Ọrọ Iṣaaju
Thank you for choosing the roborock Saros 20 Robot Vacuum and Mop. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
Ṣeto
Unpacking ati Placement
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Place the RockDock charging station in an open area with sufficient clearance for the robot to maneuver.
- Ensure at least 75cm (29.5 inches) clearance above the dock for tank removal.
- Ensure at least 40cm (15.7 inches) clearance on both sides of the dock.
- Ensure at least 120cm (47.2 inches) clearance in front of the dock.
Image: All components of the roborock Saros 20, including the robot vacuum, RockDock, mop pads, power cord, cleaning solution, and user manual.
Connecting the RockDock
- Connect the power cord to the back of the RockDock.
- Pulọọgi ohun ti nmu badọgba agbara sinu iṣan ogiri kan.
- Install the dock base by sliding it into the designated slot at the bottom front of the RockDock.
Video: A quick start guide demonstrating the initial setup of the roborock Saros 20, including unboxing, dock placement, and power connection.
Initial Charging and App Connection
Place the robot vacuum onto the RockDock to charge. For first-time use, download the Roborock app and follow the on-screen instructions to connect your device to your home Wi-Fi network (supports both 2.4 GHz and 5 GHz networks).
Video: Instructions on how to connect the roborock Saros 20 to the mobile application for smart control and mapping.
Pataki:
- For optimal mapping, run the robot in "Vacuum Only" mode twice before enabling mopping functions.
- Ensure your phone is on a 2.4GHz or 5GHz mixed Wi-Fi network during setup.
Awọn ilana Iṣiṣẹ
Awọn ọna mimọ
The roborock Saros 20 offers various cleaning modes accessible via the Roborock app:
- Igbale Nikan: For dry debris on all surfaces.
- Mop Nikan: For wet cleaning on hard floors.
- Igbale & Mop: Fífi ìfọ́mọ́ àti mímú omi kúrò ní àkókò kan náà.
- Isọdi adani: Adjust suction power, water flow, and cleaning routes for specific rooms or zones.
Smart Awọn ẹya ara ẹrọ
- AdaptiLift Chassis 3.0: Dynamically adjusts the robot's height to cross thresholds up to 3.46 inches and clean carpets up to 1.18 inches deep. The robot learns and remembers the best strategy for crossing obstacles.
- StarSight Autonomous System 2.0: Advanced 3D ToF sensors and an RGB camera enable precise navigation and obstacle recognition (over 300 types). The robot can detect and avoid small objects and cables.
- DirTect Technology: Identifies different types of messes (dry debris, liquid spills) and automatically adjusts cleaning strategy (boosts suction for dry, switches to mop-focused for liquid).
- Imọ-ẹrọ FlexiArm: Extends the side brush and mop to reach corners, edges, and under furniture (as low as 3.13 inches) for comprehensive coverage.
- AI-Powered App Control (SmartPlan 3.0): Learns your home layout and routines, optimizes cleaning sequences, and allows for voice control (e.g., "Hello Rocky").
Image: The roborock Saros 20 robot vacuum navigating around various household items on a wooden floor, demonstrating its obstacle avoidance capabilities.
Image: The roborock Saros 20 robot vacuum extending its side brush to clean along a wall and into a corner, highlighting its edge cleaning feature.
Itoju
Ìtọ́jú déédéé ń mú kí iṣẹ́ rẹ̀ dára síi, ó sì ń mú kí ọjọ́ ayé roborock Saros 20 rẹ gùn síi.
RockDock Maintenance
- Omi Omi Idọti Sofo: When the dirty water tank is full, remove it, empty the contents, rinse thoroughly, and securely close before reinstalling.
- Refill Clean Water Tank: Remove the clean water tank, fill with clean water, and securely close before reinstalling.
- Replace Dust Bag: When the dust bag is full, open the front panel, remove the old dust bag (the carrying handle will seal it), wipe the filter, and insert a new disposable dust bag securely.
- Clean Cleaning Tray: Remove the cleaning tray from the dock, rinse it clean, and wipe it dry before reinstalling.
- Clean Charging Contacts and Dock Location Beacon: Use a dry, soft cloth to wipe these components.
