SINOTIMER TM822 2-Channel Digital Programmable Timer Switch

1. Ifihan

The SINOTIMER TM822 is a versatile 2-channel digital programmable timer switch designed for automatic control of various electrical equipment. It allows you to set precise ON/OFF times over a 7-day period, with programming intervals as short as 1 second and a range up to 168 hours. This timer is ideal for applications such as streetlights, neon signs, lamps, water heaters, air conditioners, billboards, and agricultural facilities.

The device features low power consumption, a high-accuracy CMOS chip, strong anti-jamming capabilities, and is simple to set up and operate. It complies with IEC 60367 and holds CE, RoHS, EMC, LVD, and UKCA certifications.

2. Key Awọn ẹya ara ẹrọ

• Dual Channel Control: Two independent relay outputs for controlling two separate circuits.
• Eto Osẹ-ọsẹ: Set up to 8 ON/OFF programs per day, repeatable weekly.
• Àkókò gbòòrò: Programming intervals from 1 second to 168 hours.
• Batiri Afẹyinti: Built-in 3V CR2026 battery for retaining settings during power outages.
• Yiye giga: Equipped with a high-accuracy CMOS chip.
• Awọn iwe-ẹri: CE, RoHS, EMC, LVD, UKCA compliant.
• Awọn aṣayan iṣagbesori: Designed for panel mounting or screw installation.

3. Awọn pato

4. Package Awọn akoonu

Nígbà tí o bá ṣí àpò rẹ, jọ̀wọ́ rí i dájú pé gbogbo àwọn ohun náà wà níbẹ̀ tí wọn kò sì bàjẹ́:

• 1 x Timer Switch (TM822)
• 1 x Atọka iṣagbesori
• 1 x Ilana itọnisọna
• 2 x Skru
• 8 x Wires

5. fifi sori

IKILO: Installation should only be performed by a qualified electrician. Ensure power is disconnected before installation to prevent electric shock.

5.1 Iṣagbesori

The TM822 timer switch can be installed either panel-mounted or using screws. The provided bracket facilitates panel mounting.

5.2 Wiring aworan atọka

Connect the timer according to the appropriate wiring diagram for your model (AC or DC voltage). The TM822 features two independent relay outputs (CH1 and CH2).

6. Eto ibẹrẹ ati Eto

Before programming, ensure the timer is powered on. The display will show the current time and day.

6.1 Unlocking the Timer

To prevent accidental changes, the timer may be locked. To unlock:

1. Tẹ mọlẹ Akojọ bọtini fun isunmọ 3 aaya.
2. The 'LOCK ON' indicator on the display will disappear, indicating the timer is unlocked.

6.2 Ṣíṣeto Àkókò àti Ọjọ́ Lọ́wọ́lọ́wọ́

Láti ṣètò àkókò àti ọjọ́ lọ́wọ́lọ́wọ́:

1. Ensure the timer is unlocked.
2. Tẹ awọn OK button. The hour display will start flashing.
3. Lo awọn ▲ (Soke) ati ▼ Awọn bọtini (isalẹ) lati ṣatunṣe wakati naa.
4. Tẹ OK lẹẹkansi lati jẹrisi wakati naa ki o si gbe si awọn iṣẹju.
5. Lo awọn ▲ ati ▼ awọn bọtini lati ṣatunṣe awọn iṣẹju.
6. Tẹ OK again to confirm the minutes and move to the day of the week.
7. Lo awọn ▲ ati ▼ buttons to select the current day (e.g., Su for Sunday, Mo for Monday).
8. Tẹ OK to save the current time and day settings.

6.3 Ṣíṣeto Àwọn Ìrìn Àkókò TÍTÓNÍ/TÓPÁ

The TM822 allows for 8 ON/OFF programs per day. Each program can be set for a specific time and day(s) of the week.

1. Tẹ awọn Akojọ bọ́tìnì láti wọ inú ipò ètò. Ìfihàn náà yóò fi '1 ON' hàn.
2. Lo awọn ▲ ati ▼ buttons to set the desired ON time (hour and minute) for the first program.
3. Tẹ OK to confirm the ON time.
4. The display will now show '1 OFF'. Use the ▲ ati ▼ buttons to set the desired OFF time (hour and minute) for the first program.
5. Tẹ OK to confirm the OFF time.
6. The display will then show the day selection. Use the ▲ ati ▼ buttons to select the day(s) for this program (e.g., individual days, weekdays, weekends, all days).
7. Tẹ OK to save the first program.
8. Repeat steps 1-7 for additional programs (up to 8 ON/OFF pairs).
9. Lati jade kuro ni ipo siseto, tẹ bọtini naa Akojọ button repeatedly until the current time is displayed, or wait for a few seconds for it to automatically return.

7. Isẹ

7.1 Switching Modes (ON/ON AUTO/OFF/AUTO OFF)

The timer has different operating modes for manual override or automatic control:

1. Ensure the timer is unlocked.
2. Tẹ awọn Akojọ bọtini ati awọn ▲ (Up) button simultaneously to cycle through the modes:
   • LATI: Ìjáde náà ń ṣiṣẹ́ lórí ON nígbà gbogbo, ó sì ń borí àwọn àkókò PÁP tí a ti ṣètò.
   • LORI LATIO: The output is currently ON, but will follow the next programmed OFF time.
   • PA: Ìjáde náà máa ń pa nígbà gbogbo, ó sì máa ń borí àwọn àkókò ON tí a ti ṣètò.
   • PAA LATIO: The output is currently OFF, but will follow the next programmed ON time.
3. Select the desired mode based on your operational needs.

7.2 Selecting Channels (F1 or F2)

The TM822 has two independent channels. To select which channel you are programming or viewing:

1. Tẹ awọn Res bọtini.
2. The display will show 'F1' or 'F2', indicating the currently selected channel.
3. Toggle between F1 and F2 by pressing the Res bọtini.

8. Itọju

• Jẹ́ kí aago náà mọ́ tónítóní kí ó má ​​sì sí eruku. Lo aṣọ rírọ̀ tí ó gbẹ fún fífọ nǹkan mọ́.
• Yago fun ṣiṣafihan ẹrọ naa si awọn iwọn otutu to gaju, ọriniinitutu, tabi oorun taara.
• Ma ṣe lo abrasive ose tabi epo.
• The internal 3V CR2026 backup battery is not user-replaceable and is designed for long-term use. If the timer loses settings frequently during power outages, the battery may need professional servicing.

9. Laasigbotitusita

10. Awọn imọran olumulo

• Batiri Afẹyinti: The timer includes a 3V CR2026 backup battery to maintain settings during power outages. This battery is not rechargeable by the user and is intended for long-term retention of settings.
• Awọn ikanni olominira: The two relay outputs (CH1 and CH2) operate independently. This means you can program different schedules for each channel to control separate devices or circuits.

11. Atilẹyin ọja ati Support

Fun alaye atilẹyin ọja, jọwọ tọka si awọn ofin ati ipo ti oniṣowo rẹ tabi oṣiṣẹ olupese pese. website. For technical support or service inquiries, please contact the SINOTIMER Official Store or your point of purchase.