1. Ifihan
The XTOOL XTS500 is a high-performance J2534 VCI (Vehicle Communication Interface) device designed for comprehensive automotive diagnostics and programming. Powered by an NXP Processor, it supports both 12V gasoline and 24V diesel systems, offering versatile connectivity options including wired and stable 2.4G WiFi. This tool is compatible with all mainstream vehicle communication protocols from 1996 onwards, including Dual-CAN, DoIP (for BMW/Mercedes), and CAN-FD (for GM models 2020+). The XTS500 provides OE-level diagnostic and programming capabilities, making it an essential tool for professional technicians.
2. Alaye Aabo
Please read and understand all safety instructions before using the XTOOL XTS500. Failure to follow these instructions may result in electric shock, fire, or serious injury. This device is intended for use by trained professionals. Always refer to the vehicle manufacturer's service manual for specific diagnostic and programming procedures.
- Ensure the vehicle's ignition is off before connecting or disconnecting the device.
- Do not operate the device in wet conditions or in the presence of flammable liquids or gases.
- Wọ àwọn ohun èlò ààbò ara ẹni tó yẹ, títí kan ààbò ojú.
- Jeki ẹrọ naa kuro ni awọn aaye oofa ti o lagbara.
- Always use a stable power supply for the vehicle when performing ECU programming or coding to prevent data corruption.
- OEM software is required for many advanced functions and is not provided with this tool. Ensure you have legitimate and up-to-date OEM software.
3. Package Awọn akoonu
The XTOOL J2534 VCI package includes the following items:
- XTOOL J2534 VCI Device
- USB Alailowaya olugba
- Itọsọna olumulo
- USB-C si okun USB-C
- USB-C to USB-A Adapter
- OBD2 Extension Cable
4. Ọja Ipariview
4.1 Key Awọn ẹya ara ẹrọ
- Olùṣètò Pápá-Thru J2534: Performs OE-level vehicle diagnostics and programming.
- OEM-Level Full System Diagnostics: Comprehensive scans across all available vehicle systems.
- OE-Standard Reprogramming and Calibration: Allows writing of OEM software, ECU resetting, and performance calibration.
- Ṣíṣe Kóòdù ECU Tó Tẹ̀síwájú: Enables flashing hidden features, personalizing vehicle settings, and disabling unwanted functions.
- Dual-CAN, CAN-FD/DoIP Support: Compatible with modern vehicle communication protocols.
- Bi-directional Control & Active Tests: Precise validation of vehicle system performance through direct bidirectional communication.
- All Available Reset Services: Supports a wide range of special functions as per OEM software capabilities.
- Asopọmọra Meji: Supports both wired (Type-C) and wireless (Wi-Fi) connections.
- Ibori Ọkọ nla: Supports 18+ major car brands (e.g., Toyota, Honda, GM, Ford, Nissan, Audi, Mercedes, BMW).
4.2 Hardware Loriview
The XTS500 is built with premium hardware for reliable performance.
- Olupilẹṣẹ: NXP isise
- Iboju: 0.97-inch Monochrome Display
- Awọn ọna Voltage Ibiti: 9-36V
- Iwọn Iṣiṣẹ: 0 si 40°C (32°F si 104°F)
- Ibi ipamọ otutu: -40 si 60°C (-40°F si 140°F)
5. Eto
5.1 System Awọn ibeere
The XTOOL XTS500 is compatible with Windows PC operations. It only supports Windows 7 and later versions. It is not compatible with macOS systems.
5.2 J2534 Driver Download and Installation
To use the XTS500, you must first download and install the J2534 driver on your Windows PC.
- Ṣabẹwo si XTOOL osise naa webojula: www.xtooltech.com
- Lilö kiri si awọn Atilẹyin apakan, lẹhinna yan Download Center.
- Locate and download the "J2534 Toolbox" software.
- Tẹle awọn ilana loju iboju lati pari fifi sori ẹrọ.
5.3 Awọn ọna asopọ
The XTS500 offers both wired and wireless connectivity.
5.3.1 Wi-Fi Connection (General Diagnostic Functions)
Wi-Fi is suitable for general J2534 diagnostic functions and offers a range of over 32ft (10 meters).
- Plug the OBDII-16 connector from the VCI box into the vehicle's DLC (Data Link Connector) port.
