1. Ifihan
This manual provides essential information for the safe and efficient operation of your DATOUBOSS 12V 1800W Hybrid Solar Inverter. This device integrates a solar charge controller, an inverter, and a battery charger into one unit, offering a comprehensive solution for off-grid and hybrid power systems. It is designed to convert 12V DC power to 230V AC pure sine wave power, suitable for various household and office appliances.
Jọwọ ka iwe afọwọkọ yii daradara ṣaaju fifi sori ati lo, ki o si mu u duro fun itọkasi ọjọ iwaju.
2. Awọn ilana aabo
Observe the following safety precautions during installation, operation, and maintenance:
- Fifi sori gbọdọ wa ni ošišẹ ti nipasẹ oṣiṣẹ eniyan.
- Ensure all wiring is correctly connected and securely fastened to prevent loose connections that can cause overheating.
- Má ṣe fi inverter hàn sí òjò, yìnyín, ìfọ́nrán, tàbí omi èyíkéyìí.
- Do not disassemble the unit. There are no user-serviceable parts inside.
- Rii daju pe fentilesonu to peye ni ayika ẹrọ oluyipada lati ṣe idiwọ igbona.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE) lakoko fifi sori ẹrọ ati itọju.
- Disconnect all power sources (solar, battery, AC grid) before performing any maintenance or wiring.
- This inverter is designed for indoor use or in a protected environment.
3. Ọja Ipariview
The DATOUBOSS Hybrid Solar Inverter combines three functions in one unit: a solar inverter, a battery charger, and an MPPT charge controller. This design simplifies cabling and optimizes space utilization.
olusin 3.1: Iwaju view of the DATOUBOSS Hybrid Solar Inverter showing key features and dimensions. The inverter has a maximum PV input power of 2500W, maximum PV input current of 15A, and a rated input voltage of 220V/230V/240V. Dimensions are approximately 31 cm (12.2 in) height, 25 cm (9.8 in) width, and 9.1 cm (3.58 in) depth.
3.1 Idanimọ paati
Nọmba 3.2: Alaye view of the inverter's interfaces. The front panel features an LCD display and function key control area. The right side includes an RS485-2 communication interface (BMS communication). The left side has a power on/off switch and an RS485-1 communication interface (External communication/WIFI). The bottom interface includes AC input (on-grid) terminal, Earth wire, AC output, Fan, Battery terminal port, and PV input terminal port.
4. Eto ati fifi sori
The inverter is designed for wall-mounted installation. Ensure the mounting surface is strong enough to support the unit's weight and that there is sufficient clearance for ventilation.
4.1 Wiring aworan atọka
Tẹle aworan onirin daradara. Gbogbo awọn asopọ gbọdọ wa ni aabo ati pe o jẹ pola ti o tọ.
Figure 4.1: Wiring diagram illustrating connections for the solar system, power grid, 12V battery, and AC output. The solar input connects to the PV input terminal, the grid connects to the AC input terminal, the 12V battery connects to the battery terminal, and loads connect to the AC output terminal.
Figure 4.2: Comprehensive wiring and technical specifications diagram. This image details the connections for the solar system (Max PV Input Power 2500W, MPPT Tracking Range 30-240VDC), power grid (Rated Voltage 220V/230V/240V), 12V battery (Lead-acid/Lithium, Max PV Charging Current 100A), and AC output (Rated Output Power 1800W, Pure Sine Wave).
4.2 Asopọ Igbesẹ
- Iṣagbesori: Securely mount the inverter to a vertical surface using appropriate fasteners.
- Asopọ batiri: Connect the 12V battery bank to the battery terminals. Ensure correct polarity (positive to positive, negative to negative).
- Isopọmọ igbimọ oorun: So array panel oorun mọ awọn ebute titẹ sii PV. Ṣe akiyesi polarity ti o tọ ki o rii daju pe PV ṣii circuit voltage wa laarin awọn pàtó kan ibiti o.
- AC Input (Grid) Connection: If connecting to the utility grid, connect the AC input from the grid to the designated AC input terminals.
- AC Output (Load) Connection: So awọn ẹru AC rẹ pọ mọ awọn ebutejade AC.
- Ilẹ: Connect the inverter to an earth ground using the designated earth wire terminal.
