Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash E400 CPU Air Cooler. The E400 features a digital display, ARGB PWM fan, and is designed for efficient cooling of Intel and AMD CPUs in compact builds. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Alaye Aabo
- Ensure your computer system is powered off and unplugged from the wall outlet before beginning installation.
- Handle components with care to avoid damage. Static electricity can harm electronic components; consider using an anti-static wrist strap.
- Pa awọn ẹya kekere ati awọn ohun elo apoti kuro lọdọ awọn ọmọde.
- Do not attempt to modify the cooler or its components. Unauthorized modifications may void your warranty and pose safety risks.
- Refer to your motherboard and CPU manuals for additional compatibility and installation guidelines.
Package Awọn akoonu
Rí i dájú pé gbogbo àwọn èròjà wà nínú àpò náà kí o tó tẹ̀síwájú pẹ̀lú fífi sori ẹrọ:
- darkFlash E400 CPU Air Cooler (Heatsink with pre-attached fan)
- Mounting Brackets for Intel (LGA1851/1700/1200/115X)
- Mounting Brackets for AMD (AM5/AM4)
- Backplate (Universal)
- Àwọn skru àti àwọn àlàfo ìfìsípò
- Gbona Lẹẹ
- Iwe afọwọkọ olumulo (iwe yii)
Eto ati fifi sori
The darkFlash E400 CPU Air Cooler is compatible with Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets. Follow these general steps for installation. For a visual guide, please refer to the installation video below.
Awọn igbesẹ fifi sori ẹrọ gbogbogbo:
- Mura modaboudu: Remove any existing CPU cooler and clean off old thermal paste from the CPU surface.
- Fi Apá Ẹ̀yìn Sílẹ̀: Position the universal backplate on the rear of your motherboard, aligning it with the CPU socket holes.
- So Awọn Biraketi Iṣagbesori: Secure the appropriate Intel or AMD mounting brackets to the front of the motherboard using the provided screws and spacers.
- Waye Lẹẹ Gbona: Waye kekere kan, iye iwọn pea ti lẹẹ igbona si aarin ti Sipiyu rẹ ti ntan kaakiri ooru (IHS).
- Mount Cooler: Carefully place the E400 heatsink onto the CPU, aligning the mounting holes on the cooler with the standoffs on the brackets. Tighten the screws in a diagonal pattern until snug, ensuring even pressure.
- Connect Fan and ARGB Cables: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard.
- Connect USB Cable for Digital Display: Connect the USB 2.0 cable from the cooler to an available USB 2.0 header on your motherboard.
Note: The E400 is designed for compact Micro-ATX gaming layouts. Due to shorter cable lengths in some batches, it is not recommended for full-sized ATX cases.
Itọsọna Fidio fifi sori ẹrọ:
Awọn ilana Iṣiṣẹ
Digital Display Functionality:
The darkFlash E400 features an integrated pixel-style LED digital display on its top cover. This display provides real-time system monitoring information. By default, it may show CPU temperature. The display supports both Celsius and Fahrenheit units.
Intelligent Control Software:
To unlock the full potential of the digital display and customize its output, install the darkFlash control software. This software connects via the USB 2.0 header and allows you to:
- Monitor CPU temperature, load, wattage, frequency, and voltage.
- Monitor GPU status, fan speed, and memory usage.
- Select specific data points to display.
- Enable automatic data rotation on the display.
- Set display themes.
Download the software from the official darkFlash webojula:
https://www.darkflash.com/driver
Iṣakoso Imọlẹ ARGB:
The 120mm PWM fan features 5V 3-pin ARGB lighting. This lighting can be synchronized with compatible motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion 2.0, ASRock Polychrome RGB) to customize colors and effects, enhancing the aesthetic of your PC build.
Itoju
Regular maintenance helps ensure optimal performance and longevity of your darkFlash E400 CPU Air Cooler.
- Yiyọ eruku kuro: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is not spinning during cleaning to prevent damage.
- Ayewo Olufẹ: Check the fan for any obstructions or signs of wear. If the fan becomes excessively noisy or stops spinning, it may need replacement.
- Lẹẹ igbona: Tí o bá yọ itutu kuro fun idi eyikeyi, a gba ọ niyanju lati nu itutu atijọ kuro ninu CPU ati ipilẹ itutu naa ki o si lo itutu tuntun ṣaaju ki o to tun fi sii.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Fan not spinning or making unusual noise. | Loose fan cable connection, fan obstruction, faulty fan. | Check 4-pin PWM fan cable connection to CPU_FAN header. Ensure no cables or debris are blocking the fan blades. If issues persist, contact support. |
| Digital display is blank or not showing correct information. | Loose USB 2.0 cable connection, software not installed or running, incorrect software settings. | Verify USB 2.0 cable is securely connected to both the cooler and motherboard header. Install the darkFlash control software and ensure it is running. Check software settings for display configuration. |
| Ina ARGB ko ṣiṣẹ tabi awọn awọ ti ko tọ. | Loose ARGB cable connection, incompatible motherboard header (e.g., 12V RGB instead of 5V ARGB), motherboard ARGB software not configured. | Ensure 3-pin ARGB cable is connected to a 5V ARGB header. Check motherboard's ARGB software for lighting settings. |
| High CPU temperatures. | Improper thermal paste application, loose cooler mounting, insufficient airflow in case, fan not spinning at optimal speed. | Re-apply thermal paste. Ensure cooler is securely mounted with even pressure. Check case airflow and fan speed settings in BIOS/software. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | E400 |
| Ọja Mefa | 4.8"L x 6.1"W x 3.6"H (122mm x 155mm x 92mm) |
| Ọna Itutu | Itutu afẹfẹ |
| TDP (Agbara Apẹrẹ Igbona) | Titi di 230W |
| Ooru Pipes | 4 x 6mm vacuum-plated copper heat pipes |
| Fan Iru | 120mm PWM ARGB Fan |
| Iyara Fan | 800-2000 RPM (± 10%) |
| Air Sisan Agbara | Titi di 58.13 CFM |
| Aimi Ipa | 2.27 mm H₂O |
| Ariwo Ipele | 33.4 dBA (O pọju) |
| Ti nso Iru | Agbara omi |
| Fan Service Life | wakati meji 40,000 |
| Asopọ agbara | 4-PWM pin |
| Asopọmọra ARGB | 5V 3-Pin ARGB |
| Digital Display Interface | USB 2.0 (internal header) |
| Ibamu Sockets | Intel LGA1851/1700/1200/115X, AMD AM5/AM4 |
| Ohun elo | Irin, Ṣiṣu |
| Iwọn Nkan | 9.6 iwon |
Alaye atilẹyin ọja
The darkFlash E400 CPU Air Cooler comes with a 1-Odun olupese atilẹyin ọja. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official darkFlash webojula tabi kan si atilẹyin alabara.
Onibara Support
If you encounter any issues or have questions regarding your darkFlash E400 CPU Air Cooler that are not addressed in this manual, please contact darkFlash customer support through their official webojula:
When contacting support, please have your product model (E400) and proof of purchase ready.