NaviFly F83 6.25-inch Motorcycle Carplay GPS Navigation Android Auto Dual Camera User Manual

1. Ọja Ipariview

The NaviFly F83 is a 6.25-inch motorcycle Carplay dash cam featuring two waterproof cameras for front and rear video recording. It supports wireless Carplay and Android Auto connections, allowing riders to connect their phones for GPS navigation, music playback, Bluetooth calls, and voice assistance. The device boasts an IP67 waterproof rating, ensuring durability and normal operation even in rainy conditions.

2. Ọja paati Akojọ

Package naa pẹlu awọn paati wọnyi:

3. Awọn alaye ọja

4. Memory Card Specifications Requirement

The quality of the memory card significantly impacts the stability of video recording. For optimal performance and safe video recording, please use memory cards from reputable brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification should be at least Class 10, and the card must support up to 256GB capacity.

5. Memory Card Installation Instructions

Lati fi kaadi iranti sori ẹrọ:

1. First, remove the TF card cover.
2. Insert the memory card into the device, ensuring the correct orientation.
3. Tun TF kaadi ideri.
4. Finally, secure the cover by tightening the two screws.

Note: Pay attention to the direction of the card cover during reinstallation.

6. Mounting Bracket Installation Instructions

6.1. Details of Bracket Accessories

6.2. Bracket Installation Steps

1. Install the TPU pads in size order on the corresponding slots of the bracket bottom cover and bracket connecting rod.
2. Install the bracket bottom cover on the handlebar.
3. Install the bracket connecting rod and bracket bottom cover together.
4. Use screw 2 to secure them.
5. Secure the bracket assembly and the main unit with screw 2.

7. Cable Clicker Installation Instructions

To install the cable clicker control:

1. Install the cable clicker control on the left handlebar of the motorcycle.
2. Ṣe aabo rẹ pẹlu awọn skru.

8. Awọn ilana Asopọmọra

8.1. Power Cable Connection Instructions

Connect the power cable to the motorcycle battery as follows:

• Red wire: Connect to ACC (Accessory power).
• Yellow wire: Connect to B+ (Battery positive).
• Black wire: Connect to ground.

Akiyesi: Make sure to confirm the corresponding ACC/B+/ground interfaces on the motorcycle, connect them one-to-one, and tighten. Please use the original power cable.

8.2. BM Connector Wiring Instructions

Connect the components using the BM connectors:

1. Connect the front and rear cameras to the corresponding BM connector on the main unit and tighten them. (Wires are marked with Front/Rear CH1/2).
2. Connect the cable clicker control to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Controller).
3. Connect the power cable to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Power).

9. Front and Rear Camera Installation Instructions

Fi sori ẹrọ ni iwaju ati ki o ru kamẹra lọtọ ni iwaju ati ki o ru ti alupupu, ki o si oluso wọn ni ibi.

10. Overall Installation Schematic

This diagram illustrates the complete installation of the NaviFly F83 system on a motorcycle.

11. Interface Alaye

The main interface of the device features several buttons and indicators:

1. Bọtini Ile: Tẹ lati pada si oju-iwe ile.
2. Bọtini Imọlẹ: Tẹ lati ṣatunṣe imọlẹ iboju.
3. Bọtini Ọna abuja Ijade Olohun: Tẹ-ọkan lati tẹ iboju ifihan fun sisopọ awọn agbekọri Bluetooth si foonu naa.
4. Bọtini Ọna abuja kamẹra: Tẹ lati view wiwo gbigbasilẹ.
5. Bọtini Yipada: Tẹ lati yipada laarin iboju kamẹra iwaju, iboju kamẹra ẹhin, ati iṣaaju alupupuview.
6. Bọtini Gbigbasilẹ: Tẹ lati bẹrẹ gbigbasilẹ fidio, tẹ lẹẹkansi lati da gbigbasilẹ duro.
7. Bọtini Fọto: Tẹ lati ya fọto pẹlu titẹ kan.
8. Bọtini Titiipa: Titii fidio gbigbasilẹ lọwọlọwọ lati ṣe idiwọ pipadanu.
9. Apple Carplay: Sopọ si awọn ẹrọ Apple.
10. Android Auto: Sopọ si Android awọn ẹrọ.
11. Fidio WiFi: Tẹ lati tẹ ipo asopọ sii, wo ati ṣe igbasilẹ awọn fidio sori foonu rẹ.
12. Ijade ohun: After Carplay/Auto phone projection, the phone's Bluetooth can connect to Bluetooth headphones for music playback or answering calls.
13. Sisisẹsẹhin fidio: Tẹ lati view awọn fidio loju iboju fidio.
14. Eto: Tẹ lati wọle si akojọ aṣayan eto.

12. Automatic Brightness Adjustment

The built-in light sensor automatically detects ambient light and adjusts screen brightness for comfort. In automatic brightness mode, manual adjustment is disabled.

• Click the "AUTO" button on the sidebar to enable/disable automatic brightness.
• Lightly press the "AUTO" button to switch to automatic brightness mode.
• You can set minimum and maximum brightness values. Drag the white dot button on the left to set the minimum, and the right button for the maximum. Settings are saved automatically.

