Ọrọ Iṣaaju
The HANMATEK TI120 is a versatile, rugged, and ergonomically designed infrared thermal imager engineered for professional maintenance and detection tasks. It features a UFPA detector for excellent infrared resolution and offers a variety of palette modes for diverse applications. This manual provides essential information for the safe and effective use of your thermal imager.
Package Awọn akoonu
Jọwọ ṣayẹwo awọn akoonu package nigbati o ba gba lati rii daju pe gbogbo awọn ohun kan wa:
- TI120 Thermal Imager
- Ọran gbigbe
- Okun Ọwọ
- Iru-C Okun USB
- 32GB Micro SD Kaadi
- Afowoyi Olumulo (iwe-ipamọ yii)
Ṣeto
1. Ngba agbara si Batiri naa
The TI120 is equipped with a 3.7V/5000mAh rechargeable Li-ion battery. For optimal performance, fully charge the device before first use. Connect the Type-C USB cable to the device and a suitable power adapter (not included). The battery indicator on the screen will show charging status. A full charge typically takes approximately 5 hours and provides continuous use for more than 6 hours.
2. Fi Micro SD Kaadi sii
The device comes with a 32GB Micro SD card for storing thermal images. Locate the SD card slot, typically on the side of the device, and insert the card until it clicks into place. Ensure the device is powered off before inserting or removing the SD card.
Awọn ilana Iṣiṣẹ
1. Ẹrọ Loriview ati Awọn iṣakoso
Familiarize yourself with the buttons and display:
- Bọtini agbara: Tẹ mọlẹ lati tan/pa ẹrọ naa.
- Ṣeto Bọtini: Wọle si awọn aṣayan akojọ aṣayan ki o jẹrisi awọn aṣayan.
- Awọn bọtini lilọ kiri (Soke, Isalẹ, Osi, ọtun): Navigate through menus and adjust settings.
- Picture Browsing Button: View ti o ti fipamọ images.
- Bọtini Pada: Pada si iboju ti tẹlẹ tabi jade kuro ninu akojọ aṣayan kan.
- Bọtini kamẹra: Capture thermal images.
- Bọtini itanna: Activate the built-in LED light.
2. Image Mode Selection (Fusion Modes)
The TI120 offers five image fusion modes to combine thermal and visible light images for enhanced detail. Use the left and right navigation buttons under the live image screen to adjust the degree of fusion:
- 0% (Pure visible light image)
- 25%
- 50%
- 75%
- 100% (Pure thermal image)
3. Awọn paleti awọ
Choose from 5 color palettes to visualize temperature differences effectively:
- Rainbow
- Iron oxide red
- Awọ tutu
- Ooru funfun
- Ooru dudu
4. Temperature Measurement Methods
The TI120 supports multiple temperature measurement methods:
- Focused Area (ROI) Temperature Measurement: Measure temperature within a selected region of interest.
- Center Point Temperature Measurement: Provides accurate temperature readings at the center of the screen.
- Automatic Tracking of High and Low Temperatures: The device automatically identifies and displays the highest and lowest temperature points, helping to confirm anomalies quickly.
5. High and Low Temperature Alarm
The device features a high and low temperature alarm with LED lights flashing to alert the user when temperatures exceed or fall below set thresholds. This is particularly useful for continuous monitoring.
6. Data Communication and PC Software
The TI120 supports connection to a PC via its Type-C USB port for data transfer and analysis. The PC software offers two modes:
- Ipo Wakọ USB: Browse images, analyze image data, and generate/export PDF reports.
- USB Camera Mode: Take pictures, project images, and automatically save pictures for over-temperature events.
