodo 12V 100Ah LiFePO4 Battery, 12V/16V 10A Charger, and Bluetooth App Interface.
3. Alaye Aabo
IKILO:
- Do not use this battery as a car battery, starter battery, or golf cart battery. This battery is designed for deep cycle applications only.
- Upon arrival, it is essential to charge the battery with a dedicated lithium iron phosphate charger with 0V capability in order for it to function properly.
- Always ensure correct polarity when connecting the battery to avoid damage to the battery or connected devices.
- Ma ṣe kukuru-yika awọn ebute batiri.
- Má ṣe tú batiri náà ká, má ṣe gún un, tàbí kí o yí i padà.
- Pa batiri naa mọ kuro ninu ina, awọn orisun ooru, ati oorun taara.
- Tọju batiri naa ni itura, gbẹ, ati agbegbe ti o ni afẹfẹ daradara.
- Wọ àwọn ohun èlò ààbò ara ẹni tó yẹ (PPE) bíi ibọ̀wọ́ àti ààbò ojú nígbà tí o bá ń lo bátìrì.
4. Eto
Gbigba agbara akọkọ:
Before first use, the battery must be fully charged with a dedicated LiFePO4 charger that has 0V activation capability. Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative), then plug the charger into an AC power source.
Fifi sori batiri:
The Redodo 12V 100Ah LiFePO4 battery is a Group 24 size, designed for easy drop-in replacement in various applications. Ensure the installation location is secure, well-ventilated, and protected from extreme temperatures and moisture.
Figure 2: Size comparison of Redodo Group 24 battery with Group 27 and Group 31 batteries.
Figure 3: The lightweight design (21.8 lbs) allows for easy handling and installation.
Connecting Multiple Batteries (Optional):
The battery supports up to 4P4S configurations for increased capacity and voltage. When connecting multiple batteries, ensure all batteries are of the same type, capacity, and State of Charge (SOC) before connecting them in series or parallel. Use appropriate cabling and fusing for your system design.
Olusin 4: Example of Redodo battery integration in an RV solar system.
5. Awọn ilana Iṣiṣẹ
5.1 Battery Operation:
Once installed and charged, the battery is ready for use. It is suitable for various deep cycle applications such as RVs, marine vessels, solar energy storage, and off-grid systems. The integrated BMS protects the battery from common issues like overcharge, over-discharge, and short circuits.
5.2 Charger Operation:
The Redodo 12V/16V 10A charger is designed for optimal charging of your LiFePO4 battery.
- Voltage Aṣayan: Use the button on the charger to switch between 12V and 16V charging modes, depending on your battery's requirements.
- Awọn itọkasi LED: The charger features LED indicators to display its status:
- Gbigba agbara: Nigbagbogbo lori Pupa
- Ti gba agbara ni kikun: Nigbagbogbo lori Green
- Duro die: Green Slow Flash
- Stopped Manually: Red-green Slow Flash
- In Set or Protection Mode: Pupa-alawọ ewe Dekun Flash
Figure 5: Redodo 12V/16V 10A Charger with LED Status Indicators.
5.3 Bluetooth App Monitoring:
Download the Redodo Bluetooth app on your smartphone (available on Google Play and Apple App Store) to monitor your battery's status in real-time.
- Data-akoko gidi: View remaining usage time, State of Charge (SOC), voltage, lọwọlọwọ, ati agbara.
- Isakoṣo latọna jijin: The app allows remote control of discharge/cutoff functions within a 10-meter range.
Figure 6: Redodo Bluetooth App Interface for Real-Time Monitoring.
Figure 7: Monitoring battery status with the Redodo app for peace of mind.
6. Itọju
- Ayẹwo igbagbogbo: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary.
- Gbigba agbara: Always use a compatible LiFePO4 charger. Avoid overcharging or undercharging the battery.
- Ibi ipamọ: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.
- Iwọn otutu: The battery features low-temperature cut-off protection, but for optimal performance and lifespan, avoid operating or charging in extreme temperatures.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Batiri ko ngba agbara | Charger not connected, charger fault, battery in protection mode, 0V battery requiring activation. | Check charger connections and power. Ensure charger is compatible with LiFePO4. If battery is at 0V, use a LiFePO4 charger with 0V activation. |
| Ko si agbara agbara lati batiri | Battery in protection mode (e.g., over-discharge, low-temp), loose connections. | Check connections. If in protection mode, charge the battery to reset. Ensure operating temperature is within range. |
| Ohun elo Bluetooth ko sopọ | Bluetooth disabled on phone, battery too far, app issue. | Ensure Bluetooth is enabled on your device. Move closer to the battery (within 10 meters). Restart the app or your phone. |
| Charger LED shows error (Red-green Rapid Flash) | Charger in protection mode or fault detected. | Disconnect charger from battery and AC. Reconnect after a few minutes. If error persists, contact support. |
8. Awọn pato
| Sipesifikesonu | Iye |
|---|---|
| Batiri Iru | LiFePO4 (Lithium Iron Phosphate) |
| Oruko Voltage | 12.8V |
| Agbara ipin | 100 Ah |
| Agbara | 1280Wh |
| Max Ilọsiwaju Ilọsiwaju Lọwọlọwọ | 100A |
| Peak Discharge Current (1S) | 500A |
| Igbesi aye iyipo | 4,000-15,000 cycles (@100% DOD) |
| Awọn iwọn (L x W x H) | 10.24 x 6.61 x 8.27 inches (26 x 16.8 x 21 cm) |
| Iwọn Nkan | 21.8 - 22.2 pounds (9.9 - 10.1 kg) |
| BMS Idaabobo | Overcharge, Over-discharge, Over-current, Short-circuit, Low-temperature Cut-off |
| Ẹya Bluetooth | 5.0 |
| Ṣaja Input Voltage | 100-240V AC |
| Ṣaja o wu Voltage | 14.6V (for 12V battery) / 18.25V (for 16V battery) |
| Ṣaja Jade Lọwọlọwọ | 10A |
9. Atilẹyin ọja ati Support
Redodo stands behind the quality of its products.
- Atilẹyin ọja: Ọja yii wa pẹlu iṣeduro ọdun 5.
- Igbesi aye: The battery is designed for a 10+ year lifespan under normal operating conditions.
- Atilẹyin Onibara: For any questions, technical assistance, or warranty claims, please contact Redodo customer support. We aim to provide a 24-hour response to inquiries.
Figure 8: Redodo Warranty and Support Overview.