- Agbara Tan: After verifying all connections, switch on the power.
5. Awọn ilana Iṣiṣẹ
The inverter features an LCD display and control buttons for configuration and monitoring.
Ifihan ati Iṣakoso LCD 5.1
The LCD displays real-time system status, including voltage, power, battery status, and operational mode. Error codes are displayed for quick troubleshooting.
5.2 Awọn ọna gbigba agbara
The inverter offers versatile charging and output modes to suit different energy management needs:
Figure 5.1: Illustration of the four charging modes and three charge output working modes. Charging modes include AC priority, Solar priority, Mixed loading (Solar and mains), and Solar only. Output modes include Solar priority, Utility priority, and SBU mode (Solar-Battery-Utility).
- Four Charging Modes:
- AC Priority: Tí kò bá sí agbára iná mànàmáná, a ó lo agbára oòrùn láti gba agbára bátìrì náà.
- Iyanju Oorun: Charging with solar energy priority. If no solar power is available, the battery is charged via the power grid.
- Mixed Loading: Agbara oorun ati agbara orisun le gba agbara batiri ni akoko kanna.
- Oorun Nikan: Agbara oorun nikan ni a le gba agbara batiri naa.
- Three Configurable Output Modes:
- Àkọ́kọ́ PV: Prioritizes power from solar panels.
- Àkọ́kọ́ Àkójọpọ̀: Prioritizes power from the utility grid.
- Hybrid Inverter Priority (SBU Mode): Ó ń fi oòrùn sí ipò àkọ́kọ́, lẹ́yìn náà bátírì, lẹ́yìn náà, ohun èlò ìlò.
6. Batiri ibamu
The inverter is compatible with various 12V battery types, including lead-acid (sealed, AGM, gel, flooded) and lithium batteries. It features a built-in Battery Management System (BMS) to prevent overcharging and deep discharging, extending battery life.
Figure 6.1: The inverter supports various battery types including GSL (Gel Sealed Lead-Acid), LN (Lithium-ion), FLB (Flooded Lead-Acid), LI (LiFePO4), SLA (Sealed Lead-Acid), and USER-defined. Users can configure the battery type via the LCD display. The maximum battery charging current is 100A.
7. Abojuto
The inverter provides real-time monitoring capabilities through its integrated LCD display and optional WiFi module.
7.1 Abojuto WiFi
With the optional WiFi module, users can monitor the inverter's performance in real-time via a web interface or a dedicated mobile application, eliminating the need to check the controller's LCD directly.
Figure 7.1: The inverter is WiFi monitoring ready, allowing users to view system performance remotely via a web kiri tabi mobile app.
8. Awọn iṣẹ Idaabobo
The DATOUBOSS Hybrid Solar Inverter incorporates multiple protection features to ensure safe and reliable operation of your power system.
Figure 8.1: The inverter provides comprehensive protection against overload, short circuit, and surge hazards. Specific protections include reverse connection protection, short circuit protection, high temperature protection, overload protection, overcurrent protection, and over-discharge protection.
Figure 8.2: This diagram highlights the inverter's multiple protection features, including overvoltage protection, short circuit protection, overcharge protection, over-discharge protection, temperature protection, undervoltage protection, overload protection, and overcurrent protection.
9. Awọn pato
Detailed technical specifications for the DATOUBOSS 12V 1800W Hybrid Solar Inverter (Model: DT-1218M-A-EU).
Figure 9.1: Detailed technical parameters including Product Name: Solar Inverter, Model: DT-1218M, Protection Degree: IP20, Rated Power: 1800W. Battery parameters: DC Input 12VDC, Max. AC Charging Current 65A, Max. PV Charging Current 100A, Max. Charging Current 100A. PV Input parameters: Max. PV Input Power 2500W, Max. PV Input Voltage (Voc) 300VDC, Max. PV Input Current 15A, MPPT Tracking Range 30-240VDC, Rated PV Input Voltage 180VDC, Number of MPPT: 1.
