Alaye Aabo pataki
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Yi ti ngbona jẹ apẹrẹ fun hardwired installation only. It is not a plug-in unit.
- Eleyi ti ngbona does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Fifi sori ẹrọ gbọdọ jẹ nipasẹ oṣiṣẹ ina mọnamọna ti o pe ni ibamu pẹlu gbogbo awọn koodu itanna ti orilẹ-ede ati agbegbe.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Eto ati fifi sori
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Iṣagbesori
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Asopọ Itanna
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Awọn ilana Iṣiṣẹ
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Agbara Tan: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Ṣètò Thermostat: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Isẹ idakẹjẹ: This convector heater operates silently, providing consistent warmth without fan noise.
- Lilo akọkọ: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Itoju
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Ninu: Lorekore nu ode ti igbona pẹlu asọ, damp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Yiyọ eruku kuro: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Ayewo: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Laasigbotitusita
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Alagbona ko ni tan-an. | Ko si ipese agbara. Thermostat ṣeto ju kekere. Faulty wiring or thermostat. | Ṣayẹwo Circuit fifọ. Ṣe alekun eto iwọn otutu. Kan si alamọdaju mọnamọna ti o peye. |
| Alagbona nmu ooru ti ko to. | Iwọn yara naa ju agbara igbona lọ. Airflow obstructed. Ìṣòro ìṣàtúnṣe Thermostat. | Ensure heater matches room size (up to 150 sq ft). Pa àwọn ìdènà kúrò nínú àwọn grilles. Recalibrate or replace thermostat. |
| Òórùn àìdára nígbà tí a bá ń ṣiṣẹ́. | Initial burn-off of manufacturing residues. Dust accumulation on heating element. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Stelpro |
| Nọmba awoṣe | ASHC1502WCW |
| Wattage | 1500W (at 240V) / 1125W (at 208V) |
| Voltage | 240 Volts |
| Ampigba | 6.25 Amps |
| Awọn iwọn Ọja (D x W x H) | 3.94" x 28.63" x 17.56" (101mm x 727mm x 446mm) |
| Iwọn Nkan | 15.7 iwon |
| Alapapo Ideri | Up to 150 sq feet |
| Pataki Awọn ẹya ara ẹrọ | Energy Efficient, Fast Heating, Noiseless |
| Fọọmù ifosiwewe | Minisita |
| Àwọ̀ | Funfun |
| Iṣagbesori Iru | Ògiri Ògiri |
| Epo Iru | Itanna |
| inu ile / ita gbangba Lilo | Ninu ile |
| UPC | 626296203491 |
Atilẹyin ọja
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5-odun lopin atilẹyin ọja lórí gbogbo ẹ̀rọ náà.
- s'aiye atilẹyin ọja lori alapapo ano.
- 3 years atilẹyin ọja on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro webojula.
Atilẹyin
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webojula: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.