How do I reset the factory settings on the VARUN X-Plorer electric bike after the display settings were accidentally changed?

The provided manual for the VARUN X-Plorer does not explicitly list a "factory reset" button combination. However, based on the behavior described (holding the Up and Down buttons), you likely entered the P-Settings (Parameter Settings) menu, which controls speed limits, wheel size, and voltage.To attempt to restore or fix the settings, try the following steps:Access the Menu: With the display powered on, press and hold the Up and Down buttons simultaneously for a few seconds to re-enter the settings menu.Check Pedal Assist (PAS) Level: Ensure your bike is not stuck in "Level 0." Use the Up button to increase the assist level; the motor and throttle often will not engage or will have very low power at Level 0 or 1.Check Speed Limit (P-Setting): While in the menu, look for a setting (often P08 on many e-bike displays) that represents the speed limit. If this was accidentally set to a very low number, the throttle will barely move the bike.Standard Reset Attempt: On many similar LCD displays used by VARUN, holding the Power and Down buttons (or sometimes Up and Down) for 10+ seconds while in the settings menu may trigger a reset, though this varies by firmware version.Caution: Because the manual does not provide a specific P-setting map, changing values randomly can cause further issues. If the bike remains unresponsive, it is highly recommended to contact VARUN Customer Support via their official Amazon store or the contact information provided with your purchase to get the specific default values for the X-Plorer model.

VARUN X-Plorer

VARUN Xplorer Electric Bike User Manual

Model: X-Plorer | Brand: VARUN

1. Ifihan

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your VARUN Xplorer Electric Bike. Please read it thoroughly before your first ride and retain it for future reference.

VARUN Xplorer Electric Bike with accessories

Image 1: The VARUN Xplorer Electric Bike, showcasing its design and included accessories.

2. Alaye Aabo

Always prioritize safety when operating your electric bike. Failure to follow safety guidelines can result in serious injury or damage to the bike.

Wọ àṣíborí àti àwọn ohun èlò ààbò tó yẹ nígbà gbogbo.
Mọ ara rẹ pẹlu awọn ofin ati ilana irinna agbegbe fun awọn kẹkẹ ina.
Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all connections.
Maṣe gun labẹ ipa ti ọti-lile tabi oogun.
Yẹra fún gígun kẹ̀kẹ́ ní ipò ojú ọjọ́ tí kò dára tàbí lórí àwọn ibi tí ó máa ń yọ̀.
Rí i dájú pé batiri náà ti wà ní ipò rẹ̀ dáadáa kí o tó lè gùn ún.

3. Package Awọn akoonu

Ni ṣiṣi silẹ, rii daju pe gbogbo awọn nkan wa:

1 x VARUN Xplorer Electric Bike
1 x Itọsọna olumulo (iwe yii)
1 x Ṣaja
1 x Apo Irinṣẹ

4. Eto ati Apejọ

Your VARUN Xplorer Electric Bike arrives approximately 90% pre-assembled. Follow these steps for final assembly:

4.1. Unpacking ati Ibẹrẹ Ayewo

Carefully remove the bike from its packaging. Remove all protective film and packaging materials. Confirm all listed components are present.

Video 1: VARUN S20-1 Installation Video. This video demonstrates the unpacking and initial assembly steps for the VARUN electric bike.

4.2. Handlebar and Seat Installation

Install the handlebar and adjust its height for comfortable riding. Secure the seat post into the frame and adjust the seat height.

4.3. Front Wheel, Mudguards, and Headlight Installation

Attach the front wheel, ensuring the brake rotor is correctly aligned with the caliper. Install the front mudguard and headlight. Secure all fasteners.

VARUN Xplorer Electric Bike front wheel and suspension

Image 2: Close-up of the front wheel, showing the fat tire, disc brake, and front suspension system.

4.4. Fifi sori efatelese

Identify the left (L) and right (R) pedals. Thread them into the crank arms and tighten securely with a wrench to prevent loosening during operation.

4.5. Fifi sori ẹrọ Atunse-ẹhin

Attach the rear reflector to the designated mounting point on the rear rack or fender. Ensure it is visible and securely fastened.

5. Awọn ilana Iṣiṣẹ

5.1. Batiri sori ati yiyọ

To install the battery, align it with the frame compartment and slide it in until it clicks into place. Use the key to lock it. To remove, unlock with the key and slide the battery out. Ensure the key is in the "power-on" state for operation and removed for security when parked.

5.2. Powering On/Off and Display

Press and hold the power button on the LCD display to turn the bike on or off. The display shows speed, battery level, mileage, and pedal-assist level.

