Langsdom AirSwim Neo Bone Conduction Headphones User Manual

1. Ifihan

The Langsdom AirSwim Neo bone conduction headphones are engineered for versatile use, offering high-performance audio in diverse environments. Featuring IP68 waterproofing, a comfortable skin-friendly silicone design, and dual Bluetooth V6.0 and MP3 modes, these headphones are suitable for activities such as swimming, running, and general daily use. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Ohun ti o wa ninu Apoti

• Langsdom AirSwim Neo Bone Conduction Headphones
• Ngba agbara oofa / Data Cable
• Afowoyi Olumulo (iwe-ipamọ yii)

3. Ọja Ipariview

Familiarize yourself with the key features and design elements of your AirSwim Neo headphones.

Nọmba 3.1: Headphones in use by a swimmer, demonstrating the built-in 32GB memory for MP3 playback, essential for underwater listening.

Nọmba 3.2: Ergonomic design for comfortable and secure fit during extended wear, featuring skin-friendly silicone and a bio-curved shape.

Nọmba 3.3: The headphones are designed for both water and land activities, offering IP68 waterproof protection for swimming and durability for various sports.

Nọmba 3.4: Ti abẹnu view illustrating the advanced Bluetooth 6.0 technology for strong signal, fast connection, and low power consumption.

Nọmba 3.5: Battery performance details, indicating up to 8 hours of playtime in Bluetooth mode and 4 hours in MP3 mode.

Nọmba 3.6: The AI single mic ENC algorithm ensures clear call quality by reducing environmental noise.

4. Eto

4.1 Gbigba agbara akọkọ

Before first use, fully charge the headphones. Connect the magnetic charging cable to the charging port on the headphones and the other end to a USB power source (e.g., computer USB port or USB wall adapter). A full charge takes approximately 1.5 hours. The indicator light will change to show charging status (e.g., red for charging, blue for fully charged).

4.2 Agbara Tan / Pa

• Agbara Tan: Press and hold the Power/Multi-function button for 3 seconds until the indicator light flashes and you hear a power-on prompt.
• Agbara Pa: Press and hold the Power/Multi-function button for 5 seconds until the indicator light turns off and you hear a power-off prompt.

4.3 Sisopọ Bluetooth

1. Rii daju pe awọn agbekọri ti wa ni pipa.
2. Press and hold the Power/Multi-function button for 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. Lori ẹrọ rẹ (foonuiyara, tabulẹti, kọmputa), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
4. Select "AirSwim Neo" from the list of found devices.
5. Once paired, the indicator light will flash blue slowly, and you will hear a connection confirmation.

Awọn agbekọri yoo gbiyanju laifọwọyi lati tun sopọ si ẹrọ ti o so pọ to kẹhin nigbati o ba wa ni tan-an.

4.4 MP3 Mode (Music Transfer)

The AirSwim Neo features a built-in 32GB memory for offline music playback, ideal for swimming or when a Bluetooth connection is not desired.

1. Connect the magnetic charging/data cable to the headphones.
2. Connect the USB end of the cable to your computer. The headphones will be recognized as a removable disk.
3. Fa ati ju orin ti o fẹ silẹ files (MP3, WMA, WAV, APE, FLAC formats are supported) into the headphone's storage folder.
4. Mu disiki yiyọ kuro lailewu ṣaaju ki o to ge asopo okun naa.

Alternatively, an OTG adapter can be used to connect the headphones to compatible mobile devices for music transfer.

5. Awọn ilana Iṣiṣẹ

5.1 Yíyípadà Láàárín Àwọn Ìgbékalẹ̀ Bluetooth àti MP3

Press the Mode button (often combined with the Power/Multi-function button or a dedicated button) to switch between Bluetooth and MP3 playback modes. A voice prompt will confirm the current mode.

