Ìwé Ìtọ́sọ́nà Olùlò PROZOR HDMI Switch 3 In 2 Out

Ọja Pariview

The PROZOR HDMI Switch 3 In 2 Out is designed to connect up to three HDMI source devices to two HDMI displays simultaneously. It duplicates the signal, sending the same high-definition content to both displays. This device supports Ultra HD 4K/2K resolutions and all 3D resolutions, making it suitable for various home entertainment and professional setups.

Figure 1: PROZOR HDMI Switch 3 In 2 Out with included remote control.

Package Awọn akoonu

Jọwọ ṣayẹwo awọn akoonu package lori ṣiṣi silẹ lati rii daju pe gbogbo awọn nkan wa:

• 1 x PROZOR HDMI Switcher (3 In 2 Out)
• 1 x IR Remote Control (Note: Battery not included)
• 1 x USB Agbara Agbara
• 1 x Itọsọna olumulo
• 1 x 1m HDMI Okun

Ṣe nọmba 2: Gbogbo awọn nkan ti o wa ninu package ọja.

Ifilelẹ ẹrọ

Familiarize yourself with the ports and controls on the HDMI Switcher:

Figure 3: Front and rear panel layout with labeled ports and indicators.

• Àwọn Ibudo Ìwọlé (IN 1, IN 2, IN 3): Connect your HDMI source devices (e.g., PC, DVD player, game console).
• Output Ports (OUT 1, OUT 2): Connect to your HDMI displays (e.g., HDTVs, monitors).
• Power Port (DC 5V/1A): Connect the provided USB power cable.
• Olugba IR: For receiving signals from the infrared remote control.
• Input Indicators (1, 2, 3): LEDs that light up to show the currently selected input.
• Output Indicators (1, 2): LEDs that light up to show active output displays.
• Yan Bọtini: Manually switch between input sources.

Awọn ilana iṣeto

Follow these steps to connect your PROZOR HDMI Switch:

1. So awọn ẹrọ ti nwọle pọ: Use HDMI cables to connect your source devices (such as a PC, Blue-Ray DVD player, PS3, or PS4) to the HDMI IN 1, IN 2, and IN 3 ports on the switcher.
2. Connect Output Displays: Use HDMI cables to connect your two HD TVs or monitors to the HDMI OUT 1 and OUT 2 ports on the switcher.
3. Pese agbara: Connect the provided USB power cable to the Power port on the switcher and then to a suitable USB power source (e.g., a USB wall adapter, TV USB port, or computer USB port). Ensure the power supply is DC 5V/1A.
4. Agbara Tan: Power on all connected source devices and displays.

Figure 4: Typical connection diagram for the HDMI Switch.

Awọn ilana Iṣiṣẹ

The PROZOR HDMI Switch offers both automatic and manual switching options:

Aifọwọyi Yipada

The switch will automatically detect and switch to the active HDMI input source. If multiple sources are active, it may prioritize one or switch to the most recently activated one.

Afowoyi Yipada

You can manually select the desired input source using either the "Select" button on the device or the IR remote control.

• Using the Select Button: Press the "Select" button on the front panel of the HDMI Switcher to cycle through the input sources (IN 1, IN 2, IN 3). The corresponding input indicator LED will light up.
• Lilo Iṣakoso Latọna jijin IR:
  1. Ensure the insulating sheet is removed from the remote control's battery compartment before first use.
  2. Point the remote control towards the IR receiver on the HDMI Switcher.
  3. Press the corresponding number button (1, 2, or 3) on the remote to select the desired HDMI input. The remote control works effectively within a 5-meter range.

Figure 5: Operating the HDMI Switch with the IR remote control.

Video 1: Demonstration of the PROZOR HDMI Switch setup and operation, including remote and manual switching.

Itoju

To ensure the longevity and optimal performance of your HDMI Switcher, please follow these maintenance guidelines:

• Pa ẹrọ naa mọ si ibi ti o tutu ati gbigbẹ, kuro ni oorun taara, awọn orisun ooru, ati ọrinrin.
• Nu ẹrọ naa pẹlu asọ ti o tutu, ti o gbẹ. Ma ṣe lo olomi tabi awọn olutọpa aerosol.
• Yago fun sisọ silẹ tabi tẹriba ẹrọ si awọn ipa to lagbara.
• Má ṣe gbìyànjú láti ṣí tàbí ṣe àtúnṣe ẹ̀rọ náà, nítorí èyí yóò sọ àtìlẹ́yìn náà di òfo.

Troubleshooting and Important Notes

If you encounter issues, please review awọn ojuami wọnyi:

• No Signal/Display Issues:
  • Ensure all HDMI cables are securely connected to both the source devices, the switcher, and the displays.
  • Verify that the USB power cable is properly connected and providing power (DC 5V/1A).
  • Try switching inputs manually using the "Select" button on the device.
  • Test with different HDMI cables if possible, as faulty cables can cause signal loss.
• Resolution/Compatibility Limitations:
  • Ẹrọ yii does not support HDR, HDCP 2.2, or HDMI 2.0.
  • It does not support 4K/60Hz. The maximum supported resolution is 3840*2160@30Hz.
  • It does not support 7.1ch audio.
  • If your source device is HDMI 2.0 and HDCP 2.2, you must set its output resolution to 4K@30Hz to ensure compatibility with this switch.
• Akoonu 3D: Si view 3D content, all devices connected to the switch's outputs (displays) must support 3D.
• IR Isakoṣo latọna jijin:
  • Remember to remove the insulating sheet from the remote's battery compartment before first use.
  • Ensure you are within 5 meters of the switcher and have a clear line of sight to the IR receiver.

Awọn pato

Awọn imọran Olumulo

Here are some helpful tips for using your PROZOR HDMI Switch:

• For optimal performance, especially with 4K content, use high-quality HDMI cables.
• If you experience flickering or signal drops, ensure the USB power cable is connected and providing sufficient power. Some devices might require more stable power than a TV's USB port can provide.
• When switching inputs, allow a few seconds for the signal to stabilize on your displays.
• Keep the remote control's IR receiver clear of obstructions for reliable operation.

Atilẹyin ọja ati Support

The PROZOR HDMI Switch comes with an 18-month warranty. For any technical assistance or support inquiries, please contact our customer service. We are committed to providing friendly and helpful support.