HUTT C7 Intelligent Window Cleaning Robot

1. Ifihan ati Loriview

The HUTT C7 Intelligent Window Cleaning Robot is an advanced device designed for automatic and efficient cleaning of various vertical surfaces, including high-rise glass, marble, and wooden doors. It features innovative double-wheel drive suspension pressurization, AI intelligent frequency conversion, and a wide-angle water jet system to ensure thorough cleaning without slipping or leaving water stains. This manual provides essential information for the safe and effective use of your HUTT C7 robot.

2. Package Awọn akoonu

Jọwọ ṣayẹwo package ni pẹkipẹki lati rii daju pe gbogbo awọn nkan wa:

• HUTT C7 Host (Window Cleaning Robot)
• Turntable (pre-installed)
• Isakoṣo latọna jijin
• EAS Cleaning Pads
• Okun Aabo
• Adapter agbara
• Power Plug (EU/UK/AU/JP, depending on region)
• Water Filling Kettle
• Itọsọna olumulo
• Nozzle

3. Awọn ẹya Ọja

• Double-Wheel Drive Suspension Pressurization: Features independent dual motors and a 3D suspended chassis that applies 55N of pressurized suction, ensuring strong grip and preventing slipping. The triangular structure further enhances friction for stable cleaning.



• 70 rpm High-Speed Rotation: The cleaning discs rotate at 70 revolutions per minute, mimicking manual wiping in circular motions to effectively remove stubborn stains without damaging the glass.



• 5500Pa Afa Alagbara: A high-speed DC brushless fan provides powerful 5500Pa suction, easily removing dust, water stains, bird droppings, and other stubborn dirt.
• Wide-Angle Pressurized Water Spray: An innovative air booster water spray technology with ultra-fine 20μm water droplets efficiently dissolves up to 15 types of stains, including bird droppings, water stains, and mud spots. The 80ml visual water tank allows for cleaning an entire house without frequent refills.



• Agbara Mimọ Eti: Designed with a 1.5cm thick chassis and 5mm thickened rags, the robot can clean close to edges and window frames, ensuring comprehensive coverage and no dead ends.



• Versatile Surface Cleaning: The AI intelligent frequency conversion algorithm automatically adjusts adsorption force, making it suitable for cleaning glass, marble, tiles, and wooden doors.



• HUTT SLAM4.0 Intelligent Path Planning: Ensures 99% clean coverage by intelligently planning routes, avoiding obstacles, and providing sensitive steering on edges.
• Multiple Security Guarantees: Includes 0.04s real-time air pressure compensation, a 148kg load-bearing safety rope, and a built-in 650mAh battery for 25 minutes of power-off adsorption, preventing falls.



• Patented Integrated Power/Safety Line: An innovative design integrates the security rope with the power cord into one, preventing entanglement and making storage easy.

4. Eto

1. So awọn paadi mimọ: Ensure the EAS cleaning pads are securely attached to the rotating discs on the underside of the robot.
2. Kun Omi Omi: Open the water tank cap and use the provided kettle to fill the 80ml visual water tank with clean water or a suitable window cleaning solution. Close the cap tightly.
3. So agbara: Plug the power adapter into a 100-240V AC outlet. Connect the power cord to the robot.
4. So okun Aabo: Securely attach the safety rope to a sturdy fixture indoors, such as a heavy piece of furniture or a window frame anchor point. This is crucial for safety, especially when cleaning high-rise windows.
5. Ibi: Place the robot firmly on the surface you wish to clean. Ensure the suction cups make full contact with the surface.

5. Awọn ilana Iṣiṣẹ

1. Agbara Tan: Press the power button on the robot or the remote control to turn on the device. The indicator light will illuminate.
2. Bẹrẹ Isọmọ: Press the 'Start' button on the robot or the remote control. The robot will automatically adhere to the surface and begin its cleaning cycle.



3. Select Cleaning Mode (Optional): Use the remote control to switch between different cleaning modes: 'Deep Mode' for heavy stains, 'Daily Mode' for regular cleaning, or 'Fixed-Point Mode' for targeted cleaning.
4. Bojuto Omi Omi: Keep an eye on the visual water tank. Refill as needed to ensure continuous water spray during cleaning.
5. Ipari: Once the cleaning cycle is complete, the robot will return to its starting point and emit an alert. Carefully remove the robot from the surface.
6. Agbara Pa: Press the power button to turn off the robot.

6. Itọju

• Clean Cleaning Pads: After each use, remove the cleaning pads and wash them thoroughly. Allow them to air dry completely before reattaching or storing.
• Empty/Refill Water Tank: Empty any remaining water from the tank and rinse it. Refill with fresh water or solution before the next use.
• Awọn nozzles mimọ: Periodically check the water spray nozzles for blockages. Use a small brush or pin to clear any debris.
• Pa Robot kuro: Use a soft, dry cloth to wipe the exterior of the robot, removing any dust or residue.
• Ibi ipamọ: Store the robot in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the power cord and safety rope are neatly stored, utilizing the patented integrated design.

7. Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Robot is slipping or falling:
  • Ensure the cleaning surface is not excessively wet or oily before starting.
  • Check if the cleaning pads are too saturated or worn out. Replace if necessary.
  • Verify that the suction cups are clean and making full contact with the surface.
  • Confirm the safety rope is securely attached.
• Not cleaning effectively or leaving streaks:
  • Check if the water tank is empty or if the nozzles are clogged.
  • Ensure cleaning pads are clean and properly attached.
  • For heavily soiled windows, consider a pre-clean or use 'Deep Mode'.
• Rọ́bọ́ọ̀tì kò ṣiṣẹ́:
  • Verify the power adapter is securely plugged into both the outlet and the robot.
  • Ṣayẹwo iṣan agbara fun iṣẹ ṣiṣe.
  • If operating on battery backup, ensure the internal 650mAh battery is charged.
• Robot not moving or stuck:
  • Check for any obstacles on the cleaning surface.
  • Ensure the cleaning pads are not excessively dirty or tangled.
  • The AI intelligent path planning should handle most obstacles; if persistent, manually reposition.

8. Awọn pato

9. Awọn imọran olumulo

• Fífẹ́ àwọn fèrèsé tí ó ní ẹ̀gbin púpọ̀ tẹ́lẹ̀: For windows with thick layers of dirt or debris, it is recommended to manually remove the heaviest grime before using the robot to ensure optimal performance and prevent clogging.
• Use Appropriate Cleaning Solution: While water is sufficient for light cleaning, using a dedicated window cleaning solution (non-foaming) in the water tank can enhance cleaning results, especially for stubborn stains.
• Regular Pad Maintenance: Always clean the pads after each use. Having a spare set of clean pads ready can streamline your cleaning process.
• Okun Aabo to ni aabo: Always double-check that the safety rope is firmly attached to a stable indoor object before operating the robot, particularly on high windows.
• Iwọn iwọn otutu to dara julọ: For best results, operate the robot within a temperature range of 0-50℃.

10. Atilẹyin ọja ati Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your original retailer or the manufacturer's official webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.