Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your Hilitand AC 110V Swimming Pool Pump Timer. This programmable timer is designed to automate the ON/OFF cycles of your swimming pool pump, heater filter, and other outdoor water systems, enhancing efficiency and convenience. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Alaye Aabo
WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician or service personnel in accordance with all local and national electrical codes.
- Always disconnect power at the circuit breaker before installing or servicing the timer.
- Ensure the timer is installed in a location protected from direct water spray and excessive moisture, despite its durable design.
- Rii daju pe voltage and current ratings of your pump or appliance do not exceed the timer's specifications.
- Má ṣe gbìyànjú láti ṣí tàbí tún aago náà ṣe fúnra rẹ. Tọ́ka gbogbo iṣẹ́ ìtọ́jú náà sí àwọn òṣìṣẹ́ tó péye.
- Pa awọn ọmọde kuro ni awọn ẹrọ itanna.
Package Awọn akoonu
Carefully unpack your timer and verify that all items are present and undamaged. If any items are missing or damaged, please contact customer support.
- 1 x Hilitand Pool Pump Timer (with upper and lower cover)
- 2 x Awọn asopọ
- 2 x Awọn ẹrọ ifoso
- 4 x Skru
- 1 x Itọsọna olumulo
Image: Contents of the Hilitand Pool Pump Timer package, including the timer unit, two connectors, two washers, four screws, and the user manual.
Ọja Pariview
The Hilitand AC 110V Pool Pump Timer features a robust design and user-friendly interface for reliable operation.
- Iṣakoso ti a le ṣeto: Supports up to 28 ON/OFF cycles per day, allowing for precise scheduling over a 7-day cycle.
- Ni wiwo olumulo-ore: Equipped with an easy-to-read LCD display for simplified programming and monitoring.
- Ikole ti o tọ: Made from robust PC material, designed to withstand outdoor conditions from -10°C to 40°C (14°F to 104°F).
- Afẹyinti Agbara: Includes a built-in 200mAh lithium-ion battery, providing up to 60 days of operation during power outages to retain settings.
- Ohun elo to pọ: Suitable for swimming pool pumps, heater filters, and various other outdoor water systems requiring timed control.
Aworan: Iwaju view of the Hilitand Pool Pump Timer, enclosed in its clear protective casing, showing the digital display and control buttons.
Awọn pato
| Nkan Iru | Pool fifa Aago |
| Ohun elo | PC (Polycarbonate) |
| Aṣiṣe akoko | ±1 Second / Day (at 25℃) |
| TAN/PA Awọn iṣẹ | Àwọn ẹ̀rọ ON/OFF 28 |
| Agbara agbara | ≤2W |
| Igba aye | Mechanical: 10^7 cycles, Electrical: 10^7 cycles |
| Ifihan | Iboju LCD |
| Aarin ti o kere julọ | Iṣẹju 1 |
| Afẹyinti Agbara | Built-in 200mAh Lithium-Ion Battery (up to 60 days) |
| Awọn iwọn otutu ti nṣiṣẹ | -10°C si 40°C (14°F si 104°F) |
| Ọriniinitutu ti nṣiṣẹ | 35-85% RH |
| Ikojọpọ Resistive | 25A (ensure connected load does not exceed this) |
| Awọn iwọn Ọja (D x W x H) | 6.69" x 4.72" x 3.54" (170mm x 120mm x 90mm isunmọ.) |
Image: The Hilitand Pool Pump Timer with its dimensions clearly marked: 90mm (3.5in) width, 158mm (6.2in) height, and 64mm (2.5in) depth.
Eto ati fifi sori
Follow these steps for safe and correct installation of your timer.
1. Iṣagbesori Aago
- Choose a suitable outdoor location that is easily accessible, protected from direct sunlight, and within reach of the power source and the appliance to be controlled.
- Use the provided screws to securely mount the timer's housing to a flat, stable surface. Ensure the housing is level.
2. Awọn itọnisọna Wiring
IMPORTANT: Ensure power is OFF at the circuit breaker before proceeding with any wiring.
- Open the timer's protective cover.
- Identify the input terminals (power supply) and output terminals (to appliance). Refer to the wiring diagram usually printed inside the timer or on the unit itself.
- Connect the AC 110V power supply wires to the input terminals. Use appropriate wire gauges for your application.
- Connect the wires leading to your pool pump or heater filter to the output terminals.
- Ensure all connections are tight and secure. Use the provided connectors and washers to seal cable entries, maintaining the timer's weather resistance.
- Pa ideri aabo ni aabo.
Image: The Hilitand Pool Pump Timer with its clear outer casing removed, revealing the internal timer unit and the wiring terminals at the bottom for electrical connections.