Video: A detailed guide on how to clean and maintain the RockDock of the roborock Saros 20, including emptying tanks and replacing the dust bag.
Robot Vacuum Maintenance
- Clean Dustbin and Filter: Remove the top cover, take out the dustbin, open the filter cover, remove the washable filter, and rinse both the dustbin and filter with water. Air-dry for at least 24 hours before reinstalling. (Do not use a brush or your fingers on the filter).
- Clean Mop Pads: Remove the mop pads from the robot. Clean them with water and air-dry.
- Awọn brushes ẹgbẹ mimọ: Remove the side brushes (using a screwdriver if necessary), clean any tangled hair or debris, and reinstall.
- Clean Omni-directional Wheel: Remove the omni-directional wheel, clean any tangled hair or debris, rinse with water, air-dry, and reinstall.
- Clean Main Brushes: Remove the main brush cover, remove the main brushes, clean any tangled hair or debris, wipe the main wheels, and reinstall the brushes and cover ensuring correct fitting.
Video: Instructions on how to maintain the roborock Saros 20 robot vacuum, covering cleaning of the dustbin, filters, brushes, and wheels.
Laasigbotitusita
If you encounter issues with your roborock Saros 20, refer to the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Robot not turning on. | Ipele batiri kekere. | Place the robot on the RockDock to charge. |
| Robot di nigbagbogbo. | Obstacles (cables, small items) or high thresholds. | Clear the area of obstacles. Ensure AdaptiLift Chassis 3.0 is enabled in the app for high thresholds. |
| Iṣẹ ṣiṣe mimọ ti ko dara. | Clogged brushes/filters, full dustbin, or dirty mop pads. | Clean/replace brushes and filters. Empty dustbin. Clean mop pads. |
| Mop pads detaching during cleaning. | Improper installation or worn-out pads. | Ensure mop pads are securely attached. Replace if worn. |
| App asopọ oran. | Incorrect Wi-Fi password, wrong network band, or robot not in pairing mode. | Ensure correct Wi-Fi credentials. Check phone is on 2.4/5GHz mixed network. Reset Wi-Fi on robot (press Power and Dock buttons simultaneously for 3 seconds). |
For more detailed troubleshooting, please refer to the Roborock app or the official Roborock webojula.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | roborock |
| Orukọ awoṣe | Roborock Saros 20 |
| Agbara afamora | 36,000 Pa |
| Idiwo Líla | Up to 3.46 inches (double-layer threshold) |
| Carpet Cleaning Depth | Titi di 1.18 inches |
| Robot Giga | 3.14 inches (Ultra Slim) |
| Mop Washing Temperature | 212°F (Hot Water Wash) |
| Iwọn otutu gbigbẹ Mop | 131°F (Hot Air Drying) |
| Dust Emptying Interval | Up to 65 days (auto dust emptying) |
| Eto lilọ kiri | StarSight Autonomous System 2.0 (3D ToF sensors, RGB camera) |
| Obstacle Recognition | Over 300 types of obstacles |
| Igbesi aye batiri | 180 iṣẹju |
| Ariwo Ipele | 55 Decibels |
| Ọna Iṣakoso | App, Push Button, Voice (Amazon Alexa, Google Home, Siri, Matter) |
| Awọn Iwọn Nkan (L x W x H) | 15"L x 18.7"W x 19.2"H |
| Iwọn Nkan | 27.12 iwon |
Atilẹyin ọja & Atilẹyin
The roborock Saros 20 comes with a standard manufacturer's warranty. For specific warranty details and to register your product, please visit the official roborock webojula.
Awọn Eto Idaabobo
Awọn eto aabo ti o gbooro wa fun rira:
- Eto Idaabobo Ọdun 2: Isanwo lẹẹkanṣoṣo ti $119.99
- Eto Idaabobo Ọdun 3: Isanwo lẹẹkanṣoṣo ti $159.99
- Idaabobo pipe: Monthly payment of $16.99 (covers all eligible past and future purchases)
For technical support, troubleshooting assistance, or to inquire about service, please contact roborock customer service through the app or their official webojula.