Fosmon Fosmon 3 Outlet + 3 Remote Control Combo

Fosmon Indoor Outdoor Remote Control Outlet Switch Combo Instruction Manual

Model: Fosmon 3 Outlet + 3 Remote Control Combo

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe and efficient use of your Fosmon Indoor Outdoor Remote Control Outlet Switch Combo. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Alaye Aabo

Ṣe akiyesi awọn iṣọra ailewu atẹle lati yago fun ipalara tabi ibajẹ ọja naa:

  • Ma ṣe rì ọja naa sinu omi tabi awọn olomi miiran.
  • Ensure the product is plugged into a GFCI (Ground Fault Circuit Interrupter) approved outlet when used outdoors.
  • When using outdoors, position the outlet hanging down to prevent moisture from entering the plug.
  • Do not exceed the maximum electrical ratings specified in this manual.
  • Jeki kuro ni arọwọto awọn ọmọde.
  • Ma ṣe tuka tabi yi ọja pada.
ETL Listed Mark on the back of the remote control outlet
Image: ETL Listed Mark. This image displays the ETL Listed mark on the back of the remote control outlet, indicating compliance with safety guidelines.
Weather-resistant remote control outlet with water droplets
Image: Weather-Resistant Design. The image shows the remote control outlet with water droplets, highlighting its weather-resistant cord and casing suitable for outdoor use.

Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

  • 3x Remote Control Outlet Receivers
  • 3x Remote Control Transmitters
  • 3x CR2032 Batteries (pre-installed in remotes)

Ọja Awọn ẹya ara ẹrọ

  • Wireless remote control for indoor and outdoor lighting and appliances.
  • Weather-resistant construction for outdoor applications.
  • Grounded 3-prong AC plug for standard outlets.
  • Pair and un-pair functionality for customizable control.
  • Operating range of up to 30 meters (98.4 feet) in open areas.
  • Compact remote design.
Compact remote control with dimensions 3.2in / 81mm length, 1.5in / 37mm width, 0.7in / 17mm thickness
Image: Compact Remote Dimensions. This image illustrates the compact size of the remote control, showing its dimensions: 3.2 inches (81mm) in length, 1.5 inches (37mm) in width, and 0.7 inches (17mm) in thickness.

Awọn pato

Max Range (Open Area)30 mita / 98.4 ẹsẹ
Batiri Latọna jijinCR2032 (pẹlu)
Lo AyikaIta gbangba ati inu
Orisi iṣanSingle 125VAC outlet
Max lọwọlọwọIye ti o ga julọ ti 15A
Itanna-wonsi125VAC, 60HZ, 15A (Resistive, General purpose)
125VAC, 60HZ, 10A / 1250W (Tungsten)
125VAC, 60HZ, 1/2HP TV-5
Igbohunsafẹfẹ433.92MHz
Awọn iwọn otutu ti nṣiṣẹ-13°F ~ 104°F / -25°C ~ 40°C
Awọn iwe-ẹriAkojọ ETL

Awọn ilana iṣeto

Pipọpọ Ibẹrẹ

The remote control outlets and remotes are pre-paired from the factory. If re-pairing is needed or if you wish to customize your control setup, follow these steps:

  1. Plug the remote control outlet receiver into an electrical wall outlet. The indicator light on the receiver will turn on.
  2. Within 29 seconds of plugging in the receiver, press the ON or OFF button on the desired remote control transmitter.
  3. The indicator light on the receiver will blink once to confirm successful pairing.

Note: Multiple outlets (receivers) can be paired to one remote, and multiple remotes can be paired to one outlet.

Diagram showing pairing process: plug in outlet, press remote button within 29 seconds
Image: Advanced Pair/Unpair Technology. This diagram illustrates the pairing process: 1) Plug the remote outlet into an electrical outlet. 2) Press the remote button within 29 seconds to establish a connection.

Unpairing

To unpair a remote from an outlet:

  1. Unplug the remote control outlet receiver from the wall outlet.
  2. Press and hold the ON button on the remote control transmitter.
  3. While still holding the ON button, plug the remote control outlet receiver back into the wall outlet.
  4. Continue holding the ON button for approximately 5 seconds until the indicator light on the receiver blinks rapidly, then release. This indicates successful unpairing.

Fifi sori ero

  • Lilo inu ile: Plug the remote control outlet into any standard 3-prong wall outlet.
  • Lilo ita gbangba:
    • Always plug into a GFCI approved outlet.
    • Hang the outlet with the plug facing downwards to prevent water entry.
    • Ensure the connected appliance is also suitable for outdoor use.
Diagram showing various Fosmon remote control outlets and switches that can be paired
Image: Expandable and Customizable System. This image demonstrates how the remote control outlets can be expanded and customized by pairing with other Fosmon indoor and outdoor remote control outlets and switches (sold separately).
Outdoor remote control outlet plugged into a wall outlet with plants around it
Image: Outdoor Installation Example. The image shows a remote control outlet installed outdoors, plugged into a wall outlet, with plants in the foreground, illustrating a typical outdoor setup.

Awọn ilana Iṣiṣẹ

Once the remote control outlet is plugged in and paired with its remote, operation is straightforward:

  • Tẹ awọn ON button on the remote control transmitter to turn on the connected appliance or light.
  • Tẹ awọn PAA button on the remote control transmitter to turn off the connected appliance or light.

