XTOOL Anyscan A30D BT OBD2 Scanner Instruction Manual

1. Ifihan

The XTOOL Anyscan A30D V2.0 is a powerful Bluetooth-enabled OBD2 diagnostic scanner designed for comprehensive vehicle analysis. It inherits the robust features of previous A30 models and introduces new capabilities like CAN FD and FCA protocol support, along with a built-in battery voltage display and flashlight function. This tool provides lifetime free software updates, ensuring you always have access to the latest diagnostic developments and vehicle coverage.

Awọn ẹya pataki pẹlu:

• Awọn imudojuiwọn sọfitiwia Ọfẹ ni igbesi aye: No subscription fees for all functions.
• Awọn ayẹwo Eto ni kikun: Accesses all available system modules (Engine, ABS, SRS, Transmission, etc.).
• Bi-directional Control & Active Tests: Perform various active tests to check component integrity.
• 19+ Hot Service Resets: Solve common maintenance tasks.
• Full 10 Mode OBD2 Functions: Comprehensive engine diagnostics.
• CAN FD & FCA AutoAuth Support: Broader compatibility for newer vehicles.
• 8-in-1 Live Data Graphing: Detailed real-time data analysis.
• Batiri Voltage Display & Flashlight: Added convenience for users.
• Atilẹyin ọpọlọpọ ede: Àwọn èdè tó lé ní àádọ́rin ló wà.

2. Eto Itọsọna

Follow these steps to set up your XTOOL Anyscan A30D V2.0 scanner:

2.1. App Download ati fifi sori

• Fun awọn ẹrọ iOS: Download the "Anyscan" App from the Apple App Store.
• Fun awọn ẹrọ Android: Download the "Anyscan" App from Google Play or the official XTOOL website (Support -> Download APP -> Anyscan).

2.2. Iforukọ ati ibere ise

Locate the Serial Number (S/N) and activation code on the quality certificate included with your device. Open the Anyscan app and follow the prompts to register your account and activate the dongle.

2.3. Connecting to Your Vehicle

1. Plug the A30D V2.0 interface adapter into your vehicle's OBD2 Port. The device will light up (red light for power supply). The built-in flashlight can assist in locating the port in dark areas.
2. Tan iná ọkọ̀ rẹ.

2.4. Sisopọ Bluetooth

• Fun awọn ẹrọ iOS: Go to both the Anyscan app's Bluetooth settings and your device's system Bluetooth settings to pair with the A30D V2.0.
• Fun awọn ẹrọ Android: Only use the Bluetooth settings within the Anyscan app to pair with the A30D V2.0.

Once connected, the device's indicator lights will change (e.g., blue for Bluetooth, green for communication).

3. Awọn ilana Iṣiṣẹ

After successful setup and connection, you can begin diagnosing your vehicle using the Anyscan app.

3.1. Àyẹ̀wò Ẹ̀rọ Kíkún

The A30D V2.0 can access and diagnose all available electronic control units (ECUs) in your vehicle. This includes, but is not limited to, Engine, ABS, SRS (Airbag), Transmission, TPMS (Tire Pressure Monitoring System), SAS (Steering Angle Sensor), BMS (Battery Management System), EPB (Electronic Parking Brake), Chassis, and Air Conditioning systems.

• Check Engine System: Reads fault codes, identifies the cause of the check engine light, and displays live data streams.
• Ètò ABS: Retrieves DTCs, views live data, and offers you specific info of pending codes.
• SRS System: Reads SRS information to detect problems and ensure driving safety.
• Eto gbigbe: This car Bluetooth diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.

Within each system, you can typically perform the following actions:

• Read Trouble Codes: Displays detailed DTC information.
• Erase Trouble Codes: Clears DTCs and other data from the ECU, turning off warning lights.
• Alaye ECU: Provides detailed information about the ECU.
• Data Live: Retrieves and displays real-time data and parameters from the vehicle's ECU.

3.2. Bi-directional Control & Active Tests

This function allows you to send commands to vehicle systems and components to test their operational status directly from the scanner, without using the vehicle's controls. This significantly speeds up troubleshooting and helps identify malfunction causes efficiently.

