Shark BU3521INT

Shark Clean & Empty Cordless Stick Vacuum

Model: BU3521INT

Itọsọna olumulo

Ọrọ Iṣaaju

O ṣeun fun riraasing the Shark Clean & Empty Cordless Stick Vacuum. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read these instructions thoroughly before first use and retain for future reference.

Ohun ti o wa ninu Apoti

Your Shark Clean & Empty Cordless Stick Vacuum package includes the following components:

  • Ẹka Igbale akọkọ (Amudani)
  • Wand
  • Motorized Floor Nozzle with Anti-Hair Wrap brush-roll
  • Auto-Empty Charging Dock (1.3L capacity)
  • Ọsin Multi-Ọpa
  • Ọpa Crevice
  • Adapter agbara

Ṣeto

Follow these steps to assemble and prepare your vacuum for first use:

  1. Ṣe apejọ Vacuum naa: Insert the wand into the motorized floor nozzle until it clicks securely into place. Then, insert the main vacuum unit (handheld) onto the top of the wand until it clicks.
  2. Set up the Auto-Empty Dock: Place the Auto-Empty Dock on a flat, stable surface near a power outlet. Connect the power adapter to the dock and plug it into the wall outlet.
  3. Idiyele Ibẹrẹ: Place the assembled vacuum onto the Auto-Empty Dock. Ensure it is properly seated for charging. The LED display on the vacuum will indicate charging status. Allow approximately 5 hours for a full charge before first use.
Shark Clean & Empty Cordless Stick Vacuum on Auto-Empty Dock

Image: The Shark Clean & Empty Cordless Stick Vacuum docked for charging and automatic emptying.

Three steps to auto-empty convenience: Full, Empty, Sealed

Image: Visual representation of the three steps for auto-empty convenience: returning the full vacuum to its base, automatic emptying, and the sealed anti-allergen system.

Awọn ilana Iṣiṣẹ

Your Shark Clean & Empty vacuum offers versatile cleaning modes and features:

Titan / Paa ati Yiyan Ipo

  • Press the power button on the handheld unit to turn the vacuum on or off.
  • Use the mode selection button to cycle through ECO, AUTO, and BOOST cleaning modes. The LED display will show the selected mode and remaining battery life.
LED display showing battery status and cleaning modes

Image: Close-up of the simple LED display indicating battery status and cleaning modes (Eco, Auto, Boost).

Awọn ọna mimọ

  • Ipo ECO: Provides extended runtime for lighter cleaning tasks.
  • Ipo AUTO: Automatically adjusts suction power based on floor type and debris level.
  • Ipo Igbelaruge: Delivers maximum suction for tough messes and deep cleaning.

Olona-dada Cleaning

The motorized floor nozzle features a self-cleaning brush-roll that automatically adjusts its speed and suction for optimal performance on both carpets and hard floors. This ensures effective pickup of dust, debris, and pet hair.

Multi-surface cleaning with PowerFins brush-roll

Image: The vacuum cleaning across different floor types, demonstrating its multi-surface capability.

Lilo bi Igbale Amusowo

Detach the main vacuum unit from the wand to use it as a powerful handheld vacuum for cleaning stairs, upholstery, car interiors, and other tight spaces.

Key features: Lightweight, Handvac, Multi-surface, Long runtime

Aworan: An loriview of the vacuum's key features, including its lightweight design, removable handvac, ability to clean all floor types, and up to 40 minutes of runtime.

Lilo Awọn asomọ

  • Ọsin Olona-Ọpa: Attach to the handheld vacuum or wand for effective removal of pet hair and embedded dirt from various surfaces.
  • Irinṣẹ Crevice: Use with the handheld vacuum or wand to clean narrow gaps, corners, and hard-to-reach areas.
Pet Multi-Tool for removing pet hair and embedded dirt

Image: The Pet Multi-Tool attached to the handheld vacuum, effectively cleaning pet hair from upholstery.