Figure 9.2: Technical specifications for Model DT-1218M. Includes PV input (Max PV Power 2500W, MPPT Tracking Range 30-240VDC), Battery & Charging (Type: Custom, 12VDC, Max PV Charging Current 100A), Hybrid Operation (Rated Input Voltage 220V/230V/240V, Rated Output Power 1800W, Pure Sine Wave), AC Input/Output, Regular Parameters (Max Conversion Efficiency 94%, MPPT Tracking Efficiency >99.9%), Environment (Operating Temp -10°C to 50°C), Dimension and Weight (Product Size 310x250x91mm, N.W. 4.0kg), and Protection features.
Figure 9.3: Continuation of technical specifications, detailing On-Grid Operation (Rated Output Power 1800W, 220V/230V/240VAC), Off-Grid Operation (Rated Input Voltage 220V/230V/240V, Rated Output Power 1800W, Pure Sine Wave), and environmental conditions.
| Paramita | Iye |
|---|---|
| Brand | DATOUBOSS |
| Nọmba awoṣe | DT-1218M-A-EU |
| Ti won won Agbara | 1800 Wattis |
| Voltage | 12 Volts |
| Max PV Input Power | 2500W |
| Ti o pọju PV Input Voltage (Ohun) | 300V DC |
| MPPT Àtòjọ Ibiti | 30-240V DC |
| Max PV Input Lọwọlọwọ | 15A |
| Max Hybrid Charging Current | 100A |
| AC wu Voltage | 220V/230V/240V AC |
| AC o wu Igbohunsafẹfẹ | 50/60Hz |
| Iwajade Waveform | Wave Sine Sure |
| Ibamu batiri | 12V Lead-acid (sealed, AGM, gel, flooded), Lithium |
| Idaabobo ìyí | IP20 |
| Awọn iwọn otutu ti nṣiṣẹ | -10°C si 50°C |
| Awọn iwọn (L*W*H) | 310 x 250 x 91 mm |
| Apapọ iwuwo | 4.0 kg |
10. Laasigbotitusita
This section provides guidance for common issues. The LCD display will show error codes to assist in diagnosis.
| Error Code / Symptom | Owun to le Fa | Ojutu |
|---|---|---|
| Apọju Itaniji | Connected load exceeds inverter's rated power. | Reduce the connected load. Check appliance power ratings. |
| Ayika kukuru | Short circuit detected at AC output. | Disconnect all loads and check wiring for shorts. |
| Iwọn otutu giga | Inverter naa n gbona ju nitori ategun ti ko dara tabi ẹru ti o pọ ju. | Ensure adequate airflow around the unit. Reduce load if necessary. Check fan operation. |
| Batiri Low Voltage | Batiri voltage is below the acceptable threshold. | Charge the battery. Check battery connections and health. |
| PV Overvoltage | Solar nronu input voltage exceeds maximum limit. | Verify solar panel configuration and ensure Voc is within range. |
Ti ọrọ naa ba wa lẹhin igbiyanju awọn ojutu wọnyi, jọwọ kan si atilẹyin alabara.
11. Itọju
Itọju deedee ṣe idaniloju iṣẹ ti o dara julọ ati igba pipẹ ti inverter rẹ.
- Ninu: Máa fọ ìta inverter náà lẹ́ẹ̀kọ̀ọ̀kan pẹ̀lú aṣọ gbígbẹ. Rí i dájú pé àwọn ihò afẹ́fẹ́ kò ní eruku àti ìdọ̀tí.
- Awọn ayẹwo Asopọmọra: Annually inspect all wiring connections (battery, solar, AC input/output) for tightness and corrosion. Tighten any loose connections.
- Ayewo Batiri: Regularly check the battery terminals for corrosion and ensure they are clean and tight. For flooded lead-acid batteries, check electrolyte levels and top up with distilled water if necessary.
- Ṣayẹwo Ayika: Rii daju pe ayika fifi sori ẹrọ wa laarin iwọn otutu pato ati awọn sakani ọriniinitutu.
12. Atilẹyin ọja ati Support
The DATOUBOSS 12V 1800W Hybrid Solar Inverter comes with a 2-odun olupese atilẹyin ọja.
For technical support, warranty claims, or service inquiries, please contact your retailer or DATOUBOSS customer service. Provide your product model number (DT-1218M-A-EU) and serial number (if applicable, e.g., S/N:86HFP1800250627507500-405) when contacting support.