Access Control Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Access Control products.

Tip: include the full model number printed on your Access Control label for the best match.

Access Control manuals

Àwọn ìfìwéránṣẹ́ tuntun, àwọn ìwé ìtọ́ni tó ṣe pàtàkì, àti àwọn ìwé ìtọ́ni tó so mọ́ àwọn olùtajà fún àmì ìdámọ̀ yìí tag.

kindoo KIN S-B01 Access Iṣakoso eni ká Afowoyi

Oṣu Kẹta Ọjọ 22, Ọdun 2025
kindoo KIN S-B01 Access Control Product Information Connection Instructions Connect the power supply positive wire to Power Input POS Pin Connect the power supply negative wire to Power Input NEG Pin Connect the Switch and 3V Supply Pins to a…

kindoo KINS-W01 Wiwọle Iṣakoso eni ká Afowoyi

Oṣu Kẹta Ọjọ 22, Ọdun 2025
kindoo KINS-W01 Access Control Connection Diagram US Patent: US10325430 Install and wire in accordance with national Electrical Code, ANSI/NFPA70. © 2025 KINDOO LLP. All rights reserved. Connection Instructions Connect Power Supply to The Two Power Input Pins. Connect ground wire…

ZKTeco U1000E Long Distance RFID Access Iṣakoso fifi sori Itọsọna

Oṣu Kẹta Ọjọ 7, Ọdun 2025
ZKTeco U1000E Long Distance RFID Access Iṣakoso fifi sori Itọsọna Loriview Iwaju View Igbohunsafẹfẹ Ṣiṣẹ: 902MHz 928MHz 865MHz 868MHz Ka Ibiti: U1000E/F (0-6 mita) U2000E/F (0-12 mita) Iwọn 250mm*250mm*70mm (U1000E, U1000F) 445mm445*70mm U2000F) Ti ita View and Interface Cables Cable Definition:…

VISIONIS VIS-AXESS-1D-DLX-PCB Itọsọna Olumulo Iṣakoso Wiwọle Iṣowo Iṣowo

Oṣu Kẹta Ọjọ 14, Ọdun 2025
Commercial Access Control VIS-AXESS-1D-DLX-PCBUser Guide VIS-AXESS-1D-DLX-PCB Commercial Access Control Device Parameter Working Current: Non-loaded <200mA Working Temperature: -20°C - 50°C (-4°F - 122°F) Working Humidity: 10° - 90° Power Consumption: <3W Size: 85x157x20mm (3.35x6.18x0.79in.) Communication Mode: TCP/IP Communication Rate: 10/100M…

obohands BC-2000 Access Iṣakoso olumulo Afowoyi

Oṣu Kẹta Ọjọ 12, Ọdun 2025
obohands BC-2000 Access Control Product Usage Instructions Attach the rear plate to a single or double gang electrical box or secure it to the wall firmly with at least three flat head screws. When wiring has been completed, attach the…