ATORCH S1BWT Wi-Fi Smart Thermostat Socket User Manual

1. Ifihan

Welcome to the Internet of Things (IoT) era with the ATORCH S1BWT Wi-Fi Smart Thermostat Socket. This device is designed to provide remote measurement and control capabilities, allowing you to monitor and manage your electrical appliances and temperature settings from anywhere using a mobile application. It features intelligent AI voice control, multiple programming options, and automatic power-off safety controls for overvoltage and overcurrent conditions. The high-definition color screen displays real-time data such as voltage, current, power, electricity consumption, frequency, and power factor. It also shows current air temperature, calendar, and time. With its Wi-Fi connectivity, the device supports lifetime free firmware upgrades, ensuring continuous improvement and new features.

Figure 1: ATORCH S1BWT Wi-Fi Smart Thermostat Socket with mobile app interface and temperature probes.

2. Alaye Aabo

• Do not put temperature probes or metal wires into fire.
• Do not immerse metal magnetic probes into water, as this may lead to inaccurate measurements.
• Ensure the device is connected to a stable 2.4GHz Wi-Fi network (IEEE 802.11b/g/n supported).
• The device includes protective functions for over-voltage, over-current, and over-power. Do not attempt to bypass these safety features.
• Always ensure proper ventilation around the device and connected appliances.

3. Package Awọn akoonu

Apo naa pẹlu:

• 1 x ATORCH S1BWT Wi-Fi Smart Thermostat Socket (EU/US/UK/FR/AU plug type, depending on selection)
• 1 x 3-meter Temperature Probe (Waterproof NTC or Magnetic Metal NTC, depending on selection)

Note: The specific plug type and probe version will vary based on your purchase.

4. Ọja Ipariview

4.1. Device irinše

Figure 2: Labeled components of the ATORCH S1BWT Smart Thermostat Socket.

4.2. Display Interfaces

The device features 10 major display interfaces, accessible by short pressing the "+/-" buttons to switch between testing interfaces, and long pressing "+/-" to switch between ON/OFF/Cooling/Heating modes. These interfaces provide comprehensive data at a glance:

1. Large font display interface
2. Overpass voltage power protection temperature fault interface
3. Heating/cooling interface
4. Electricity price setting/billing interface
5. lọwọlọwọ voltage curve interface
6. Temperature curve interface
7. Switch(ON/OFF) interface
8. Daily, Monthly, and Annual Energy Record interface
9. Real time temperature display and history record
10. System backend settings column

Olusin 3: Pariview of the 10 Major Display Interfaces.

4.3. Probe Applications

The device supports two types of temperature probes:

• Waterproof Temperature Probe: Mainly used to test the temperature of water. Ideal for aquatic products breeding, fish tanks/aquariums, and tropical fish farming.
• Magnetic Metal Temperature Probe: Mainly used to test the surface temperature of metal objects. Suitable for radiators, conduits, and boilers.

Figure 4: Application scenarios for different temperature probes.

5. Awọn pato

Table 1: ọja pato

5.1. Awọn Iwọn ọja

olusin 5: Awọn iwọn ọja.

6. Eto

6.1. App sori

To use the remote control features, download the "Smart Life" or "Tuya" app from your mobile app store (Google Play Store for Android, Apple App Store for iOS).

6.2. Wi-Fi Network Connection & App Pairing

Follow these steps to connect your device to Wi-Fi and pair it with the app:

1. Ṣe igbasilẹ ohun elo Smart Life: Wa fun "Smart Life" or "Tuya" in your app store and install it.
2. Agbara Lori Ẹrọ: Plug in the ATORCH S1BWT. The device's red light will flash, indicating it's waiting for Wi-Fi connection.
3. Fi Ẹrọ sinu App:
   • Open the Smart Life app. A pop-up may appear to add a device; click "Add" to proceed.
   • If no pop-up, manually select to add a device.
   • Select your working Wi-Fi network and enter the 2.4GHz Wi-Fi password.
   • Confirm the device is flashing and proceed with pairing.
   • Once pairing is complete, click "Done".
4. Isakoṣo latọna jijin: After a successful Wi-Fi connection, open the app to remotely control and monitor your device.

Figure 6: Smart Life APP pairing operation steps (Part 1).

Figure 7: Smart Life APP pairing operation steps (Part 2).

7. Isẹ

7.1. Basic Device Control

The device supports three main operating modes, switchable via the mobile app or directly on the device:

• Switch (ON/OFF) Interface: Simply turn the connected appliance on or off.
• Heating Mode Control: Set a desired start temperature (heating below this temperature) and stop temperature (heating above this temperature). The device will automatically turn on/off the heating appliance to maintain the set range. The stop temperature must be at least three degrees higher than the start temperature.
• Iṣakoso Ipo Itutu: Set a desired start temperature (cooling above this temperature) and stop temperature (cooling below this temperature). The device will automatically turn on/off the cooling appliance to maintain the set range. The stop temperature must be at least three degrees lower than the start temperature.

Figure 8: Mobile App Interface for Switch, Heating, and Cooling Modes.

7.2. Iṣeto

The smart app allows you to set up intelligent timing schedules for various electrical switches. This feature helps save energy and provides convenient control without manual intervention.

• Switching Mode Schedule: Set specific times for the device to turn on or off.
• Heating Mode Schedule: Program heating start and stop times and temperatures.
• Cooling Mode Schedule: Program cooling start and stop times and temperatures.

Figure 9: Scheduling functions in the mobile app.

7.3. Data Monitoring and Reports

The device provides real-time detection and statistics of voltage, current, power, and temperature. You can view daily, monthly, and annual energy consumption reports through the app.

