1. Ifihan
This manual provides instructions for the safe and efficient use of the N324 Dual Battery Charger. This charger is designed to charge batteries for various Trimble Total Stations, including the M3, DR2, DR3, DR5, Nivo 2M, and Nivo 2C models. Please read this manual thoroughly before operating the device.
2. Eto
- Yọ Ṣaja naa kuro: Carefully remove the N324 dual battery charger and its AC/DC adapter from the packaging.
- Ṣayẹwo fun ibajẹ: Check the charger and adapter for any visible signs of damage. Do not use if damaged.
- Connect the AC/DC Adapter: Plug the DC output connector of the AC/DC adapter into the input port on the N324 charger.
- Sopọ si Agbara: Plug the AC input of the adapter into a standard wall outlet (100-240V ~ 50/60Hz).
3. Awọn ilana Iṣiṣẹ
The N324 charger features two charging bays, allowing for simultaneous charging of two compatible batteries.
- Fi awọn batiri sii: Align the battery with the charging bay and gently slide it into place until it clicks securely. Ensure proper orientation.
- Bojuto Ipo Gbigba agbara: The charger will typically have indicator lights (not explicitly detailed in provided info, but common for chargers) to show charging status (e.g., red for charging, green for fully charged).
- Yọ awọn batiri kuro: Once charging is complete, carefully remove the batteries from the charging bays.
4. Itọju
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu charger náà. Má ṣe lo àwọn ohun ìfọmọ́ omi tàbí àwọn ohun èlò ìfọ́mọ́.
- Ibi ipamọ: Tọju ṣaja ni itura, ibi gbigbẹ nigbati ko si ni lilo.
- Yago fun Lilọ: Do not pull on the power cord to disconnect the charger. Always grasp the plug firmly.
5. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ṣaja ko ṣiṣẹ lori | No power from outlet; adapter not connected properly; faulty adapter/charger | Check wall outlet with another device; ensure adapter is securely connected; contact support if issue persists. |
| Batiri ko ngba agbara | Battery not inserted correctly; incompatible battery; faulty battery | Re-insert battery, ensuring proper contact; verify battery compatibility; try another battery if available. |
6. Awọn pato
N324 Dual Battery Charger
- Awoṣe: N324
- Iṣawọle: DC 9V, 4.0A
- Abajade: DC 4.2V, 2A per port
- Ibamu: Trimble M3, DR2, DR3, DR5, Nivo 2M, Nivo 2C Total Stations (specifically batteries P/N: 67201-01-SPN / 8900084XXQ)
- Ipilẹṣẹ: Ṣe lati orilẹ-ede Ṣaina
- Nọmba apakan: 67201-01-SPN
- Nomba siriali: EGL-22039
AC / DC Adapter
- Awoṣe: 24-0503000-H
- Iṣawọle: 100-240V ~ 50/60Hz 1.0A
- Abajade: 5.0V === 3.0A
- Ipilẹṣẹ: Ṣe lati orilẹ-ede Ṣaina
Safety Information (from product label)
IKIRA: Risk of fire, explosion or burns. Do not disassemble. Do not crush or modify. Do not heat above 60°C (140°F). Do not short circuit. Do not dispose of in fire or water. Use only rechargeable Lithium-ion batteries. Refer to the battery manufacturer's instructions for proper use.
7. Awọn imọran olumulo
- Always ensure the charger is placed on a stable, flat surface during operation to prevent accidental disconnections or damage.
- For optimal battery life, avoid completely draining batteries before recharging them.
- If charging only one battery, either bay can be used.
8. Atilẹyin ọja ati Support
For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
