Ìwé Ìtọ́sọ́nà Olùlò fún Ìmọ́tótó Ẹ̀rọ Onírun Ẹlẹ́dẹ̀ Lydsto S1

1. Ifihan

Welcome to the Lydsto S1 Robot Vacuum Cleaner user manual. This intelligent device is designed to provide a comprehensive cleaning solution for your home, featuring smart dust collection, high-precision sweeping and mopping, and advanced sterilization capabilities. With its self-emptying dustbin and UV lamp disinfection, the Lydsto S1 ensures a clean and hygienic living environment with minimal effort.

2. Awọn Ilana Aabo pataki

Please read all safety instructions carefully before using the Lydsto S1 Robot Vacuum Cleaner. Keep this manual for future reference.

• Ohun elo yii le ṣee lo nipasẹ awọn ọmọde ti o jẹ ọdun 8 ati ju bẹẹ lọ ati awọn eniyan ti o dinku ti ara, ifarako tabi awọn agbara ọpọlọ tabi aini iriri ati imọ ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo ni ọna ailewu ati loye awọn eewu ti o kan. .
• Awọn ọmọde yẹ ki o wa ni abojuto lati rii daju pe wọn ko ṣere pẹlu ohun elo naa.
• Ninu ati itọju olumulo ko le ṣe nipasẹ awọn ọmọde laisi abojuto.
• Do not use the robot vacuum in wet environments or near water.
• Ensure the charging station is placed on a level surface against a wall, away from heat sources.
• Do not use the robot vacuum to pick up large or sharp objects, liquids, or burning/smoking materials.
• Regularly check and clean the brushes and wheels to prevent entanglement.
• Only use the original power adapter and charging station provided with the device.
• Turn off the robot vacuum and unplug the charging station before performing any maintenance or cleaning.

3. Package Awọn akoonu

Jẹrisi pe gbogbo awọn paati wa ninu package rẹ:

• Lydsto S1 Robot Vacuum Cleaner
• Self-emptying Dustbin / Charging Station
• Adapter agbara
• Side Brushes (pre-installed or spare)
• Fẹlẹ akọkọ (ti a ti fi sii tẹlẹ)
• Dust Bag (pre-installed in station)
• Paadi Mop
• Afowoyi Olumulo (iwe-ipamọ yii)

4. Ọja Ipariview

Familiarize yourself with the components of your Lydsto S1 Robot Vacuum Cleaner and its self-emptying station.

Figure 4.1: Lydsto S1 Robot Vacuum and Self-emptying Station

Figure 4.2: Self-emptying Station with internal view of dust bag compartment

Figure 4.3: Diagram of UV lamp disinfection under the robot vacuum

Figure 4.4: Diagram of the powerful NIDEC motor inside the robot vacuum

5. Ni ibẹrẹ Oṣo

5.1 Placing the Charging Station

• Place the self-emptying dustbin/charging station against a wall in an open area.
• Ensure there is at least 0.5 meters of clear space on both sides and 1.5 meters in front of the station for the robot to navigate easily.
• Plug the power adapter into the charging station and then into a wall outlet.

5.2 Gbigba agbara akọkọ

• Place the Lydsto S1 robot vacuum onto the charging station. Ensure the charging contacts on the robot align with those on the station.
• The robot will begin charging. For first-time use, it is recommended to fully charge the robot before its initial cleaning cycle.

5.3 Ìsopọ̀ àti Ìtòlẹ́sẹẹsẹ Àpù

• Download the Lydsto app from your smartphone's app store.
• Follow the in-app instructions to connect your Lydsto S1 to your home Wi-Fi network (supports IEEE 802.11b/g/n 2.4GHz).
• Once connected, initiate an initial cleaning cycle. The robot will use its LDS SLAM+VSLAM navigation system to scan and create a detailed map of your home. This map is crucial for efficient cleaning and advanced features like virtual walls and zone cleaning.

Figure 5.1: Lydsto S1 App Control Interface

Figure 5.2: Lydsto S1 Dynamic Management Planning and Mapping

6. Awọn ilana Iṣiṣẹ

The Lydsto S1 offers various cleaning modes and smart features for a customized cleaning experience.