5.2 Orin Sisisẹsẹhin idari

• Ṣiṣẹ/Daduro: Kukuru tẹ awọn Olona-iṣẹ bọtini.
• Iwọn didun Up: Tẹ bọtini didun + kukuru.
• Iwọn didun isalẹ: Tẹ bọtini didun kukuru.
• Orin t’okan: Tẹ bọtini Iwọn didun + fun igba pipẹ.
• Tẹlẹ Orin: Tẹ bọtini Iwọn didun fun igba pipẹ.

5.3 ipe Management

• Idahun/Ipe Ipari: Short press the Multi-function button during an incoming call or to end an active call.
• Kọ Ipe: Tẹ bọtini Multi-function fun igba pipẹ lakoko ipe ti nwọle.
• Nọmba Ikẹhin Tun Tun: Double-press the Multi-function button when not on a call.

5.4 Iranlọwọ ohun

Triple-press the Multi-function button to activate your device's voice assistant (e.g., Siri, Google Assistant).

5.5 Waterproof Usage (Swimming)

For swimming and other water-based activities, it is recommended to use the MP3 mode. Bluetooth signals do not transmit effectively through water. Ensure the charging port is clean and dry before and after water exposure. The IP68 rating allows submersion up to 2 meters.

6. Itọju

6.1 Ninu

• Mu awọn agbekọri nu pẹlu asọ, damp aṣọ lẹ́yìn lílo kọ̀ọ̀kan, pàápàá jùlọ lẹ́yìn ìdánrawò tàbí wíwẹ̀.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the silicone material and waterproof seals.
• Ensure the charging port is free of debris and dry before charging.

6.2 Ibi ipamọ

Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headphones to prevent damage to the frame.

6.3 mabomire Itọju

After using the headphones in chlorinated or saltwater, rinse them thoroughly with fresh water and allow them to air dry completely before charging or storing. This helps prevent corrosion and maintains the integrity of the waterproof seals.

7. Laasigbotitusita

• Ko si Agbara: Ensure the headphones are fully charged. If the issue persists, try a different charging cable or USB port.
• Ko si Ohun: Check the volume level on both the headphones and your connected device. Ensure the headphones are correctly paired in Bluetooth mode or that music files are properly loaded in MP3 mode.
• Ko le So Bluetooth pọ: Ensure the headphones are in pairing mode (red and blue flashing light). Turn off and on your device's Bluetooth, then try pairing again. Clear previous pairings on your device if necessary.
• Music Transfer Issues: Verify the magnetic charging/data cable is securely connected. Ensure music files are in supported formats (MP3, WMA, WAV, APE, FLAC). Try connecting to a different USB port on your computer.
• Didara ipe ti ko dara: Ensure the microphone is not obstructed. Check for strong Bluetooth connection. The AI Call Noise Reduction feature works best in moderately noisy environments.

Tí ìṣòro bá ń bá a lọ, wo apá ìrànlọ́wọ́ fún ìrànlọ́wọ́ síwájú sí i.

8. Awọn pato

9. atilẹyin ọja Information

The Langsdom AirSwim Neo headphones come with a 1-odun lopin atilẹyin ọja Láti ọjọ́ tí a ti rà á. Àtìlẹ́yìn yìí bo àwọn àbùkù iṣẹ́-ọnà àti iṣẹ́-ọnà lábẹ́ lílo déédéé. Kò bo ìbàjẹ́ tí ó wáyé nípasẹ̀ ìlòkulò, jàǹbá, àtúnṣe tí a kò fún ní àṣẹ, tàbí ìbàjẹ́ déédé. Jọ̀wọ́ pa ẹ̀rí ríra rẹ mọ́ fún àwọn ẹ̀tọ́ àtìlẹ́yìn.

10. Atilẹyin

For further assistance, technical support, or warranty inquiries, please contact Langsdom customer service through the retailer where you purchased the product or visit the official Langsdom webojula fun alaye olubasọrọ.

Awọn orisun Ayelujara:

• Langsdom Official Webojula: Visit the Langsdom Store on Amazon