darkFlash TH285 ATX Mid-Tower PC Gaming Case Instruction Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash TH285 ATX Mid-Tower PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Aworan 1.1: Iwaju view of the darkFlash TH285 ATX Mid-Tower PC Gaming Case.

2. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to tẹsiwaju pẹlu fifi sori ẹrọ:

• darkFlash TH285 ATX Mid-Tower PC Gaming Case
• 4x darkFlash Air12X 120mm ARGB PWM Fans (pre-installed)
• Accessory Box (screws, cable ties, standoffs, user manual)

3. Awọn pato

Image 3.1: Diagram illustrating key dimensions and component clearances for the TH285 case.

4. Awọn ẹya ara ẹrọ Loriview

• High Airflow Performance: Designed with multiple intake and exhaust pathways for optimal cooling efficiency.
• Awọn ololufẹ ARGB PWM ti a ti fi sii tẹlẹ: Includes four darkFlash Air12X 120mm ARGB PWM fans for effective cooling and customizable lighting.
• Ni kikun-View Apẹrẹ Gilasi Ti o ni Igbadun: Front, top, and side panels are constructed from tempered glass to showcase internal components.
• Spacious Compatibility & Dual-Chamber Layout: Supports large GPUs (up to 415mm) and 360mm radiators. The dual-chamber design separates the PSU and cables for improved thermal performance and aesthetics.
• Top I/O for Easy Access: Conveniently located USB ports and audio jacks on the top panel.
• Practical Maintenance: Features removable dust filters and ample cable routing options.

5. Eto ati fifi sori

5.1. Ngbaradi Ọran naa

1. Fi iṣọra yọọ kuro ninu apoti rẹ.
2. Gbe ọran naa sori iduro, dada alapin.
3. Remove the tempered glass side panels by unscrewing the thumb screws at the rear and gently pulling them away from the chassis. Set them aside on a soft, protected surface to prevent scratches.

Image 5.1: Illustration of removing the tempered glass side panel.

5.2. Modaboudu fifi sori

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (ATX, M-ATX, ITX).
2. Fi modaboudu rẹ si ori awọn idadoro, ki o si ṣeto awọn ihò skru naa.
3. Ṣe aabo modaboudu pẹlu awọn skru ti a pese.

5.3. GPU (Graphics Processing Unit) Installation

1. Remove the required number of PCI slot covers from the rear of the case.
2. Insert your GPU into the appropriate PCIe slot on your motherboard.
3. Secure the GPU to the case with screws. The case supports GPUs up to 415mm in length.

Aworan 5.2: Ẹyin view showing the 7 PCI expansion slots for GPU and other expansion cards.

5.4. Fifi sori ẹrọ Awakọ Ibi ipamọ

The TH285 supports 2x 3.5" HDDs and 3x 2.5" SSDs.

1. Locate the drive bays in the dual-chamber area of the case.
2. For 2.5" SSDs: Mount the SSDs to the designated brackets using the provided screws.
3. For 3.5" HDDs: Slide the HDDs into the drive cages and secure them with screws.

Aworan 5.3: Ti abẹnu view highlighting the locations for 2.5" SSDs and 3.5" HDDs.

5.5. Agbara Ipese Unit (PSU) fifi sori

1. Position the PSU in its dedicated compartment at the rear of the case.
2. Secure the PSU with screws from the exterior rear of the case.

5.6. Fifi sori ẹrọ afẹ́fẹ́ ati radiator

The case comes with 4x 120mm ARGB PWM fans pre-installed. Additional fans or radiators can be installed as follows:

• Oke: Supports up to 2x 140mm or 2x 120mm fans, or a 240/280mm radiator.
• Apa: Supports up to 2x 140mm or 3x 120mm fans, or a 280/360mm radiator.
• Isalẹ: Supports up to 3x 120mm fans, or a 360mm radiator.

Image 5.4: Diagram illustrating radiator and fan placement options.

5.7. Iṣakoso USB

Utilize the cable routing cutouts and tie-down points in the dual-chamber area to organize cables. This improves airflow and maintains a clean interior aesthetic.

5.8. Àwọn ìsopọ̀ Pánẹ́lì I/O

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image 5.5: Close-up of the top-mounted I/O panel featuring USB 3.0 and audio ports.

6. Ṣiṣẹ́ Ọkọ̀ náà

6.1. Agbara Lori

Once all components are installed and connected, press the power button on the top I/O panel to start your system.

6.2. ARGB Fan Control

The pre-installed ARGB PWM fans can be controlled via your motherboard's software if it supports Addressable RGB (ARGB) and PWM fan control. Connect the ARGB cables to the appropriate 3-pin 5V ARGB header and the PWM fan cables to 4-pin fan headers on your motherboard.

7. Itọju

7.1. Fífọ Àwọn Àlẹ̀mọ́ Eruku

The TH285 case includes removable dust filters to prevent dust buildup. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before re-installing.

7.2. Gbogbogbo Cleaning

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be applied to the cloth (not directly to the glass) and then wiped clean.

8. Laasigbotitusita

• Ètò náà kò ṣiṣẹ́: Rí i dájú pé gbogbo àwọn okùn agbára (ATX-pin 24, CPU-pin 8, GPU power) so pọ̀ dáadáa. Rí i dájú pé switch PSU wà ní ipò 'ON'. Ṣàyẹ̀wò ìsopọ̀ bọ́tìnì agbára iwájú pánẹ́lì pẹ̀lú motherboard.
• Fans are not spinning or ARGB lighting is not working: Confirm fan PWM and ARGB cables are correctly connected to the motherboard headers. Check motherboard software for fan speed and lighting control settings.
• Ko si ifihan ti o wu jade: Ensure the GPU is properly seated in its PCIe slot and connected to power. Verify the monitor cable is connected to the GPU, not the motherboard integrated graphics (unless using integrated graphics).

9. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the darkFlash official webaaye tabi kan si alagbata agbegbe rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.