6.1 ninu awọn ipo

The robot vacuum supports three primary cleaning modes, selectable via the app:

• Gbígbà kan ṣoṣo: The robot focuses solely on vacuuming, effectively sweeping away dust and debris.
• Single Drag (Mop): The robot performs wet mopping with constant humidity to remove grease and light stains.
• Sweep and Mop: A combined mode for comprehensive cleaning, tackling both dust and stubborn stains.

Figure 6.1: Lydsto S1 Three Sweeping and Mopping Modes

6.2 Smart App Iṣakoso

Utilize the Lydsto app for enhanced control and customization:

• Isakoṣo latọna jijin: Start, pause, or stop cleaning from anywhere.
• Igbesoke OTA lori Ayelujara: Receive firmware updates to improve performance and add new features.
• Isọdi Ohùn: Personalize voice prompts and notifications.
• Dynamic Management Planning:
• Room Recognition: The robot autonomously recognizes and partitions rooms.
• Virtual Wall/Forbidden Area: Set up no-go zones precisely on the map.
• Smart Breakpoints: The robot can resume cleaning from where it left off after charging.
• Multi-floor Memory: Stores maps for multiple floors (up to 5 local maps).

6.3 Wet Mopping Function

The intelligent water tank precisely controls water speed and volume, offering three-level adjustment to ensure optimal mop humidity while protecting your floors from being soaked:

• Minor water amount: 1.251 mL/min
• Medium water amount: 2.502 mL/min
• Large water amount: 3.753 mL/min

Figure 6.2: Lydsto S1 Wet Mopping Water Control

6.4 Idiwo

The Lydsto S1 is equipped with 18 types of 29 sensors, allowing it to sensitively perceive complex environments, effectively prevent collisions, and avoid falling down stairs.

Figure 6.3: Lydsto S1 Obstacle Avoidance with 29 sensors

6.5 Product Features Overview Fidio

7. Itọju

Regular maintenance ensures optimal performance and longevity of your Lydsto S1.

7.1 Self-emptying Dustbin and Dust Bag

• The self-emptying dustbin automatically collects dirt from the robot's internal dust box.
• The large-capacity sealed dust bag in the station means you don't need to manually empty the robot's dustbin frequently. One dust bag can hold approximately ten dust boxes of rubbish.
• When the dust bag is full, the mobile app will notify you to replace it.
• The dust collector features a built-in 0.05ppm ozone sterilization module to effectively remove bacteria and odors in the dust collection process and in the dust bag.

Figure 7.1: Dust bag, dust collection, ozone, and battery status lights display

Figure 7.2: Dust collector ozone permeable sterilization and odor removal

7.2 UV Lamp Disinfection

• The main unit comes with a 4*12MW ultraviolet germicidal lamp, which can effectively kill 99.9% of Escherichia coli and Staphylococcus aureus during the cleaning process.
• Ensure the UV lamp area on the underside of the robot is kept clean for effective sterilization.

7.3 Àwọn fọ́ọ́lù àti Àlẹ̀mọ́

• Regularly inspect and clean the main brush and side brushes for tangled hair or debris.
• Clean or replace the filter in the robot's internal dust box as needed to maintain suction power.

7.4 Omi Tanki ati Paadi Mop

• Empty and clean the water tank after each mopping session to prevent mold or odors.
• Wash and dry mop pads thoroughly after use.

8. Laasigbotitusita

If you encounter issues with your Lydsto S1, refer to the following common problems and solutions:

9. Awọn pato

9.1 Isenkanjade Igbale Robot

9.2 Dust Collecting Charging Pile

10. Awọn imọran olumulo

• For optimal mapping and navigation, ensure good lighting conditions during the initial mapping run.
• Regularly check the dust bag status via the app to ensure timely replacement and prevent reduced suction.
• If you have multiple floor types, consider using the multi-floor memory feature to save distinct maps for each level.

11. Atilẹyin ọja ati Support

The Lydsto S1 Robot Vacuum Cleaner comes with a 1-odun atilẹyin ọja lati ọjọ rira, ibora awọn abawọn iṣelọpọ ati awọn aiṣedeede labẹ lilo deede.

For technical support, troubleshooting assistance, or warranty claims, please contact our customer service team:

• Whatsapp: + 86 18900786512
• Imeeli: 3509534322@qq.com
• WeChat: + 8618900786512

Please have your product model (S1) and purchase information ready when contacting support.