SODLK S1117 Outdoor Karaoke Portable Wireless Speaker

1. Ifihan

O ṣeun fun riraasing the SODLK S1117 Portable Wireless Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use to ensure optimal performance and safety.

For a downloadable PDF version of this manual, please refer to the official product page or kiliki ibi.

2. Package Awọn akoonu

Rii daju pe gbogbo awọn nkan wa ninu package:

• Agbọrọsọ Bluetooth × 1
• Okun gbigba agbara × 1
• Afowoyi Olumulo × 1

3. Ọja Ipariview

The SODLK S1117 is a high-power portable wireless speaker designed for outdoor karaoke and home cinema systems, featuring deep bass, 3D surround sound, and Smart DSP technology. It includes multiple playback modes and TWS connection for an immersive audio experience.

3.1 Key Awọn ẹya ara ẹrọ

• 200W output with powerful bass sound.
• Equipped with 4 sound units (2*89MM + 2*58MM drivers).
• 20000mAh battery capacity (3.7V/20000mAh, 14.8V/5000mAh) for extended play time (5-10 hours).
• Bluetooth Version 5.0 for stable wireless connection.
• Multiple playback modes: Bluetooth, U Disk, AUX, TF card.
• TWS (True Wireless Stereo) connection for pairing two speakers for surround sound.
• Built-in MaxxAudio DSP technology for enhanced audio.
• EQ adjustment for customized sound.
• USB charging port functions as a power bank for mobile devices.
• Supports 3.5mm audio port for wired use.
• Supports 6.35mm instrument port.
• OTG Live Streaming Recording support.
• LED lights that pulse to the beat.
• Portable design with a comfortable handle.
• Mabomire ikole.

3.2 Awọn iṣakoso ati awọn ibudo

olusin 1: Top Iṣakoso igbimo
This diagram illustrates the functions of each button on the top panel:

• Power Button (Long press 3s): Tan/pa a.
• Power Button (Short press): Play/pause.
• Mic's Vol+ / Volume + (Short press): Mu iwọn didun pọ si.
• Mic's Vol+ / Volume + (Long press): Next song.
• Mic's Vol- / Volume - (Short press): Din iwọn didun.
• Mic's Vol- / Volume - (Long press): Orin iṣaaju.
• Mode Switch (M): Switch between Bluetooth and AUX mode.
• Bluetooth Cut / TWS Button: Disconnect Bluetooth or initiate TWS pairing.
• Wireless Mic Connect Button: Connect wireless microphone.
• Main Vol / Pause / Factory Reset Knob: Adjust main volume, pause, or perform factory reset.
• Prev Music Button: Go to previous track.
• Next Bọtini Orin: Go to next track.
• Tweeter- / Tweeter+ Buttons: Adjust tweeter level.
• Bass- / Bass+ Buttons: Adjust bass level.
• Imọlẹ Atọka: Shows status (pairing, connected, charging).

Figure 2: Side Panel Ports
This diagram shows the available ports on the side panel:

• Iho TF: For TF card (MicroSD) playback.
• 3.5 Iwọle ohun: For AUX mode connection.
• OTG ni wiwo: For live streaming recording.
• Ti firanṣẹ Gbohungbo Port: For connecting a wired microphone (6.5mm).
• U disk ibudo: For USB drive playback.
• Iru-C gbigba agbara ibudo: Fún gbígbà ohùn agbọ̀rọ̀sọ.

4. Eto

4.1 Gbigba agbara si Agbọrọsọ

1. Connect the provided charging cable to the Type-C charging port on the speaker and a standard 5V charger.
2. The LED indicator will show a red light, indicating that the speaker is charging.
3. The red light will turn off when the speaker is fully charged.

4.2 Bluetooth Asopọ

1. Long press the Power button for 3 seconds to turn on the speaker.
2. The LED indicator will flash blue, indicating the speaker is in pairing mode.
3. On your mobile device, open Bluetooth settings, search for the speaker (usually named "SODLK S1117" or similar), and select it to connect.
4. Once connected, the LED indicator will show a solid blue light. You can now play music and answer calls through the speaker.