Duster Crevice Tool for cleaning hard-to-reach areas

Image: The Duster Crevice Tool attached to the handheld vacuum, reaching into tight spaces on a shelf.

Itoju

Itọju deede ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati fa igbesi aye igbale rẹ pọ si.

Ipilẹ Ofo Aifọwọyi

  • The Auto-Empty Base automatically empties the vacuum's dustbin after each cleaning session.
  • The base has a 1.3L capacity, allowing for hands-free emptying for up to 30 days, depending on usage.
  • When the Auto-Empty Base is full, dispose of the collected debris responsibly.
Reduced dust exposure during emptying process

Image: Comparison showing reduced dust exposure when using the Auto-Empty System versus manual emptying.

Filter Cleaning

The sealed HEPA system captures 99.9% of dust and allergens. Regularly clean the filters to maintain suction power.

  • Refer to the full instruction manual for detailed steps on accessing and cleaning the pre-motor and post-motor HEPA filters.
  • Wash filters with cold water only. Allow them to air dry completely for at least 24 hours before reinstalling. Do not use a hairdryer or other heating methods.

Anti-Hair Wrap Brush-roll

The self-cleaning brush-roll is designed to prevent hair wrap. If any hair or debris remains wrapped around the brush-roll, carefully remove it using scissors or by hand.

No hair wrap technology on the brush-roll

Image: A comparison showing a traditional brush-roll with hair wrap versus the Shark Anti-Hair Wrap brush-roll.

Laasigbotitusita

Ti o ba pade awọn ọran pẹlu igbale rẹ, tọka si awọn ojutu ti o wọpọ wọnyi:

IsoroOwun to le FaOjutu
Igbale ko ni titanBattery is not charged or improperly inserted.Ensure the battery is fully charged and correctly seated in the handheld unit.
Isonu ti afamoraClogged filter, full dustbin, or obstruction in the nozzle/hose.Clean filters, empty the dustbin, and check for blockages in the floor nozzle, wand, or handheld unit.
Brush-roll not spinningObstruction in the brush-roll or incorrect mode.Clear any debris from the brush-roll. Ensure the vacuum is in a mode suitable for floor cleaning (e.g., AUTO or BOOST).
Auto-Empty Dock not emptyingVacuum not properly seated on the dock, or dock bin is full.Ensure the vacuum is fully seated on the dock. Check and empty the dock's debris bin if full.

Ti awọn iṣoro ba wa, jọwọ kan si atilẹyin alabara.

Awọn pato

  • Awoṣe: BU3521INT
  • Ọkọ ayọkẹlẹ Wattage: 240 Wattis
  • Auto-Empty Base Capacity: 1.3 liters
  • Vacuum Bin Capacity: 0.42 liters
  • Akoko ṣiṣe: Up to 40 minutes (in ECO mode with non-motorized tool)
  • Iru Batiri: Litiumu-Iwọn
  • Akoko Gbigba agbara Batiri: O fẹrẹ to awọn wakati 5
  • Sisẹ: HEPA (captures 99.9% of dust and allergens)
  • Ìwúwo: 2660 giramu
  • Awọn iwọn (L x W x H): 37.3 x 26.5 x 110.5 centimeters
  • Awọn ẹya pataki: Cordless, HEPA, Headlight, High Power, Portable, Anti-Hair Wrap

Atilẹyin ọja & Atilẹyin

Your Shark Clean & Empty Cordless Stick Vacuum comes with a manufacturer's warranty and dedicated customer support.

Alaye atilẹyin ọja

Ọja yi ti wa ni bo nipasẹ a 2-odun olupese ká atilẹyin ọja. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or visit the official Shark webojula.

Iforukọsilẹ ọja

Register your product to receive important updates and to activate your warranty:

Forukọsilẹ lori ayelujara: https://sharkninja.in/pages/register-warranty

Onibara Support

For assistance, technical support, or service inquiries, please contact Shark customer service:

Shark | NINJA Support Contact Information

Image: Shark | NINJA Support information, including contact number, email, operating hours, and a QR code for warranty registration.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.