The remote can control the outlet from a distance of up to 30 meters (98.4 feet) in open areas, allowing for convenient control of hard-to-reach outlets or outdoor lighting from indoors or a vehicle.

Hand holding a single-button remote control, with a Christmas tree visible through a window in the background
Image: Single Button Remote Operation. This image shows a hand holding the remote control, demonstrating its single-button operation to turn on lighting from a distance of 30m (98.4ft), with a Christmas tree visible through a window.

Itoju

Ninu

To clean the remote control outlet or transmitter, wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.

Rirọpo Batiri (Iṣakoso Latọna jijin)

The remote control uses a CR2032 battery. If the remote's range decreases or it stops responding, the battery may need replacement.

  1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
  2. Lo screwdriver kekere tabi owo lati ṣii yara naa.
  3. Yọ batiri CR2032 atijọ kuro.
  4. Fi batiri CR2032 titun sii pẹlu ẹgbẹ rere (+) ti nkọju si oke.
  5. Pa yara batiri naa ni aabo.

Laasigbotitusita

IsoroOwun to le FaOjutu
Outlet does not respond to remote.
  • Outlet not plugged in.
  • Batiri latọna jijin ti ku.
  • Outlet and remote are not paired.
  • Kosi ibiti o wa.
  • kikọlu.
  • Ensure outlet is securely plugged into a live electrical socket.
  • Rọpo batiri CR2032 ni isakoṣo latọna jijin.
  • Follow the "Initial Pairing" steps to re-pair the remote and outlet.
  • Move closer to the outlet.
  • Relocate the outlet or remote to minimize interference from other wireless devices.
Outlet indicator light does not turn on.
  • Ko si agbara si iṣan.
  • Ijade jẹ aṣiṣe.
  • Check the wall outlet with another appliance. Check circuit breaker.
  • Contact customer support if the outlet remains unresponsive after checking power.
Ilọsi latọna jijin ti dinku.
  • Batiri latọna jijin kekere.
  • Àwọn ìdènà tàbí ìdènà.
  • Rọpo batiri CR2032.
  • Ensure a clear line of sight between the remote and the outlet, or reduce the distance.

Atilẹyin ọja ati Support

This Fosmon product includes a limited lifetime warranty. For more details regarding the warranty policy or for technical support, please visit the official Fosmon webojula tabi kan si wọn onibara iṣẹ Eka.

Fosmon Webojula: www.fosmon.com

Iṣẹ onibara: Refer to the Fosmon webojula fun alaye olubasọrọ.

© 2023 Fosmon. Gbogbo ẹ̀tọ́ wa ni ipamọ́.

Awọn iwe aṣẹ ti o jọmọ - Fosmon 3 Outlet + 3 Remote Control Combo

Ṣaajuview Fosmon C-10798FAUS 24-wakati Mechanical Outlet Aago olumulo
Itọsọna olumulo fun Fosmon C-10798FAUS 24-Wakati Iwaju Iwaju Iwaju Mechanical Outlet Aago, iṣeto alaye, iṣẹ ṣiṣe, awọn pato, atilẹyin ọja, ati atilẹyin.
Ṣaajuview Fosmon C-10796US 125V/15A Indoor Weekly Digital Outlet Timer User Manual
User manual for the Fosmon C-10796US indoor weekly digital outlet timer. Learn how to set time, programs, operating modes, and safety warnings for this 125V/15A timer with two US socket outlets.
Ṣaajuview Fosmon Mechanical 2-Ijade ita gbangba Aago Olumulo Olumulo - Eto & Awọn ilana
Ìwé ìtọ́ni tó péye fún Fosmon Mechanical 2-Outlet Outdoor Timer. Kọ́ bí a ṣe ń ṣètò, ṣètò àkókò, àti lo aago ìta rẹ. Ó ní àwọn ìlànà, ìdánilójú, àti ìwífún nípa FCC.
Ṣaajuview Fosmon C-10707US Mechanical 1-Ijade ita gbangba Aago Olumulo Olumulo
Iwe afọwọkọ olumulo pipe fun Fosmon C-10707US darí aago ita gbangba 1-jade. Kọ ẹkọ nipa awọn ẹya ara ẹrọ rẹ, awọn pato, bii o ṣe le ṣeto awọn iṣeto, ṣeto akoko ti ọjọ, ati mu ṣiṣẹ/mu aago ṣiṣẹ. Pẹlu atilẹyin ọja ati alaye atunlo.
Ṣaajuview Fosmon Mechanical 2-Ijade ita gbangba Aago Olumulo Olumulo - Eto & Awọn ilana
Ṣe igbasilẹ Imọ-ẹrọ Fosmon Mechanical 2-Iwejade ita gbangba Aago olumulo Afowoyi. Gba awọn itọnisọna alaye lori siseto, iṣeto, awọn pato, ati laasigbotitusita fun aago ita gbangba Fosmon rẹ.
Ṣaajuview BN-LINK Wireless Remote Control Socket - User Manual and Setup Guide
Comprehensive guide for the BN-LINK Wireless Remote Control Socket, detailing technical specifications, product features, setup instructions, programming, resetting, troubleshooting, and important notes for safe and efficient operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.