Anern Hybrid Solar Inverter Instruction Manual

1. Ifihan ati Loriview

This manual provides detailed instructions for the installation, operation, and maintenance of your Anern Hybrid Solar Inverter. The Anern Hybrid Solar Inverter is a pure sine wave inverter designed for off-grid solar systems, capable of running with or without a battery (note: low power inverters of 3.2KW and below require battery connection for use). It features a built-in MPPT solar charge controller and offers multiple charging and output modes to suit various application requirements.

The AN-SCI-MAX series includes models up to 10.2KW, while the AN-SCI-ECO series covers models up to 6.2KW. Both series are designed for efficiency and reliability in managing solar power.

2. Alaye Aabo

WARNING: This is an off-grid inverter. Please read all safety instructions carefully before installation and operation.

• Low power inverters (3.2KW and below) must be connected to batteries for proper operation.
• The starting power of inductive loads should be at least three times the inverter's rated power to prevent damage.
• Ensure all circuits are connected correctly and install appropriate circuit breakers for each circuit.
• Always follow the correct power-on and power-off sequence.

Power On Order:

1. First, turn on the battery.
2. Bẹrẹ ẹrọ oluyipada.
3. Then, turn on the circuit breakers for photovoltaic (PV), mains, and load.

Power Off Order (Reverse of Power On):

1. First, turn off the circuit breakers for load, mains, and photovoltaic (PV).
2. Pa ẹrọ oluyipada.
3. Finally, turn off the battery.

3. Awọn ẹya Ọja

The Anern Hybrid Solar Inverter offers a range of advanced features for efficient solar power management:

• Ijade Sine Wave Pure: Provides high-quality and stable AC current, compatible with most loads, protecting electrical devices and extending their service life.
• Iṣẹ Batiri ọfẹ: Capable of running without a battery (for models above 3.2KW). For battery-free operation, the solar module voltage must exceed 360V DC.
• One-Key Factory Reset: Convenient function for restoring default settings.
• PV Automatic Lithium Battery Activation: Solar input can automatically activate lithium batteries.
• Integrated MPPT Solar Controller:
• 160A MPPT solar controller for 10.2KW models.
• 120A MPPT solar controller for AN-SCI-ECO series.
• High Solar Input Power: Max 7500W (for 4.2KW) & 10800W (for 6.2KW) solar charge.
• Ìwọ̀n Ìṣíwọlé PV Gígatage Ibiti: 90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO.
• Anti-Dust Kit: Built-in for enhanced durability in harsh environments.
• Smart Battery Charge Design: Optimizes battery lifespan.
• Dual PV Input & AC Output (10.2KW models):
• Two independent MPPTs for convenient solar panel wiring and reduced need for sink boxes.
• Dual AC output with primary and secondary circuits. If PV and mains are absent and battery voltage is low, the primary circuit shuts down, and only the secondary output is maintained (Super Power Saving mode).
• WIFI Monitoring: Available for iOS and Android systems, allowing remote system control and monitoring.
• Awọn iru Batiri ibaramu: Supports Lead-acid, Lithium iron phosphate (LiFePO4), Gel, AGM, FLD, SLD, and user-defined battery types.
• Touch Button & LED Display: User-friendly interface for monitoring and control.

4. Package Awọn akoonu

Lẹhin ṣiṣi silẹ, jọwọ rii daju pe gbogbo awọn nkan wa ati pe ko bajẹ:

• Anern Hybrid Solar Inverter Unit
• Afowoyi Olumulo (iwe-ipamọ yii)
• Okùn ìbánisọ̀rọ̀ (tí ó bá wúlò)
• Ohun elo iṣagbesori (ti o ba wulo)
• PV Cover (if applicable)

5. Eto ati fifi sori

Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the system diagram and port overview fun awọn isopọ.

5.1 aworan atọka

The inverter connects to solar panels, an optional generator, utility grid, external battery packs, and powers home appliances. Ensure all connections are secure and correctly polarized.

5.2 Ọja Loriview and Port Identification

Key components and ports:

1. LCD àpapọ
2. Atọka ipo
3. Atọka gbigba agbara
4. Atọka aṣiṣe
5. Fọwọkan Awọn bọtini iṣẹ
6. Agbara titan/pa a yipada
7. AC igbewọle
8. Ijade akọkọ
9. Ijade keji
10. PV1 ati PV2 igbewọle
11. RS-232 / WIFI / Yọ LCD ibaraẹnisọrọ ibudo
12. Iṣagbewọle batiri
13. Anti ekuru kit

5.3 Àwọn Ìtọ́sọ́nà Ìsopọ̀

• Iṣawọle PV: Connect solar panels to PV1 and PV2 inputs (10). Ensure PV input voltage is within the specified range (90-450VDC for AN-SCI-MAX, 60-450VDC for AN-SCI-ECO).
• Asopọ batiri: Connect battery bank to Battery input (12). Observe correct polarity (+/-). Remember, low power inverters (3.2KW and below) require battery connection.
• Iṣawọle AC: Connect utility grid to AC input (7).
• Ijade AC: Connect main loads to Main output (8) and secondary loads to Second output (9).
• Ibaraẹnisọrọ: Use the RS-232/WIFI/Remove LCD communication port (11) for monitoring and control via WIFI.

