ECOELER YDM003 Single Pole Digital Dimmer Switch User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER YDM003 Single Pole Digital Dimmer Switch. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Alaye Aabo

• IKILO: Láti yẹra fún iná, ìpayà, tàbí ikú, pa agbára ní ibi tí ẹ̀rọ ìfọ́mọ́ tàbí àpótí fiusi wà kí o sì dán an wò pé agbára ti pa kí o tó fi wáyà sí i.
• Installation must be performed by a qualified electrician or in accordance with local electrical codes.
• This dimmer switch is for single-pole applications only. Do not use in 3-way or 4-way circuits.
• A neutral wire is REQUIRED for this device to function. Ensure your electrical box has a neutral wire (usually white) before installation.
• Do not use with smart bulbs.
• Maṣe kọja wat ti o pọjutage ratings: 150W for dimmable LED/CFL bulbs, 300W for incandescent/halogen bulbs.

Ohun ti o wa ninu Apoti

• 1 x ECOELER YDM003 Digital Dimmer Light Switch
• 1 x Odi Awo
• Awọn ilana fifi sori ẹrọ
• Iṣagbesori skru

Eto ati fifi sori

1. Pa Agbara: Kí o tó bẹ̀rẹ̀, rí i dájú pé agbára ti pa ní ibi tí ẹ̀rọ ìdènà tàbí àpótí fiusi bá wà láti dènà ìkọlù iná mànàmáná.
2. Jẹrisi Wiwa:

   Confirm that your electrical box contains a neutral wire (typically white). This dimmer requires a neutral wire for proper operation. Identify the Hot (Line), Load, Ground, and Neutral wires.

   

   Image: Wiring diagram for the ECOELER dimmer switch, illustrating connections for Hot (black), Load (red), Ground (green), and Neutral (white) wires. The diagram emphasizes that a neutral wire is required.

3. Awọn isopọ Waya:
   • Sopọ awọn Hot (Line) wire from the wall box to the dimmer's black wire.
   • Sopọ awọn Fifuye wire (to the light fixture) from the wall box to the dimmer's red wire.
   • Sopọ awọn Ilẹ wire from the wall box to the dimmer's green wire.
   • Sopọ awọn Àdánù wire from the wall box to the dimmer's white wire.
   • Fi gbogbo asopọ mọ pẹlu awọn eso waya.
   

   Image: A detailed diagram showing the ECOELER dimmer switch connected to a single-pole circuit. It clearly labels the Hot (black), Load (red), Ground (green), and Neutral (white) wires, emphasizing the neutral wire requirement.

4. Oke Dimmer: Carefully fold the wires and push the dimmer into the wall box. Secure it with the provided screws.
5. Fi Awo Odi sori ẹrọ: Attach the decorative wall plate over the dimmer switch.
6. Pada Agbara pada: Tan agbara pada si ina ni fifọ iyipo.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso akọkọ

Aworan: Ohun exploded view diagram of the ECOELER dimmer switch, highlighting its main components: the Dim/Brighten buttons, the ON/OFF button, the LED indicators for brightness level, and the hidden trim dial for adjustment.

• Bọtini TAN/PA: Press the large paddle switch to turn lights ON or OFF.
• Dim/Brighten Buttons: Use the small up (▲) and down (▼) buttons to adjust the brightness level. There are 13 dimming levels.
• Awọn itọkasi LED: The 7 LED lights indicate the current brightness level.
• Pare / Pipa: Lights will gradually illuminate or dim to protect your eyes and extend bulb lifespan. The lowest LED indicator remains softly lit for easy location in the dark.

Minimum Brightness Adjustment (Trim Dial)

The trim dial allows you to set the minimum brightness level to prevent flickering or premature turn-off at low settings, especially with certain LED bulbs.

Image: A visual guide demonstrating how to adjust the minimum brightness using the trim dial. It shows removing the rocker cover, locating the dial, and turning it clockwise for brighter minimum or counter-clockwise for less bright minimum.

1. Turn on the dimmer and adjust it to the lowest setting using the down (▼) button.
2. Carefully remove the rocker cover (the large paddle switch) to expose the trim dial.
3. Use a small screwdriver to rotate the "Trim Dial".
   • Turn clockwise (+) to increase the minimum brightness.
   • Turn counter-clockwise (-) to decrease the minimum brightness.
   Adjust until the preferred lowest light level is achieved without flickering.
4. Replace the rocker cover.

Ibamu

The ECOELER YDM003 dimmer switch is designed for wide compatibility with various bulb types:

• Dimmable LED bulbs up to 150W
• Dimmable CFL bulbs up to 150W
• Incandescent or Halogen bulbs up to 300W

Pataki: This dimmer is NOT compatible with smart bulbs. Ensure your bulbs are explicitly labeled as "dimmable" for optimal performance.

Image: The ECOELER dimmer switch displayed next to illustrations of compatible bulb types: 150W/120V Dimmable LED Lamp, 150W/120V CFL Lamp, and 300W/120V Incandescent Lamp.

Itoju

• Láti nu ìyípadà dímmer àti àwo ògiri, fi aṣọ rírọ, d nu ún.amp asọ. Ma ṣe lo abrasive ose tabi epo.
• Ensure power is off at the circuit breaker before cleaning.
• Periodically check for loose connections or signs of wear. If any issues are found, consult a qualified electrician.

Laasigbotitusita

Awọn pato

Atilẹyin ọja ati Support

ECOELER provides a one-year limited warranty against manufacturing defects under normal use. Replacement or refund services are available. For support or warranty claims, please contact the seller via Amazon.

For additional information or assistance, visit the ECOELER Store on Amazon.