13. Rain Mode (Screen Lock)

To prevent accidental touches from raindrops on rainy days, you can activate Rain Mode:

• Mu ṣiṣẹ: Long-press the third button on the cable clicker control for 5 seconds. Once activated, touchscreen functionality will be disabled.
• Ṣii silẹ: Long-press the third button on the cable clicker control for 5 seconds again.

14. Awọn ẹya ara ẹrọ Asopọmọra

14.1. Apple CarPlay

Lati so iPhone rẹ pọ nipasẹ Apple CarPlay:

1. Click the [Apple CarPlay] button on the device interface.
2. Lori iPhone rẹ, tan Wi-Fi ati Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the CarPlay connection prompt on your iPhone.

Note: The Apple CarPlay option only supports Apple phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.2. Android Auto

Lati so foonu Android rẹ pọ nipasẹ Android Auto:

1. Click the [Android Auto] button on the device interface.
2. Lori foonu Android rẹ, tan Wi-Fi ati Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the Android Auto connection prompt on your Android phone.

Note: The wireless Android Auto option only supports Android phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.3. WiFi Video

Lati sopọ fun iṣẹ ṣiṣe Fidio WiFi:

1. Scan the QR code on the device screen to download the corresponding application (Viidure).
2. Open the application and follow the prompts to connect to the device's WiFi. (WiFi Name: RTSP-XXXXX, Password: 12345678).
3. Once connected, the device will enter the recording screen, and you can view or download recorded videos, and adjust machine parameters via your phone.

Note: Closing the WiFi on your phone will disconnect the connection. It takes approximately one minute after disconnecting to operate on the machine.

15. Dash Cam Operation

When the device is in recording mode, camera images will not be displayed on the main page. To view the camera images, click the camera icon. When a card is inserted, the system automatically enters recording mode. During recording, the red dot in the recording icon will blink.

16. Ijade ohun

After connecting to Apple CarPlay or Android Auto for screen mirroring, you can use your phone's Bluetooth to connect to the motorcycle's Bluetooth headphones. Once connected successfully, all sounds produced by the device will be transmitted to the motorcycle's Bluetooth headphones for playback.

Pataki: If there are any sound abnormalities, please disconnect the phone from the headphones and reconnect.

17. Sisisẹsẹhin fidio

To enter the video playback interface, click the [Video Playback] button on the main screen.

In the playback interface:

• You can select [Video], [Photo], or [Locked Video] folders.
• Tẹ awọn bọtini yan tókàn si a file lati parẹ, tii, tabi sii.
• Click the play/pause button to play or pause the video.
• Click the next/previous buttons to switch to the next video or photo.
• Tẹ bọtini iboju kikun lati mu fidio ṣiṣẹ ni iboju kikun.
• Click the back button to return to the previous screen.

18. Eto

The settings options are divided into three main parts: General, Camera, and System.

18.1. Eto Gbogbogbo

• Imọlẹ: Adjust screen brightness (see section 12).
• Fọwọkan Iranlọwọ: This is a floating window button in screen projection mode on your phone.
• Ko awọn isopọ kuro: Clear the connection history with your phone (Bluetooth, WiFi, screen playback).
• Ipo Fọwọkan: Choose between normal mode or rain mode. In rain mode, touch disable function can be enabled by long pressing the square control button.

18.2. Eto kamẹra

• Ipinnu Igbasilẹ: Set video resolution to 1080P or 720P (default is 1080P).
• Split Time (Segmented Time): Set video segmentation time to 1, 3, or 5 minutes (system default is 1 minute).
• Microphone (Recording Sound): Tan gbigbasilẹ gbohungbohun tan tabi paa.
• Aworan Digi Tẹhin: Turn rear camera mirror image on or off for flexible camera installation.

18.3. Eto Eto

• Èdè: Select operating language (Simplified Chinese, Traditional Chinese, English, Russian, Spanish, French, German, Japanese, Korean, Italian, Portuguese).
• Ọjọ ati Aago: Set year, month, day, hour, minute, second, and time format.
• Alaye Ibi ipamọ: View memory card information, including remaining available capacity.
• Ilana: Format all data on the inserted memory card. It is recommended to manually format the card upon first insertion and regularly thereafter.
• Idapada si Bose wa tele: Restore all settings to their initial state.
• Ẹya famuwia: View awọn ti isiyi famuwia version.

19. Troubleshooting (Common Issues)

20. Awọn imọran olumulo

• For optimal performance, ensure your phone's operating system and the device's firmware are up to date.
• Regularly check and clean camera lenses for clear recordings.
• Periodically format your memory card to maintain recording stability and free up space.
• When connecting to Carplay/Android Auto, ensure your phone's Bluetooth and Wi-Fi are enabled and correctly paired.

21. Atilẹyin ọja & Atilẹyin

The NaviFly F83 comes with a 365-day free replacement warranty. For any quality problems, please contact the seller to confirm the issue. After confirming, return the item to the seller, and upon receipt, a new item will be sent to you.

Fun iranlọwọ siwaju tabi si view the official user manual in PDF format, please refer to the following document: NaviFly F83 User Manual (PDF).