7. Awọn ohun elo
The HANMATEK TI120 is suitable for a wide range of applications, including:
- Iyẹwo ẹrọ
- Electrical fault detection (e.g., distribution boxes, motors)
- HVAC system inspection (e.g., pipe leaks)
- DIY repair detection
- Energy auditing
- Itọju ohun elo
- Auto repair
- Floor heating detection
- Wiwa ṣiṣan paipu omi
Itoju
- Ninu: Use a soft, dry cloth to clean the device body. For the lens, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- Ibi ipamọ: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
- Itọju Batiri: Lati pẹ aye batiri, yago fun gbigba agbara si batiri ni kikun nigbagbogbo. Gba agbara si ẹrọ nigbagbogbo, paapaa ti ko ba wa ni lilo fun awọn akoko ti o gbooro sii.
- Idaabobo Ayika: The TI120 has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for submersion.
Laasigbotitusita
- Ẹrọ ko ṣiṣẹ lori: Rii daju pe batiri ti gba agbara. Sopọ si orisun agbara ati gbiyanju lẹẹkansi.
- Image unclear/blurry: Check if the lens is clean. Adjust the focus if available (this model has fixed focus). Ensure proper distance to the object.
- Awọn kika iwọn otutu dabi pe ko pe: Verify the emissivity setting is correct for the material being measured. Ensure there are no strong heat sources interfering with the measurement area.
- Ko le gbe lọ files si PC: Ensure the USB cable is properly connected and the device is in USB Drive mode. Check PC software installation.
Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Infrared Spectral Bandwidth | 8 ~ 14μm |
| Piksẹli Aworan Gbona | 10800 (120*90) |
| Thermal Imaging Sensitivity | ≤60mK |
| Aaye Ti View Angle (FOV) | Ọdun 50(H)*38(V) |
| Iwọn fireemu | ≤25Hz |
| Iwọn otutu | -20°C ~ 400°C (-4°F ~ 752°F) |
| Yiye | ±2°C or 2% (take the maximum value, at room temperature 25°C) |
| Ipin ipinnu | 0.1°C |
| Temperature Measurement Response Time | ≤500ms |
| Ifihan Iru | 2.8" TFT LCD |
| Ipinnu Ifihan | 320*240 |
| Aworan kika | BMP |
| Visible Light lẹnsi | Bẹẹni |
| Ipinnu Imọlẹ ti o han | 640*480 |
| Visible Light Field Of View Angle (FOV) | 8 iwọn |
| Data Ibaraẹnisọrọ | Iru-C USB |
| Batiri | Li-dẹlẹ 3.7V / 5000mAh |
| Akoko Iṣẹ | Ko kere ju wakati 6 lọ |
| Akoko gbigba agbara | ≤ 5 wakati |
| Ngba agbara Voltage / lọwọlọwọ | 5V/2A |
| Ibi ipamọ otutu | -20°C ~ 60°C (-4°F ~ 140°F) |
| Awọn iwọn otutu ṣiṣẹ | 0 ~ 50°C (32°F ~ 140°F) |
| Ọriniinitutu ṣiṣẹ | ≤90%RH (tí kì í mú kí omi rọ̀) |
| Wiwọn Ijinna | 0.2m-5m (best 1m) |
| Awọn ede | Chinese, English, Russian, Spanish, French, Italian, Japanese, German |
| Se Smart Device | Bẹẹni |
| Ijẹrisi | CE |
Awọn imọran Olumulo
- Hydraulic Pipe Detection: The TI120 can effectively detect hydraulic pipe passages by identifying temperature differences caused by fluid flow or leaks. Look for distinct thermal patterns along the pipe's path.
- Residential Electrician Use: This device is suitable for residential electricians to detect overheating components in distribution boxes, wiring, and appliances, helping to prevent electrical fires and failures.
- Optimal Measurement Distance: For the most accurate readings, maintain a measurement distance between 0.2m and 5m, with 1m being ideal.
- Atunse Emissivity: For precise temperature measurements, especially on different materials, ensure the emissivity setting is correctly adjusted in the device's menu.
Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the warranty card included in your package or contact HANMATEK Official Store directly. Keep your purchase receipt as proof of purchase.
