DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 Gate Door Remote Control

1. Ifihan

This manual provides detailed instructions for the setup, operation, and maintenance of your DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 wireless remote control. This device is designed for convenient and secure operation of DOORHAN gate and garage door openers, utilizing a 433MHz rolling code frequency for enhanced security.

The remote control is available in 2-button and 4-button configurations and is compatible with all DOORHAN models, including TRANSMITTER 2, TRANSMITTER 4, TRANSMITTER -2 PRO, TRANSMITTER -4 PRO, and Premium RC black 4.

Image: DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

2. Package Awọn akoonu

Jọwọ ṣayẹwo package ni pẹkipẹki lati rii daju pe gbogbo awọn nkan wa:

• 1x Remote Control (Battery included)
• 1x English Manual (Quick Guide)
• 1x Lanyard
• 1x Backup Battery
• 1x Blister Box (packaging)

Image: Package contents including remote, quick guide, lanyard, and backup battery.

3. Awọn pato

Image: Dimensions and key specifications of the remote control.

4. Setup (Programming)

To program your new DOORHAN remote control, you will need to pair it with your gate or garage door opener's receiver. The programming procedure is similar to that of original DOORHAN Transmitter 4 remotes. Always refer to your receiver's user manual for specific instructions, as procedures may vary slightly between models. For a typical DOORHAN Garage Control Panel, follow these steps:

1. Press and release the button 'R' on the receiver.
2. The left side of the display panel on the receiver will show '0' and then disappear immediately.
3. Press any button on your new remote control twice. Coding is now completed.
4. Press the transmitter button again to test operation. The gate or garage door should respond.

Akiyesi:

• To remove a single transmitter's code or all transmitter codes from the receiver memory, please refer to your receiver manual.
• Ensure you are within range of the receiver during the programming process.

Image: DOORHAN remote controls, compatible with various models.

5. Awọn ilana Iṣiṣẹ

Once programmed, operating your DOORHAN remote control is straightforward:

• Muu ṣiṣẹ: Press the desired button on the remote control to activate your gate or garage door opener.
• Ibiti: The remote operates within a range of 30-150 meters, depending on environmental conditions and obstacles.
• Awọn Ẹrọ Ọpọ: If you have a 4-button remote and multiple DOORHAN devices (e.g., two garage doors, a gate, and an alarm), you can program each button to control a different device.

Image: Close-up of the 4-button remote control.

6. Itọju

Batiri Rirọpo

The remote control uses a standard coin cell battery (typically CR2032). When the remote's range decreases significantly or it stops responding, it's likely time to replace the battery.

1. Ṣí iṣakoso latọna jijin pẹlu iṣọra casing. Eyi le nilo screwdriver kekere tabi ohun elo prying.
2. Remove the old battery, noting its orientation (positive (+) side up).
3. Insert the new CR2032 battery with the positive (+) side facing up.
4. Ti iṣakoso latọna jijin de casing ni aabo.

Gbogbogbo Itọju

• Keep the remote control dry and away from extreme temperatures.
• Yago fun sisọ isakoṣo latọna jijin silẹ tabi fifisilẹ si awọn ipa to lagbara.
• Fọ àsopọ̀ mọ́tò pẹ̀lú aṣọ gbígbẹ tí ó rọ̀ tí ó sì le koko tí ó bá yẹ. Má ṣe lo àwọn kẹ́míkà líle.

7. Laasigbotitusita

• Latọna jijin ko ṣiṣẹ lẹhin siseto:
  • Ensure the remote's battery is fresh and correctly installed.
  • Repeat the programming steps carefully, ensuring the receiver acknowledges the remote.
  • Check your receiver's manual for any specific programming nuances or error codes.
• Ipin iṣẹ ti o dinku:
  • Rọpo batiri isakoṣo latọna jijin.
  • Check for any new sources of radio interference near your gate/garage door opener.
  • Ensure there are no new large metallic objects obstructing the signal path.
• Latọna jijin ṣiṣẹ ni igba diẹ:
  • This often indicates a low battery. Replace it.
  • Check for loose connections inside the remote if you have opened it previously.

8. Awọn imọran olumulo

Ko si awọn imọran olumulo kan pato ti o wa lati ọdọ alabara tunviews or Q&A for this product. However, general tips for remote controls include:

• Keep a spare battery on hand for quick replacement.
• Store the remote in a consistent, easily accessible location (e.g., car visor clip, key chain) to avoid misplacing it.
• If you have multiple remotes, label them to easily identify which controls which device.

9. Atilẹyin ọja ati Support

For any issues or support inquiries regarding your DOORHAN remote control, please contact the seller or manufacturer directly. Keep your purchase records handy as they may be required for warranty claims or technical assistance.

This product is manufactured by Shenzhen Sarik Technology Co.,Ltd.