Àwọn Ìwé Ìtọ́sọ́nà àti Ìtọ́sọ́nà Olùlò Cell2

Model SAF206S Electronic Siren Installation and operation manual Notice to installer Before installation and use -- read all instructions and warnings. Deliver this manual to the end user of this…

B18-DC Dual Colour LED Beacon User Manual WIRING / OPERATION Permanent Mount: BLACK: To -Chassis Ground RED: To +VDC (fuse@5A) for Warning Mode in COLOUR1 YELLOW: To +VDC (fuse@5A) for…

Photon 8H Riser Block Olumulo Afọwọṣe Ikilọ Ikilọ Imọlẹ Afọwọṣe Afihan l yiiamp is a LED warning light for fixed or temperer/ application in road warning, informing or guiding. WIRING…

Cell2 SW833 8+2 Outputs Control Panel Warning & Precautions NOTICE TO INSTALLER Before installation and operation – read all instructions, warnings and precautions thoroughly and carefully. Deliver this manual to…

B19 LED Beacon User Manual WIRING / OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHOM: Apply +VDC continually for low power operation YELLOW: Flash patterns…

R65 MINI LIGHT HEAD User Manual Surface Mount Connect YELLOW wires of multiple light heads together for synchronization (All heads should be set at the same Flash Pattern) For Simultaneous…

LED BEACON User Manual OPERATION RED: To +VDC BLACK: To Chassis Ground (-) FLASH PATTERN SELECTION Open Twist the dome lens counter clockwise B, then lift the dome lens to…

cell2 Reactor LED Warning Modules WARNING LIGHTHEAD Wiring To+VDC for Warning Mode (fuse @ 1A):...............RED To Chassis Ground:.......................................BLACK For Synchronization and Flash Pattern:........YELLOW Connect YELLOW wires of all lightheads together…

Cell2 B19 - AC Mirror Mount WIRING/ OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHITE: Apply +VDC continually for low power operation…

Cell2 B19 Internal Magnetic Mount WIRING/ OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHITE: Apply +VDC continually for low power operation Note:…