4.3 AUX Ipo

1. Connect a 3.5mm audio cable to the 3.5 Audio input port on the speaker and to your audio device.
2. Agbọrọsọ yoo yipada laifọwọyi si ipo AUX.

4.4 Ìsopọ̀ TWS (Stéréó aláilowaya tòótọ́)

To achieve a stereo surround sound experience, you can connect two SODLK S1117 speakers:

1. Ensure both speakers are turned on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), short press the TWS button. It will enter TWS pairing mode.
3. Agbọrọsọ akọkọ yoo wa laifọwọyi ati sopọ si agbọrọsọ keji.
4. Ni kete ti a ti sopọ, awọn agbohunsoke mejeeji yoo mu ohun ṣiṣẹ ni sitẹrio.

5. Awọn ilana Iṣiṣẹ

5.1 ipilẹ Sisisẹsẹhin

• Ṣiṣẹ / Sinmi: Short press the Power button.
• Atunse iwọn didun: Short press Volume + or Volume - buttons.
• Itele/Orin Tẹlẹ: Long press Volume + for next song, long press Volume - for previous song.

5.2 Sound Customization

• Atunse EQ: Use the EQ adjustment feature (if available via dedicated button or knob, refer to Figure 1 for specific controls) to fine-tune the sound profile.
• Bass/Tweeter Adjustment: Use the Bass+ / Bass- and Tweeter+ / Tweeter- buttons to adjust the low and high frequencies.
• Awọn ipo Ohun: The speaker supports various sound modes including Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, and Extra Bass Mode. These can typically be cycled through using a dedicated button or via the connected device.

5.3 Gbohungbohun Lilo

Figure 3: Wireless Microphone Controls
The wireless microphone features:

• Tan-an/pa bọtini
• Volume + / Volume - buttons
• Reverb + / Reverb - buttons

To use the wireless microphone, turn it on and press the 'Wireless Mic Connect' button on the speaker. Adjust volume and reverb directly on the microphone.

For wired microphones, connect to the 6.5mm Wired Mic Port.

5.4 LED imọlẹ

The speaker features LED lights that pulse to the beat of the music. You can typically turn these lights on or off using the 'Turn on/light switch/Reset' button on the control panel (refer to Figure 1).

6. Itọju

• Sọ agbọrọsọ mọ pẹlu asọ asọ ti o gbẹ. Ma ṣe lo abrasive ose tabi epo.
• Jẹ́ kí agbọ́rọ̀sọ náà jìnnà sí ooru tó le koko, oòrùn tààrà, àti àwọn orísun ooru.
• Do not expose the speaker to humid, wet, or dusty environments for prolonged periods.
• Tọju agbohunsoke ni itura, ibi gbigbẹ nigbati o ko ba lo.
• Yago fun sisọ tabi tẹriba agbọrọsọ si awọn ipa to lagbara.

7. Laasigbotitusita

8. Awọn pato

9. Awọn Ikilọ Aabo ati Awọn ilana

9.1 Awọn ikilọ Gbogbogbo

• Risk of fire, explosion, and burns: Ma ṣe tuka, fọ, puncture, awọn olubasọrọ ita kukuru, tabi sọ ọ sinu ina tabi omi.
• Do not expose the product to high temperatures, direct sunlight, or near heat sources.
• Do not use the device if it is damaged, leaking, or abnormal.

9.2 Hearing Damage Warning

• Avoid listening at high volume for long periods of time, which may cause permanent hearing loss.

9.3 Choking Hazard Warning

• Small parts are included. Keep away from children under 3 years old to prevent choking risk.

9.4 Other Safety Notes

• Do not use in humid, wet, or dusty environments.
• Do not use while charging for a long time.
• Stop use immediately if overheating, smoke, or abnormal odor occurs.
• Use only the original charging cable and a standard 5V charger.

10. Atilẹyin ọja ati Support

Ọja yii wa pẹlu atilẹyin ọja 3-osu lati ọjọ rira.

For any technical support, warranty claims, or inquiries, please contact our customer service team:

• Imeeli iṣẹ: laikle2021@yeah.net

Please have your purchase details and product model number (S1117) ready when contacting support.