• Vol lọwọlọwọtage Curve and Peak Value Record: View historical data for voltage ati lọwọlọwọ.
• Celsius Fahrenheit Temperature Curve and Peak Record: Monitor temperature trends over time.
• Energy Consumption Data: Access daily, monthly, and annual reports on electricity usage.

Figure 10: Data Statistics and Reports.

7.4. Iṣiro agbara

The device calculates active power using the formula: P = U * I * cos φ (Power = Voltage × Current × Power Factor). It does not simply use P = U * I.

Figure 11: Active Power Calculation Formula.

7.5. Electricity Fee Calculation Modes

The device offers three electricity tariff modes to meet different needs:

• Single Rate Price: Only single rate electricity prices can be set to calculate electricity bills.
• Ladder Price: Can set two types of electricity tariff coefficients. When the current electricity level reaches a corresponding value, two different electricity charges will be calculated.
• Peak Valley Price: 24-hour segmented setting is available. Electricity price parameters can be set freely, and the power coefficient can also be based on requirements.

Figure 12: Electricity Fee Calculation Modes.

8. Itọju

To ensure optimal performance and longevity of your ATORCH S1BWT Smart Thermostat Socket, follow these maintenance guidelines:

• Ninu: Mu ẹrọ naa nu pẹlu gbẹ, asọ asọ. Ma ṣe lo abrasive ose tabi epo.
• Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju nigbati o ko ba wa ni lilo fun awọn akoko gigun.
• Itọju Iwadii: Handle temperature probes carefully. Avoid bending or damaging the probe wires. Keep probes clean and free from debris.
• Awọn imudojuiwọn famuwia: Regularly check for and install firmware updates to ensure the device has the latest features and security patches.

9. Laasigbotitusita

9.1. Fault Alarm Function

The device is equipped with a fault alarm function to ensure safety. It provides multiple alarms for abnormal temperature conditions:

• Full Screen Display Alarm: Visual alert on the device screen.
• Buzzer Urgent Sound Alarm: Audible alert from the device.
• APP Notification Alarm: Alerts sent to your mobile application.
• APP Large Background Text Alarm: Detailed alarm information in the app.
• Preset Telephone Alarm: (Requires ordering this service) Notification via phone call.
• Preset SMS Alarm: (Requires ordering this service) Notification via SMS.

These alarms are triggered if the temperature probe is damaged, short-circuited, the built-in relay is abnormal, or if the set fault temperature alarm threshold is exceeded. If an alarm occurs, click the red area in the app to exit the alarm interface.

Figure 13: Fault Alarm Function and Notifications.

9.2. Automatic Power-Off Protection

The device features double alarm and quadruple power-off protection for safer electricity usage:

• Lori-voltage automatic power-off protection: Ti o ba jẹ voltage exceeds 265V or drops below 238V (example values), the device will automatically power off.
• Over-current automatic power-off protection: If current exceeds 16.00A (example value), the device will automatically power off.
• Over-power automatic power-off protection: If power exceeds 3600W (example value), the device will automatically power off.
• Kekere-voltage automatic power-off protection: Ti o ba jẹ voltage drops below a critical threshold (e.g., 233.5V to 238V), the device will automatically power off.

You can access additional function test interfaces by long pressing the "+" button on the device.

Figure 14: Double Alarm, Quadruple Power OFF Protection.

9.3. Awọn oran Asopọ Wi-Fi

• Rí i dájú pé nẹ́tíwọ́ọ̀kì Wi-Fi rẹ jẹ́ 2.4GHz. Ẹ̀rọ náà kò ṣe àtìlẹ́yìn fún àwọn nẹ́tíwọ́ọ̀kì 5GHz.
• Ṣayẹwo pe ọrọ igbaniwọle Wi-Fi rẹ tọ.
• Rii daju pe ẹrọ naa wa laarin aaye ti olulana Wi-Fi rẹ.
• Restart the device and your router, then try the pairing process again.
• Ensure Bluetooth and location permissions are enabled on your phone during the pairing process.

10. Awọn imọran olumulo

Ko si kan pato olumulo awọn italolobo wà wa lati tunviews or Q&A for this product at this time. However, general tips for smart home devices include:

• Awọn imudojuiwọn Famuwia deede: Keep your device's firmware updated for the best performance and security.
• Iduroṣinṣin nẹtiwọki: A stable 2.4GHz Wi-Fi network is crucial for reliable remote control and data logging.
• Ibi Iwadii: Ensure temperature probes are placed correctly for accurate readings, avoiding direct sunlight or drafts that could skew measurements.
• Iwakiri App: Take time to explore all features within the Smart Life or Tuya app, including scheduling, data reports, and parameter settings, to maximize the device's utility.

11. Atilẹyin ọja & Atilẹyin

11.1. famuwia Upgrades

The ATORCH S1BWT offers a lifetime free firmware upgrade function via Wi-Fi networking. This ensures your device remains up-to-date with the latest features and improvements.

Figure 15: Wi-Fi Networking Remote Firmware Upgrade.

11.2. Bluetooth Firmware Upgrade (Android Only)

For Android users, a PC Online OTA Bluetooth firmware upgrade is also available. This allows for lifetime free upgrades via a wireless Bluetooth computer connection or an Android mobile app.

1. Scan the QR code on your Android phone to download the corresponding APP software.
2. After installation, open the software and click on the Bluetooth icon to use it.
3. Add a Bluetooth device to the S1BWT-BLE serial port device online on a PC computer.
4. Scan the QR code to download the corresponding APP software and save it. Open the software without installation and select the newly added Bluetooth serial port model to successfully connect and use it.

Note: This Bluetooth function only supports Android, not iOS.

Figure 16: PC Online OTA Bluetooth Upgrade (Android Only).

11.3. Olubasọrọ Support

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the ATORCH official webojula.