ExampAwọn idanwo ti nṣiṣe lọwọ pẹlu:

• Turning on the radiator fan
• Modulating the throttle
• Ṣiṣii / pipade awọn window
• Operating mirrors
• Turning on/off lights or the sound horn
• Testing door locks
• EVAP system tests
• ABS auto-bleed
• Ìṣètò A/C
• Adaptive Headlamp Atunṣe
• Mirrors Folding/Unfolding
• Interior lights / Inside mirrors / Steering wheel heating

3.3. Special Functions (19+ Hot Service Resets)

The A30D V2.0 offers over 19 special reset and maintenance functions to address common vehicle service needs. These functions are continuously updated and expanded.

• Atunto epo: Resets service intervals after an oil change and turns off the oil light.
• EPB Tunto: Resets brake pads after replacement of the brake system.
• SAS Reset: Ṣe àtúnṣe ìṣàtúnṣe sensọ igun idari.
• BMS Tunto: Registers a new battery to the ECU after replacement.
• Ẹjẹ ABS: Cycles the ABS pump to bleed air out of the ABS module for firm brake pedals.
• Ifaminsi Abẹrẹ: Codes injectors after replacement.
• Tún kọ́ nípa throttle: Initializes throttle actuators to return "learned" values to the default state.
• Crank Sensor Relearn (Tooth Learning): Learns crankshaft tooth machining tolerance for accurate engine misfire diagnosis.
• DPF/GPF Reset Service: Regenerates Diesel/Gasoline Particulate Filters to clear PM and stabilize performance.
• Atunto TPMS: Relearns TPMS sensors so new sensors are recognized by the ECU.
• Gearbox Match (Transmission/Gearbox Matching): Resets adaptive shifting points in the automatic Transmission Control Unit.
• Airbag Repair: Resets Airbag data and clears collision data after replacement.
• Tire Upgrade (Tire Pressure Reset): Resets tire pressure and turns off the tire pressure MIL after tire-related changes.
• Iṣatunṣe ijoko: Baramu awọn ijoko pẹlu iṣẹ iranti lẹhin rirọpo tabi atunṣe.
• ECU Control Unit Reset: Restores ECU parameters to factory default settings.
• Ìbẹ̀rẹ̀ Fèrèsé: Ṣe ibamu ferese ẹnu-ọna lati gba iranti ibẹrẹ ECU pada ati iṣẹ igoke/sọkalẹ laifọwọyi.
• Ibẹrẹ Ilaorun: Similar to window initialization for sunroofs.
• GPF Reset: (Gasoline Particulate Filter) Similar to DPF reset.
• Camshaft Learning: Helps remove the engine or timing belt after replacing the ckp sensor or ECU.

3.4. Full 10 Mode OBD2 Functions

The A30D V2.0 provides comprehensive OBD2 functionality for all cars manufactured after 1996.

1. Ka Ìṣàn Dátà Lóòrèkóòrè: Reads and displays live ECU/PCM data stream, plotting functions graphically.
2. Read Freeze Frame Data: Records specific vehicle conditions when an emission-related fault occurs.
3. Read DTCs (Diagnostic Trouble Codes): Shows detailed descriptions of DTCs.
4. Ko awọn DTC kuro: Pa ina Ṣayẹwo ẹrọ (MIL), ko awọn koodu kuro, ati tun awọn diigi ṣe.
5. Oxygen Sensor Monitoring: Gba àtúnṣe àti viewlílo àwọn àbájáde ìdánwò olùtọ́jú sensọ̀ O2.
6. Abojuto eto: Checks whether various emissions-related systems are operating properly.
7. Read Pending DTCs: Displays diagnostic trouble codes that have not yet confirmed a malfunction.
8. Control Operation of On-Board System (Component Test): Actuates certain vehicle components by commands from the scanner to test their operability.
9. Ka Alaye Ọkọ: Ṣe afihan VIN (Nọmba Idanimọ Ọkọ), CID (ID isọdiwọn), ati CVN (Nọmba Imudaniloju Iṣatunṣe).
10. DTC Lookup Library: Provides direct definitions of OBD2 fault codes, including descriptions, causes, and maintenance suggestions.

3.5. Ṣíṣe àwòrán Dátà Láàyè

The A30D V2.0 allows you to read and display vehicle live data in an 8-in-1 graphical format. You can customize specific PIDs (Parameter IDs) and merge graphs for up to 8 data PIDs simultaneously, providing a comprehensive view of your car's health status and aiding in the analysis of abnormal parameters.

