AUTOPHIX JSC 2100 Super Capacitor Car Jump Starter User Manual

1. Ifihan

Thank you for choosing the AUTOPHIX JSC 2100 Super Capacitor Jump Starter. This device is designed to provide a safe, portable, and reliable solution for starting 12V vehicles with a weak battery. Please read this user manual carefully before using the device to ensure proper operation and safety.

Awọn Ikilọ Abo

Failure to follow these safety warnings may result in property damage, electric shock, or serious injury.

• Do not let the battery clamps touch each other or other metals to avoid sparking.
• Do not disassemble the product and accessories. Incorrect assembly may cause sparks or electric shock.
• Do not use the device if it is already broken or damaged.
• Do not place the device near combustible materials such as carpets, cardboard, or paper.
• Ma ṣe fi ẹrọ naa han si ojo tabi egbon.
• Do not place the device on the car battery when starting the car.
• Please turn off all electrical appliances in the car before using the device, such as headlights and air conditioner.
• Ensure the car is fully stopped and the emergency brake is engaged before use.
• Make sure the vehicle's ignition key is turned off before using the device (or ensure the car is completely off when using a Smart Car Key Button).
• Please keep the device away from heat sources and avoid direct sunlight.
• Do not clean the device with corrosive liquids.
• Please charge the device fully before initial use.

2. Awọn ẹya ara ẹrọ ọja ati Advantages

The AUTOPHIX JSC 2100 stands out with its advanced supercapacitor technology, offering superior safety and convenience compared to traditional lithium-ion jump starters.

Supercapacitor Technology

Unlike lithium-ion jump starters that require regular pre-charging, the JSC 2100 utilizes supercapacitors. It absorbs a small amount of residual power from your weak car battery and rapidly amplifies it to generate the necessary power to start the engine within minutes. This means you don't need to remember to pre-charge the device at home.

Figure 1: Ultracapacitor advantages over traditional lithium charging equipment.

• Ko si Itọju: Safe and worry-free operation.
• Gbigba agbara yiyara: Quick start in emergencies.
• Super Capacity: Stable power storage.
• Physical Discharge: Ore ayika.
• Igbesi aye gigun: Up to 10 years, withstanding over 100,000 charge/discharge cycles.

-Itumọ ti ni Awọn aabo

Figure 2: Integrated protection features for safe operation.

• Idaabobo ti o pọju
• Idaabobo kukuru kukuru
• Lori idasile Idaabobo
• Idaabobo iwọn otutu
• Idaabobo asopọ idakeji

Extreme Weather Reliability

The JSC 2100 is designed to operate reliably in a wide range of temperatures, from extremely cold conditions (-25°C / -13°F) to high heat (70°C / 158°F). This makes it ideal for use in diverse climates and environments.

Figure 3: The JSC 2100 operates effectively in extreme temperatures.

Gbooro ti nše ọkọ ibamu

The JSC 2100 supports 12V batteries and can jump start gasoline engines up to 5.0 liters and diesel engines up to 5.0 liters. It is suitable for a variety of vehicles including motorcycles, SUVs, sedans, commercial vehicles, pickup trucks, and vans.

Figure 4: The JSC 2100 supports a wide range of 12V vehicles.

3. Package Awọn akoonu

Jọwọ ṣayẹwo apoti fun awọn nkan wọnyi:

• AUTOPHIX JSC 2100 Jump Starter (x1)
• Cigarette Lighter (x1)
• Alligator Clamps (x1 set)
• Okun Ngba agbara USB (x1)
• Itọsọna olumulo (x1)

Àwòrán 5: Àwọn ohun tó wà nínú àpò ọjà náà.

4. Ọja Ipariview

Familiarize yourself with the components of your AUTOPHIX JSC 2100 Jump Starter:

Figure 6: Labeled components of the JSC 2100 Jump Starter.