Awọn ilana Iṣiṣẹ
Familiarize yourself with the control panel buttons:
- C/R: Clear/Reset button.
- D+: Day adjustment.
- H+: Hour adjustment.
- M+: Minute adjustment.
- P: Program button (to enter/exit programming mode).
- Aami aago: Set current time/day.
- Afowoyi: Manual ON/OFF/AUTO override.
Aworan: A sunmọ-soke view of the Hilitand Pool Pump Timer's control panel, showing the LCD display and the various buttons for setting time and programming.
1. Ṣiṣeto Akoko ati Ọjọ lọwọlọwọ
- Tẹ awọn Aami aago bọtini.
- Nigba dani awọn Aami aago, tẹ D+ lati ṣeto awọn ti isiyi ọjọ ti awọn ọsẹ.
- Nigba dani awọn Aami aago, tẹ H+ lati ṣeto awọn ti isiyi wakati.
- Nigba dani awọn Aami aago, tẹ M+ lati ṣeto awọn ti isiyi iseju.
- Tu silẹ Aami aago Bọ́tìnì náà. Àkókò náà ti wà nílẹ̀ báyìí.
2. Ṣíṣeto Àwọn Ìrìn Àkókò TÍTÓN/PÁ
Aago naa n ṣe atilẹyin fun awọn eto ON/OFF to 28. Eto kọọkan ni akoko ON ati akoko PA.
- Tẹ awọn P bọ́tìnì kan lẹ́ẹ̀kan. Ìfihàn náà yóò fi "1 ON" hàn.
- Tẹ D+ to select the day(s) for this program (e.g., Mon-Fri, Sat-Sun, every day, specific days).
- Tẹ H+ láti ṣètò wákàtí ON tí a fẹ́.
- Tẹ M+ láti ṣètò ìṣẹ́jú ON tí a fẹ́.
- Tẹ P lẹ́ẹ̀kan sí i. Ìfihàn náà yóò fi "PA 1" hàn.
- Tẹ D+ to select the day(s) for this OFF program (usually matches the ON program).
- Tẹ H+ to set the desired OFF hour.
- Tẹ M+ to set the desired OFF minute.
- Repeat steps 1-8 for additional ON/OFF programs (up to 28).
- Lẹhin ti ṣeto gbogbo awọn eto ti o fẹ, tẹ bọtini naa Aami aago bọtini lati jade kuro ni ipo siseto ki o pada si ifihan akoko lọwọlọwọ.
3. Manual Control / Override
Awọn Afowoyi button allows you to override the programmed settings temporarily.
- Tẹ awọn Afowoyi button repeatedly to cycle through modes:
- LATI: The appliance will remain ON continuously, overriding all programs.
- PA: The appliance will remain OFF continuously, overriding all programs.
- LATIO: The timer will operate according to the programmed ON/OFF cycles. This is the standard operating mode.
4. Ṣíṣe àtúnṣe aago náà
To clear all settings and reset the timer to its factory defaults, press the C/R button using a pointed object (e.g., a pen tip). You will then need to re-set the current time and all programs.
Itoju
- Ninu: Mu ese ita kuro pẹlu asọ, damp cloth. Do not use abrasive cleaners or solvents. Ensure the protective cover is always clean and clear for display visibility.
- Batiri Afẹyinti: The built-in lithium-ion battery maintains time and program settings during power outages. No user maintenance is required for the battery. If the display is blank or settings are lost frequently after power interruptions, the battery may need professional servicing.
- Ayewo: Periodically inspect the wiring connections and the timer housing for any signs of damage or wear.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ifihan aago naa ṣofo. | Kò sí ìpèsè agbára; bátìrì inú ti dínkù. | Check power connections and circuit breaker. If power is present, the internal battery might be fully discharged; allow time for it to charge. |
| Ẹ̀rọ náà kìí tan/pa ní àkókò tí a ṣètò. | Timer is in Manual ON/OFF mode; incorrect program settings; wiring issue. | Rí i dájú pé aago aago náà wà nílẹ̀ AUTO mode. Verify program settings (ON/OFF times, days). Check wiring connections. |
| Time or programs are lost after a power outage. | Batiri afẹyinti inu ti pari tabi bajẹ. | The internal battery may need to charge. If the issue persists, contact customer support. |
| Awọn bọtini ko dahun. | Temporary software glitch; timer needs reset. | Tẹ awọn C/R button to reset the timer. Re-enter all settings. |
Atilẹyin ọja ati Support
Hilitand products are manufactured to high-quality standards. For warranty information or technical support, please refer to the specific warranty card included with your product or contact Hilitand customer service through the retailer where the product was purchased. Please have your model number (AC 110V) and purchase date available when contacting support.