3.6. FCA AutoAuth & CAN FD Protocols

The A30D V2.0 supports FCA AutoAuth for main FCA vehicles (Fiat, Chrysler, Dodge, Jeep, etc.) manufactured after 2018. This allows the scanner to communicate with the FCA Authentication System, bypassing the need for a bypass cable for diagnostics and bi-directional controls. Note that a personal AutoAuth account and active subscription may be required for full access to FCA's Secure Gateway Module.

It also features built-in CAN FD protocol support, making it compatible with the latest GM vehicles manufactured after 2020. CAN FD offers advantages such as shorter latency, more accuracy, better real-time performance, and higher bandwidth for efficient information transmission.

3.7. Report Generation

The Anyscan A30D V2.0 automatically generates diagnostic reports after completing a car diagnostic session. These reports can be saved, shared via email, or printed as PDF files, providing a clear record of vehicle conditions and diagnostic findings.

4. Itọju

4.1. Software imudojuiwọn

The XTOOL Anyscan A30D V2.0 comes with lifetime free software updates. These updates are released frequently to improve capabilities, expand vehicle coverage, and optimize the app/software. To update, access the "Updates" menu in the Anyscan app and select "Update All" to download the latest software versions.

4.2. Gbogbogbo Itọju

• Jeki ẹrọ naa di mimọ ati ofe kuro ninu eruku ati ọrinrin.
• Tọju ẹrọ naa ni itura, aye gbigbẹ nigbati o ko ba wa ni lilo.
• Yago fun sisọ ẹrọ naa silẹ tabi fifisilẹ si awọn ipa to lagbara.
• Do not attempt to disassemble or repair the device yourself, as this may void the warranty.

5. Laasigbotitusita

Here are solutions for common issues you might encounter:

5.1. "VCI Connect Failed", "License Expired", or "Software Package Updated, but Update Interface Not Available"

These issues often indicate that the VCI (Vehicle Communication Interface) firmware version is too low. XTOOL technicians frequently optimize the firmware. If your firmware is not updated, it may cause communication problems.

Ojutu: Upgrade the firmware version according to the video operation in the setup section. If the issue persists, please contact XTOOL support for assistance.

5.2. Automatic Scan Unsuccessful

If the automatic VIN scan fails to identify your vehicle, you may need to manually enter the vehicle information. If manual entry also faces issues, please contact XTOOL support with your 17-digit VIN number for technical assistance.

5.3. Missing Activation Code

If your activation code is missing, please send your device's Serial Number (S/N) to XTOOL support (xtooldirect@outlook.com) to retrieve it.

5.4. Language Switching Issues

When switching the language in the app, the factory presets the language and model software in English. After changing the language, you will need to re-download the model software in the corresponding new language. If the software prompts that a language is not supported, contact XTOOL support for authorization.

6. Awọn pato

7. Awọn imọran olumulo

• Iyipada ede: Remember that after switching the app language, you need to re-download the specific vehicle model software in the newly selected language for it to function correctly.
• Ṣayẹwo ibamu: Vehicle compatibility for specific functions can vary. If you are unsure, it is recommended to provide your vehicle's VIN (Vehicle Identification Number) to XTOOL support (xtooldirect@outlook.com) to check compatibility before attempting advanced operations.
• FCA AutoAuth: While the A30D V2.0 supports FCA AutoAuth, full access to the Secure Gateway Module for 2018+ FCA vehicles may require a separate personal AutoAuth account and active subscription.
• Awọn imudojuiwọn sọfitiwia: Gba advantage of the lifetime free software updates to ensure your tool always has the latest vehicle coverage and diagnostic capabilities. Regularly check the "Updates" section in the app.

8. Atilẹyin ọja

The XTOOL Anyscan A30D V2.0 diagnostic tool comes with a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9. Atilẹyin

For technical assistance, compatibility inquiries, or any other support needs, please contact XTOOL's customer service:

• Imeeli: xtooldirect@outlook.com
• Awọn wakati iṣẹ: 24 hours after-sales service is available.

When contacting support, please provide your device's Serial Number (S/N) and the operating system of your smart device (iOS/Android) for faster service.