VARUN Xplorer Electric Bike LCD display and controls

Image 3: Close-up of the handlebar, showing the SHIMANO gear controller, accelerator, and upgraded LCD display with mileage, speed, battery, and mode indicators.

5.3. Awọn ọna gigun

The VARUN Xplorer offers multiple riding modes:

Ipo Itanna Mimo: Use the throttle for motor-only propulsion.
Ipo Iranlọwọ Efatelese: The motor provides assistance as you pedal. Adjust assist levels via the display.
Ipo afọwọṣe: Gùn kẹ̀kẹ́ gẹ́gẹ́ bí àṣà ìbílẹ̀ láìsí ìrànlọ́wọ́ mọ́tò.
Ipo oko oju omi: Maintain a constant speed without continuous throttle input (refer to display for activation).

Video 2: Demonstration of the electric bike's speed in PAS (Pedal Assist System) mode, reaching up to 36 MPH.

5.4. Gear Shifting

Utilize the 7-speed SHIMANO gear system for optimal pedaling efficiency across various terrains. Shift gears smoothly while pedaling.

VARUN Xplorer Electric Bike 750W motor and fat tires

Image 4: Illustration of the 750W peak brushless motor, highlighting its power and capability for inclines.

5.5. All-Terrain Riding

The 20"x4" puncture-resistant fat tires and dual suspension system provide superior traction and comfort on various surfaces, including sand, gravel, snow, and rugged trails.

Video 3: VARUN S20-1 Riding Show Video. This video demonstrates the bike's performance and stability across different terrains.

6. Itọju

Itọju deedee n rii daju pe kẹkẹ ina rẹ yoo pẹ to ati pe yoo ṣiṣẹ lailewu.

Taya: Check tire pressure regularly. The 20"x4" fat tires are puncture-resistant but should be inspected for wear and damage.
Awọn idaduro: Inspect dual disc brakes for wear on pads and rotors. Ensure brake levers are responsive.
Itọju Batiri: Charge the 48V 13AH battery fully after each ride. Avoid complete discharge. Store in a cool, dry place. The built-in BMS protection system helps extend battery life.
Ẹwọn: Keep the chain clean and lubricated for smooth gear changes and to prevent rust.
Férémù: Fọ́ fírẹ́mù aluminiomu pẹ̀lú ìpolówóamp Aṣọ. Yẹra fún fífọ aṣọ tí ó ní agbára gíga lórí àwọn ohun èlò iná mànàmáná.

VARUN Xplorer Electric Bike with dual suspension and fat tires

Image 5: The VARUN Xplorer Electric Bike demonstrating its full suspension system and fat tires on rough terrain, emphasizing comfort and shock absorption.

Image 6: Close-up of the advanced dual disc braking system, ensuring reliable stopping power.

7. Laasigbotitusita

If you encounter issues, refer to this section before contacting support.

Isoro	Owun to le Fa	Ojutu
Kẹ̀kẹ́ kìí ṣiṣẹ́ mọ́	Batiri ko gba agbara tabi ko fi sori ẹrọ daradara.	Ensure battery is fully charged and securely locked in place. Check connections.
Motor ko ṣe iranlọwọ	Pedal-assist level too low, or throttle not engaged.	Increase pedal-assist level on the display. Ensure throttle is fully engaged if using pure electric mode.
Bireki lero ailera	Worn brake pads or loose brake cables.	Ṣe àyẹ̀wò àwọn pádì ìdábùú fún ìbàjẹ́ kí o sì pààrọ̀ rẹ̀ tí ó bá pọndandan. Ṣe àtúnṣe ìfúnpọ̀ okùn ìdábùú náà.

8. Awọn pato

Iru keke: Electric Bike
Ibiti ọjọ ori: Agbalagba
Brand: VARUN
Nọmba Awọn Iyara: 7
Àwọ̀: Dudu
Iwọn Kẹkẹ: 20 inches
Ohun elo fireemu: Aluminiomu
Irú ìdádúró: Meji
Mọto: 500W (Ti o ga julọ 750W)
Batiri: 48V 13AH (Removable)
Ara Brake: Disiki
Orukọ awoṣe: X-Plorer

9. Atilẹyin ọja ati Support

The VARUN Xplorer Electric Bike comes with a Atilẹyin ọja Ọdun kan. For any questions, technical assistance, or warranty claims, please contact VARUN customer support. Refer to the contact information provided with your purchase or visit the official VARUN webojula.

Official VARUN Store: VARUN Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.