70mai Jump Starter Max Midrive PS06 User Manual

1. Ifihan

The 70mai Jump Starter Max Midrive PS06 is a powerful and portable emergency device designed to jump start vehicles with dead batteries and serve as a power bank for electronic devices. With a peak current of 1000A and a battery capacity of 18000mAh, it is suitable for a wide range of vehicles and provides reliable power when you need it most.

2. Package Awọn akoonu

Jọwọ ṣayẹwo apoti fun awọn nkan wọnyi:

• 70mai Jump Starter Max Unit (x1)
• Smart Battery Clip (x1)
• DC to Cigarette Lighter Adapter (x1)
• Okun gbigba agbara (x1)
• Apo ipamọ (x1)

3. Ọja Ipariview

The 70mai Jump Starter Max features a compact design with essential ports and indicators for ease of use.

4. Awọn pato

5. Eto

5.1 Gbigba agbara akọkọ

1. Before first use, fully charge the 70mai Jump Starter Max.
2. Connect the provided charging cable to the input port on the jump starter.
3. Connect the other end of the charging cable to a suitable 5V 2A USB power adapter (not included).
4. The indicator lights will show the charging status. All lights will be solid when fully charged.

5.2 Ṣiṣayẹwo Ipele Batiri

Press the power button briefly to check the current battery level. The indicator lights will illuminate to show the remaining charge.

6. Awọn ilana Iṣiṣẹ

6.1 Fo Bibẹrẹ Ọkọ

Awọn iṣọra Aabo: Ensure the vehicle is in Park (P) or Neutral (N) and the parking brake is engaged. Turn off all vehicle accessories. Wear appropriate eye protection.

1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
2. Connect the smart battery clip to the 70mai Jump Starter Max unit.
3. So pupa (+) clamp of the smart battery clip to the positive (+) terminal of the vehicle's battery.
4. So dudu (-) clamp of the smart battery clip to the negative (-) terminal of the vehicle's battery.
5. Ensure the smart battery clip indicator light is green, indicating a correct connection. If it's red or flashing, check the connections.
6. Bẹrẹ ẹrọ ọkọ ayọkẹlẹ naa.
7. Once the engine starts, immediately remove the smart battery clip from the jump starter unit.
8. Lẹ́yìn náà, yọ dúdú (-) cl kúròamp from the vehicle battery, followed by the red (+) clamp.

6.2 Lilo bi Bank Power

The 70mai Jump Starter Max can also charge your electronic devices.

1. Connect your device's USB charging cable to the USB output port (5.0V 2.4A) on the jump starter.
2. Ibẹrẹ fo yoo bẹrẹ laifọwọyi gbigba agbara ẹrọ rẹ.

7. Itọju

7.1 Gbigba agbara

• Recharge the jump starter after each use.
• For optimal battery life, recharge the unit every 3-6 months, even if not used.

7.2 Ibi ipamọ

• Tọ́jú ìbẹ̀rẹ̀ náà sí ibi tí ó tutù tí ó sì gbẹ, kúrò níbi tí oòrùn kò ti lè tàn án tàbí ibi tí ó gbóná janjan.
• Jeki o kuro ni arọwọto awọn ọmọde.
• Use the provided storage bag to protect the unit and accessories.

7.3 Ninu

• Mu ese kuro pẹlu asọ ti o gbẹ.
• Maṣe lo awọn kemikali lile tabi awọn afọmọ abrasive.

8. Laasigbotitusita

8.1 Vehicle Does Not Start

• Ṣayẹwo awọn asopọ: Ensure the smart battery clips are securely connected to the correct terminals of the vehicle battery and the jump starter. The smart clip indicator should be green.
• Jump starter battery level: Make sure the jump starter has sufficient charge. Recharge if necessary.
• Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, multiple attempts or a longer connection might be needed. If the vehicle still doesn't start after a few attempts, there might be another issue with the vehicle.

8.2 Jump Starter Not Charging

• Check charging cable: Ensure the charging cable is properly connected to both the jump starter and the power adapter.
• Adaparọ agbara: Verify that the USB power adapter is functional and provides 5V 2A output.

8.3 Smart Battery Clip Indicator Issues

• Red light/Flashing: Indicates incorrect connection (reversed polarity), short circuit, or other safety issue. Disconnect immediately and re-check connections.
• Ko si imọlẹ: Ensure the clip is fully inserted into the jump starter port and the jump starter has power.

9. Awọn imọran olumulo

• Always keep the jump starter charged, especially before long trips or during cold weather.
• Store the unit in your vehicle for easy access during emergencies.
• Familiarize yourself with the smart battery clip's indicator lights to quickly identify connection issues.

10. Atilẹyin ọja ati Support

For warranty information and customer support, please refer to your purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.