Ọrọ Iṣaaju
O ṣeun fun riraasing the Stitch Disney Digital Watch. This manual provides detailed instructions on how to set up, operate, and maintain your new watch. Please read it carefully to ensure proper use and longevity of your product.
Awọn pato
| Ẹya ara ẹrọ | Apejuwe |
|---|---|
| Orukọ Brand | Disney |
| Nọmba awoṣe | 4DDQ0418 |
| Gbigbe | Oni-nọmba |
| Ifihan Iru | Oni-nọmba |
| Ohun elo ọran | Ṣiṣu |
| Apẹrẹ Ọran | Onigun merin |
| Ọran Sisanra | 10mm |
| Iwọn Dial | 34mm |
| Titẹ Window Ohun elo Iru | Ṣiṣu |
| Band elo Iru | Silikoni |
| Band Gigun | 21cm |
| Iwọn Iwọn | 18mm |
| Kilasi Iru | Farasin Kilasi |
| Omi Resistance Ijinle | 3 Pẹpẹ |
| Awọn ẹya ara ẹrọ | Back Light, LED Display, Auto Date, Complete Calendar |
| Ara | Njagun & Àjọsọpọ |
| Ipilẹṣẹ | Orile-ede China |
Awọn ilana iṣeto
This section guides you through the initial setup of your digital watch, including activating the display and setting the time and date.
1. Activating the Display
The watch display is typically off to conserve battery. To activate it and view the time:
- Press the button on the right side of the watch once. The display will light up, showing the current time.
2. Eto Aago ati Ọjọ
To adjust the time and date:
- From the time display, press and hold the button for approximately 3 seconds until the hour digits begin to flash. This indicates you are in setting mode.
- Ṣeto Wakati: While the hour digits are flashing, short press the button repeatedly to advance the hour. The watch supports both 12-hour (with AM/PM indicator) and 24-hour formats.
- Ṣeto Iṣẹju: Once the hour is set, press and hold the button again for 3 seconds. The minute digits will begin to flash. Short press the button to adjust the minutes.
- Ṣètò Oṣù: Press and hold the button again. The month digits will flash. Short press to adjust the month.
- Ṣeto Ọjọ: Press and hold the button again. The day digits will flash. Short press to adjust the day.
- Jade Ipo Eto: After setting the day, press and hold the button one last time to exit the setting mode. The display will stop flashing, and your settings will be saved.
For a visual guide, please refer to the instructional video below:
Ṣiṣẹ awọn Watch
Your Stitch Disney Digital Watch is designed for simple and intuitive operation.
1. Awọn ọna ifihan
The watch features multiple display modes that can be cycled through with a single press of the button:
- Ifihan akoko: A short press of the button will show the current time (hours and minutes).
- Ifihan Ọjọ: Another short press will switch the display to show the current date (month and day).
- Awọn ẹya miiran: Depending on the model, additional short presses may cycle through other features like seconds or a simple animation.
2. Awọn ẹya ara ẹrọ Loriview
- Ifihan LED: Bright and clear digital display for easy readability.
- Imọlẹ afẹyinti: The display illuminates when activated, making it visible in low-light conditions.
- Ọjọ Aifọwọyi: The watch automatically adjusts for the correct date.
- Kalẹnda pipe: Displays both month and day.
Itoju ati Itọju
Proper care will help extend the life and appearance of your watch.
1. Omi Resistance
Your watch has a water resistance rating of 3 Bar (30 meters), which means it is suitable for daily use and can withstand splashes or brief immersion in water, such as hand washing.
Awọn akiyesi pataki:
- Avoid hot water and steam. Exposure to hot water or steam can damage the watch's seals and internal components.
- In some cases, water vapor may appear inside the watch due to temperature differences. This is normal. Placing the watch on a desiccant (e.g., silica gel packet) will help the vapor disappear.
- Do not press buttons while the watch is wet or submerged.
2. Ninu
- Nu apoti aago ati okun pẹlu asọ, damp asọ.
- Avoid using harsh chemicals or abrasive materials, as these can damage the plastic case and silicone band.
- Ensure the watch is completely dry before storing or wearing.
3. Batiri Rirọpo
This watch uses a non-rechargeable button-cell battery. When the display becomes dim or stops working, the battery will need to be replaced. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.
Laasigbotitusita
Eyi ni awọn ojutu si awọn ọran ti o wọpọ ti o le ba pade:
1. Watch Display Not Turning On
- Ṣayẹwo Batiri: The battery may be depleted. Refer to the 'Battery Replacement' section under Maintenance.
- Tẹ Bọtini: Ensure you are pressing the button firmly. A single short press should activate the display.
2. Incorrect Time or Date
- Reset Time/Date: Follow the 'Setting Time and Date' instructions in the Setup section to correct the time and date.
3. Water Vapor Inside Display
- Temperature Difference: This can occur due to sudden temperature changes. Place the watch with a desiccant (e.g., silica gel) in an airtight container for a few hours to absorb the moisture. If the issue persists, consult a professional.
Awọn imọran Olumulo
- Igbesi aye batiri: To maximize battery life, avoid unnecessary activation of the display. The display automatically turns off after a few seconds of inactivity.
- Ifihan omi: While the watch is water-resistant, it's best to remove it before showering, swimming, or engaging in water sports to prevent potential damage from prolonged exposure or high-pressure water.
- Akoko Eto: If you find setting the time challenging, watch the instructional video in the 'Setup Instructions' section for a clear demonstration.
Atilẹyin ọja
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Atilẹyin
If you have any questions or require further assistance with your Stitch Disney Digital Watch, please contact the seller or retailer from whom you purchased the product. They will be able to provide specific support and guidance.