• Ifihan LCD: Shows battery input, charge status, and instructions.
• Bọtini Ibẹrẹ: Initiates the jump-starting process.
• EC8 Port: Connector for the alligator clip cable.
• Ibudo Gbigba agbara USB: For charging the device via a 5V Type-C USB cable.
• Ibudo Gbigba agbara DC: For charging the device via a 12V alligator clip cable or cigarette lighter adapter.
• Clamps: Red (+) and Black (-) alligator clips for connecting to the vehicle battery.

5. Eto ati gbigba agbara

The JSC 2100 does not require constant pre-charging like traditional lithium-ion jump starters. It charges itself from the vehicle's weak battery or other 12V/5V sources.

Awọn ọna gbigba agbara

The device can be charged using one of two methods:

1. From Vehicle Battery (12V): Connect the alligator clip cable to the EC8 port on the jump starter, then connect the clamps to your vehicle's battery terminals (red to positive, black to negative). The device will draw a small charge from the battery to power itself up for a jump start. This typically takes about 5 minutes.
2. From 5V USB Source: Use the provided Type-C USB cable to connect the jump starter to a 5V USB power source. This method is slower and typically takes about 30 minutes for a full charge.

Figure 7: Approximate charging times based on input voltage.

6. Àwọn Ìlànà Ìṣiṣẹ́: Fò Bẹ̀rẹ̀ Ọkọ̀ Rẹ

Follow these steps to safely jump start your 12V vehicle:

Àwòrán 8: Ìtọ́sọ́nà ìgbésẹ̀-lẹ́sẹẹsẹ fún fífò bọ́ọ̀lù.

1. Connect to Jump Starter: Fully insert the plug of the battery cable (alligator clips) into the EC8 port on the jump starter.
2. Connect to Vehicle Battery: Fully clamp the positive (+) pole of the car battery with the red alligator clip and the negative (-) pole of the car battery with the black clip. Ensure a secure connection.
3. Initiate Jump Start: Press the 'Start' button on the jump starter. The device's screen will display instructions. Turn off all electrical appliances in the car (e.g., headlights, radio) and then press the 'Next' button on the jump starter. After a few seconds, the screen will prompt you to "please start the ignition".
4. Ọkọ Bẹrẹ: At this time, turn the vehicle's ignition key to the START position (or press the Smart Car Key Button). The jump starter's screen will show "Starting" and then "Finish" once successful.
5. Ge asopọ: Disconnect the alligator clip cable and remove the alligator clips from the vehicle battery within 30 seconds after the vehicle has started.

Figure 9: Visual flowchart of the jump-starting process.

7. Itọju

The AUTOPHIX JSC 2100 Super Capacitor Jump Starter is designed for low maintenance due to its supercapacitor technology.

• Ninu: Use a soft, dry cloth to clean the device. Do not use corrosive liquids or abrasive cleaners.
• Ibi ipamọ: Store the device in a cool, dry place, away from direct sunlight and heat sources. Ensure the clamps are not touching each other or other metal objects during storage.
• Igbesi aye: With proper care, the supercapacitor technology provides a lifespan of up to 10 years and over 100,000 uses.

8. Laasigbotitusita

If you encounter issues with your JSC 2100, refer to the following common problems and solutions:

Ti awọn iṣoro ba wa, jọwọ kan si atilẹyin alabara.

9. Awọn pato

Technical parameters for the AUTOPHIX JSC 2100:

Nọmba 10: Awọn alaye ọja alaye.

10. Awọn imọran olumulo

Here are some general tips for optimal use of your jump starter:

• Keep it Accessible: Store the jump starter in an easily accessible location in your vehicle, especially during long trips or in cold weather.
• Awọn iṣayẹwo deede: Although it doesn't require constant charging, periodically check the device's condition and ensure cables are not damaged.
• Awọn ibudo mimọ: For best results, ensure your vehicle's battery terminals are clean and free of corrosion before connecting the clamps.
• Iwọn Ẹrọ: Be mindful of the specified engine displacement limits (5.0L Gas, 5.0L Diesel) to avoid overworking the device.

11. Atilẹyin ọja ati Support

For warranty information, technical support, or any questions not covered in this manual, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.