Refer to the Safety Information section for the correct power-on and power-off sequence.

6. Awọn ilana Iṣiṣẹ

The inverter features an intuitive LCD display and touch buttons for easy operation and monitoring.

6.1 Ifihan ati Awọn iṣakoso

Ifihan LCD (1) fihan ipo eto akoko gidi, pẹlu iwọn didun titẹ sii/o wujadetage, current, power, and battery status. Use the touch function buttons (5) to navigate menus, adjust settings, and view o yatọ si sile.

6.2 Awọn ọna Ipese Agbara

The inverter supports three priority power supply modes:

1. Àkọ́kọ́ Ohun Èlò: The inverter primarily uses utility power, with solar and battery as backup.
2. Solar Panel Priority: The inverter prioritizes solar power, using utility or battery as backup when solar is insufficient.
3. Battery Priority: The inverter prioritizes battery power, using solar or utility as backup.

6.3 WIFI Monitoring

Utilize the built-in WIFI module to monitor and control your inverter system via a mobile application (available for iOS and Android). This allows for remote access to system data and settings.

7. Itọju

Regular maintenance ensures the longevity and optimal performance of your Anern Hybrid Solar Inverter.

• Ninu: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup. The built-in anti-dust kit helps, but regular cleaning is still recommended.
• Awọn isopọ: Regularly check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
• Ilera Batiri: Bojuto batiri voltage and charge cycles. The smart battery charge design helps optimize battery lifespan, but proper battery care is essential.
• Awọn imudojuiwọn famuwia: Ṣayẹwo awọn olupese ká webojú òpó tàbí àpù fún àwọn àtúnṣe firmware tó wà láti rí i dájú pé inverter rẹ ní àwọn ẹ̀yà tuntun àti àtúnṣe àṣìṣe.
• Awọn ipo Ayika: Ensure the inverter is installed in a well-ventilated area, free from excessive heat, moisture, and direct sunlight.

8. Laasigbotitusita

Tí o bá ní ìṣòro pẹ̀lú inverter rẹ, wo àwọn ìgbésẹ̀ ìṣàyẹ̀wò ìpìlẹ̀ wọ̀nyí. Fún àwọn ìṣòro tó le koko jù, kan si ìrànlọ́wọ́ oníbàárà.

• Ko si Agbara/Ifihan Pipa:
• Check the power on/off switch (6).
• Ṣe ayẹwo awọn asopọ batiri ati iwọn diduntage.
• Ensure AC input is present if operating in utility-dependent modes.
• Ko si Agbara Ijade:
• Check circuit breakers for PV, mains, and load.
• Verify load connections.
• Check for fault indicators (4) on the display.
• Awọn ọran gbigba agbara:
• Ensure solar panels are connected correctly and receiving sufficient sunlight.
• Ṣayẹwo PV igbewọle voltage ibiti.
• Verify battery type settings are correct for your connected battery.
• Àpọ̀jù/Gbóògì jù:
• Din awọn ti sopọ fifuye.
• Rii daju pe afẹfẹ to peye ni ayika inverter naa.
• Check for blockages in the anti-dust kit (13) or vents.
• Communication Issues (WIFI):
• Ensure the WIFI module is properly connected.
• Ṣayẹwo asopọ nẹtiwọki rẹ.
• Restart the inverter and your mobile device.

Always refer to the LCD display for specific error codes or warnings, which can help diagnose the problem.

9. Awọn pato

Below are the general specifications for the Anern AN-SCI-MAX-10200 model. Specifications may vary slightly between different models (e.g., 6.2KW, 4.2KW, 3.2KW, 2KW) and configurations (with/without WIFI).

10. Atilẹyin ọja ati Support

Anern is committed to providing high-quality products and customer satisfaction. Your inverter comes with certain guarantees and support services:

• Awọn ipadabọ Ọfẹ: Enjoy free returns within 15 days of delivery.
• Ẹri Ifijiṣẹ Yara: Ti ifijiṣẹ ba wa ni idaduro, o le ni ẹtọ fun koodu kupọọnu $1.00 kan.
• Awọn agbapada fun Awọn ọran: Refunds are provided if the package is lost or items are damaged during transit.
• No Delivery Refund: A full refund is available if the item is not delivered within 20 days.

For technical support, warranty claims, or any other inquiries, please contact your seller or refer to the official Anern webojula fun alaye olubasọrọ.