- Connect the USB wireless receiver to an available USB port on your computer.
- On your computer, go to Wi-Fi settings. Select the network named "WLAN 2".
- Locate and connect to the Wi-Fi hotspot matching your device's serial number.
- Once connected, your computer is linked to the device and ready for operation.
5.3.2 Wired Connection (Critical Operations)
A wired connection using the provided USB-C to USB-C cable is strongly recommended for critical scenarios to ensure stable and uninterrupted data transfer, preventing potential damage to vehicle modules.
- Ètò ECU: Ensures stability during firmware flashing or module programming.
- Ifaminsi ECU: Provides a reliable connection for writing configuration data and customizing settings.
- Diagnostics via DoIP (Diagnostics over Internet Protocol): Essential for high-volume data transmission without interference.
Note: For ECU programming, coding, and DoIP diagnostics, always use a wired connection to prevent data instability or interruption.
6. Awọn ilana Iṣiṣẹ
Important: All advanced functions described below require OEM software support. XTOOL does not provide OEM software.
6.1 OEM-Level Full System Diagnostics
The XTS500 diagnostic tool performs comprehensive scans across all available systems in supported vehicles. This includes:
- Reading and clearing trouble codes (DTCs).
- Viewing live data streams and freeze frame data.
- Checking ECU information.
- Performing active tests and special functions.
- Executing ECU coding.
6.2 ECU Programming and Reprogramming
The XTS500 enables dealer-level ECU programming, including:
- Flashing ECU firmware via OEM server.
- Updating and reprogramming ECU modules.
- Upgrading to the latest software versions.
- Reinitializing systems with factory data.
6.3 Ṣíṣe Kóòdù ECU Tó Tẹ̀síwájú
The XTS500 delivers professional dealer-grade ECU Coding, allowing you to:
- Personalize vehicle settings.
- Match/code newly replaced ECUs.
- Perform component/module synchronization.
- Enable/disable comfort functions (e.g., adjusting chime sounds, automatic mirror folding, deactivating Start/Stop, disabling seat belt reminders).
6.4 Ìṣàkóso Ìtọ́sọ́nà Méjì àti Àwọn Ìdánwò Alágbára
This function allows technicians to interactively command and evaluate electronic components and subsystems for accurate fault isolation and operational verification. Supported active tests include:
- Testing door locks.
- Activating/deactivating sound horn.
- Turning on/off lights.
- Àwọn dígí iṣẹ́.
- Ṣíṣí/típa àwọn fèrèsé.
- Modulating throttle.
- Turning on radiator fan.
6.5 Awọn Iṣẹ Atunto
The XTS500 supports a wide array of special functions and reset services, which are dependent on the capabilities of the OEM software being used. Example pẹlu:
- Atunto Epo
- ABS ẹjẹ
- BMS Tun
- Ifaminsi abẹrẹ
- EPB Tun
- A/C Tún kọ́ ẹ̀kọ́
- Fifun Aṣamubadọgba
- DPF Regen
- Gearbox Adaptation
- Iṣatunṣe ADAS
- HV Battery diagnostics
- Ijoko odiwọn
- Transport Mode activation
- Duro/ Bẹrẹ Tunto
6.6 Supported Protocols and Vehicle Coverage
The XTS500 supports J2534 Pass-Thru protocols, Dual-CAN, CAN-FD, and DoIP, along with other industry-standard protocols:
- ISO 14229, ISO 14230, ISO 15031, ISO 27145, ISO 9141, ISO 15765, ISO 11898, ISO 13400
- SAE J1708, SAE J1939, SAE J1587, SAE J1850
OEM software support is provided for 18 major automotive brands, with coverage typically from 1991-2005 to current models, depending on the brand (e.g., Toyota, Lexus, Scion, Acura, Honda, GM, Ford, Nissan, Infiniti, Audi, Skoda, VW, Subaru, Land Rover, Jaguar, Mercedes, Porsche, BMW).
7. Itọju
To ensure the longevity and optimal performance of your XTOOL XTS500, follow these maintenance guidelines:
- Ninu: Regularly clean the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.
- Itọju USB: Inspect cables for any signs of damage before each use. Replace damaged cables immediately.
- Awọn imudojuiwọn sọfitiwia: Keep your J2534 Toolbox software updated to the latest version to ensure compatibility and access to new features.
