Thermalright Assassin X 120R Digital Black CPU Cooler Instruction Manual

Ọrọ Iṣaaju

The Thermalright Assassin X 120R Digital Black is a high-performance CPU air cooler designed to provide efficient thermal management for your computer's processor. It features a digital display for real-time monitoring of CPU and GPU parameters, advanced AGHP heat pipe technology, and a high-speed PWM fan. This manual provides essential information for the proper installation, operation, and maintenance of your CPU cooler.

Package Awọn akoonu

Please verify that all components are present in the package before proceeding with installation.

• Thermalright Assassin X 120R Digital Black CPU Cooler (Heatsink with integrated digital display and fan)
• Installation accessories (mounting brackets, screws, spacers for various sockets)
• Gbona lẹẹ

Eto ati fifi sori

This section guides you through the installation process. Ensure your system is powered off and unplugged before beginning. Refer to your motherboard manual for specific instructions on CPU cooler installation points.

Ibamu

The Assassin X 120R Digital Black CPU Cooler is compatible with the following CPU sockets:

• Intel: LGA 1851, LGA 1700, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1200
• AMD: AM4, AM5

Note: For AMD platform installation, the original motherboard backplate is required.

Gbogbogbo fifi sori Igbesẹ

1. Mura modaboudu: Identify the correct mounting brackets for your CPU socket (Intel or AMD). Remove any existing CPU cooler and clean the CPU surface of old thermal paste using isopropyl alcohol.
2. Waye Lẹẹ Gbona: Apply a small amount of thermal paste (included) to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
3. Fi Hardware Iṣagbesori sori ẹrọ: Attach the appropriate backplate (if required for Intel) and standoffs to the motherboard. Secure the mounting arms to the standoffs.
4. Gbe Itutu naa si: Carefully place the heatsink onto the CPU, aligning the mounting holes on the cooler with the mounting arms.
5. Ṣe aabo fun itutu naa: Use the provided screws to secure the heatsink to the mounting arms. Tighten screws in a diagonal pattern until snug, but do not overtighten.
6. Connect Fan and Digital Display Cables:
   • So okùn oní-pin 4 PWM pọ̀ mọ́ orí CPU_FAN lórí modaboudu rẹ.
   • Connect the digital display cable to an available USB 2.0 header on your motherboard.

Olusin 1: Pariview of the Thermalright Assassin X 120R Digital Black CPU Cooler.

Figure 2: Dimensions of the Assassin X 120R Digital Black CPU Cooler, showing height, width, and depth.

olusin 3: Isunmọ view of the AGHP (Anti-Gravity Heat Pipe) technology, highlighting the 4x6mm heat pipes for efficient heat transfer.

Figure 4: Dimensions of the TL-P12 120mm PWM fan, measuring 120x120x25mm.

Awọn ilana Iṣiṣẹ

The Assassin X 120R Digital Black features a digital display and a PWM controlled fan for optimal performance.

Digital Display Functionality

The integrated digital screen provides real-time monitoring of critical system parameters. With the TRCC software, you can customize the display to show:

• Sipiyu otutu
• Sipiyu iṣamulo
• Graphics Card Temperature
• Graphics Card Utilization

This allows for easy access to system information at a glance. The display's color can also be adjusted via the TRCC software, potentially changing based on temperature or usage.

Figure 5: Close-up of the digital display showing CPU temperature and usage.

Olusin 6: Example of the TRCC software interface for customizing the digital display.

PWM Fan Control

The 120mm PWM fan automatically adjusts its speed (up to 2000 RPM) based on the CPU temperature, as controlled by your motherboard's fan headers. This ensures optimal cooling performance while minimizing noise levels. No manual adjustment is typically required for fan speed.

Itoju

Itọju deedee n ṣe iranlọwọ lati rii daju pe igba pipẹ ati iṣẹ ṣiṣe to dara julọ ti ẹrọ tutu CPU rẹ.

• Pipa eruku: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to remove dust accumulation from the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning.
• Ayewo Olufẹ: Check the fan for any signs of wear, damage, or unusual noise. Ensure the fan cable is securely connected.
• Lẹẹ igbona: While not frequently required, if you remove the cooler or notice significantly higher temperatures over time, consider reapplying fresh thermal paste.

Laasigbotitusita

Ti o ba pade awọn iṣoro pẹlu ẹrọ itutu CPU rẹ, tọka si awọn igbesẹ laasigbotitusita ti o wọpọ wọnyi:

• Olufẹ Ko Yiyi:
  • Ensure the 4-pin PWM fan cable is securely connected to the CPU_FAN header on the motherboard.
  • Check BIOS/UEFI settings to ensure the CPU fan control is enabled and configured correctly.
• Awọn iwọn otutu Sipiyu ti o ga:
  • Verify that the cooler is properly seated on the CPU and that mounting screws are tightened evenly.
  • Confirm that thermal paste was applied correctly and is making good contact.
  • Clean any dust accumulation from the heatsink fins and fan.
  • Rii daju pe afẹfẹ to peye wa ninu apoti PC rẹ.
• Digital Display Not Working/Incorrect Readings:
  • Check if the USB 2.0 header cable for the display is securely connected to both the cooler and the motherboard.
  • Install or update the TRCC software from the Thermalright official webojula.
  • Ensure the TRCC software is running in the background.

Awọn pato

Alaye atilẹyin ọja

Thermalright products are manufactured to high-quality standards. For specific warranty terms and conditions, including duration and coverage, please refer to the official Thermalright webojula tabi kan si alagbata rẹ. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Atilẹyin

For technical support, driver downloads (such as the TRCC software), or additional product information, please visit the official Thermalright webojula. O tun le kan si aaye rira rẹ fun iranlọwọ.

Official Thermalright Webojula: www.thermalright.com