8. Laasigbotitusita
If you encounter issues with your XTOOL XTS500, refer to the following common troubleshooting steps:
- Ẹrọ Ko Sopọ:
- Ensure the OBDII-16 connector is securely plugged into the vehicle's DLC port.
- Verify the USB wireless receiver is properly inserted into your PC, or the Type-C cable is securely connected for wired mode.
- Check your PC's Wi-Fi settings to ensure connection to the correct "WLAN 2" hotspot for wireless operation.
- Restart both the XTS500 device and your PC.
- Sọfitiwia Ko ṣe idanimọ Ẹrọ:
- Confirm that the J2534 driver "J2534 Toolbox" is correctly installed on your Windows PC.
- Ensure your Windows operating system is Windows 7 or higher.
- Check for any firewall or antivirus software that might be blocking the connection.
- Data Transmission Errors During Programming/Coding:
- Always use a wired (Type-C) connection for ECU programming, coding, and DoIP diagnostics to ensure maximum stability.
- Ensure the vehicle battery is fully charged or connected to a stable power supply during these critical operations.
- Avoid interrupting the process once it has started.
- Functionality Issues with Specific Vehicles/Models:
- Verify that your OEM software supports the specific vehicle and function you are attempting.
- Ensure your OEM software is up-to-date.
- Vehicle/model compatibility depends entirely on the OEM software support.
9. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Orukọ awoṣe | XTS500 |
| Orukọ Brand | XTOOL |
| isise | NXP isise |
| Iboju | 0.97-inch Monochrome Display |
| Awọn ọna ṣiṣe PC ti o ni atilẹyin | Windows 7 or higher (Not for macOS) |
| Ibaraẹnisọrọ Interface | OBD-II, Wi-fi |
| Awọn ọna asopọ | Wired (Type-C) and Wi-Fi |
| Asopọmọra Iru | Iru-C |
| Awọn Ilana atilẹyin | J2534, Dual CAN, CAN FD, DoIP, ISO 14229, ISO 14230, ISO 15031, ISO 27145, ISO 9141, ISO 15765, ISO 11898, ISO 13400, SAE J1708, SAE J1939, SAE J1587, SAE J1850 |
| Awọn ọna Voltage Ibiti | 9-36V |
| Awọn iwọn otutu ti nṣiṣẹ | 0 si 40°C (32°F si 104°F) |
| Ibi ipamọ otutu | -40 si 60°C (-40°F si 140°F) |
| Awọn iwọn (L×W×H) | 21.25cm × 17cm × 5cm (outer packaging) |
| Iwọn Nkan | 0.6kg |
| Ohun elo | Ṣiṣu |
| Ijẹrisi | CE |
| Imudojuiwọn Software | Àwọn Ìmúdàgbàsókè Ọ̀fẹ́ Ìgbà Ayé |
| Ẹya Hardware | 2025 |
| Ẹya Software | 2025 |
10. Awọn imọran olumulo
- OEM Software is Key: Remember that the full functionality of the XTS500, including advanced diagnostics, programming, and coding, relies heavily on compatible OEM software. Ensure you have the necessary subscriptions and software installed.
- Firanṣẹ fun Iduroṣinṣin: For critical operations like ECU programming, coding, or DoIP diagnostics, always opt for the wired Type-C connection. This minimizes the risk of data corruption due to unstable wireless signals.
- Mileage Modification: The XTS500 is primarily designed for OE-level diagnostics, programming, coding, and reset services. While some OEM software might offer specific functions related to mileage, the device itself does not inherently provide a universal mileage modification feature. Such capabilities are dependent on the specific OEM software and vehicle model.
- Atilẹyin ede: The device's interface and diagnostic output language are typically determined by the OEM software you are using. Check the settings within your OEM software for available language options.
11. Atilẹyin ọja ati Support
XTOOL is committed to providing high-quality products and excellent customer service.
- Atilẹyin ọja: The XTOOL XTS500 comes with a 2-year warranty.
- Oluranlowo lati tun nkan se: Lifetime technical support is provided for the device.
- Iṣẹ Ayelujara: XTOOL offers 24-hour online service and professional technical support.
- Awọn imudojuiwọn sọfitiwia: Enjoy lifetime free updates for the device's software.
For any technical assistance or inquiries, please contact XTOOL customer support through their official channels.
