SKYRC OSH 6-Port 1S Battery Charging Hub

1. Ifihan

The SKYRC OSH 6-Port 1S Battery Charging Hub is designed to efficiently and safely charge up to six 1S micro LiPo, LiFe, Li-ion, or LiHV battery packs simultaneously. It serves as a perfect companion to your SKYRC B6neo series chargers, including B6neo, B6ACneo, B6neo+, and B6neo 2. This hub offers compatibility with both PH2.0 and BT2.0 battery plugs, providing versatility for various micro 1S fleets.

2. Alaye Aabo

• Always use the charging hub with compatible SKYRC B6neo series chargers.
• Ensure correct battery polarity when connecting batteries to the hub.
• Do not attempt to charge damaged or swollen batteries.
• Maṣe fi awọn batiri gbigba agbara silẹ laini abojuto.
• Keep the charging hub away from flammable materials and liquids.
• Operate within the specified working temperature and humidity ranges.
• Tọju ẹrọ naa ni itura, aye gbigbẹ, kuro lati orun taara ati awọn iwọn otutu to gaju.

3. Package Awọn akoonu

• 1 x SKYRC OSH 6-Port 1S Battery Charging Hub (PH2.0 or BT2.0 version, depending on selection)

4. Ọja Ipariview

The OSH 6-Port 1S Lithium Battery Charging Hub is a compact and efficient device designed for micro 1S batteries. It features six individual charging ports and is available in two main versions: one with PH2.0 connectors and another with BT2.0 connectors, catering to different battery types commonly used in FPV racing and micro drones.

Awọn ẹya:

• 6-Port 1S LiPo Charging Hub.
• Charges up to six micro LiPo packs safely and efficiently.
• Available with PH2.0 or BT2.0 plugs for broad compatibility.
• Supports SKYRC B6neo, B6ACneo, B6neo+, and B6neo 2 chargers.
• Compatible with LiPo, LiFe, Li-ion, and LiHV battery types.

5. Eto

1. Sopọ si Ṣaja: Plug the main XT60 connector of the OSH Charging Hub into the output port of your compatible SKYRC B6neo series charger.
2. Yan Iru Batiri: On your B6neo series charger, select the appropriate battery type (LiPo, LiFe, Li-ion, or LiHV) and charging parameters (e.g., 1S, desired current).
3. Insert Jumper Cap: The hub includes a jumper cap. Insert this cap into the corresponding pins (labeled 1-6) to indicate which battery cells are connected and to be charged. Ensure the jumper cap is correctly placed for the number of batteries you intend to charge. For example, if charging 3 batteries, place the jumper cap across pins 1-3.
4. Awọn batiri Sopọ: Carefully plug your 1S batteries into the PH2.0 or BT2.0 ports on the charging hub. Ensure the connectors match and are inserted firmly.

6. Awọn ilana Iṣiṣẹ

1. After completing the setup steps, double-check all connections and settings on your main charger.
2. Initiate the charging process on your SKYRC B6neo series charger. The hub will distribute the charging current to all connected batteries.
3. Monitor the charging progress on your main charger's display. The hub allows for efficient parallel charging of up to six 1S batteries.
4. Once charging is complete, the main charger will indicate the end of the cycle. Disconnect the batteries from the hub, and then disconnect the hub from the charger.

7. Awọn imọran olumulo

• Always ensure all batteries connected to the hub are of the same cell count (1S) and similar voltage levels to ensure balanced and safe charging.
• For optimal charging speed and safety, use a charging current appropriate for the total capacity of the batteries being charged. A common guideline is to charge at 1C (e.g., for six 300mAh batteries, a total of 1.8A).
• Regularly inspect the connectors on both the hub and your batteries for any signs of wear or damage.
• If you notice any unusual heat, smoke, or swelling from a battery during charging, immediately disconnect it and move it to a safe, non-flammable area.

8. Itọju

• Keep the charging hub clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Yago fun ṣiṣafihan ẹrọ naa si ọrinrin tabi awọn iwọn otutu to gaju.
• Periodically check all connectors for corrosion or damage. Replace if necessary.
• Store the hub in a protective case or bag when not in use to prevent physical damage.

9. Laasigbotitusita

• Awọn batiri ti ko gba agbara: Ensure the hub is correctly connected to a compatible charger. Verify the jumper cap is properly inserted. Check if the batteries are correctly plugged into the hub and are not damaged. Confirm the charger settings are correct for 1S batteries.
• Gbigba agbara lọra: Ensure your main charger is set to an adequate output current for the number of batteries connected. Check for any loose connections.
• Ipele tabi awọn batiri ti n gbona pupọju: Immediately stop charging. Disconnect all components. This could indicate a short circuit, damaged battery, or incorrect settings. Review all connections and battery conditions before attempting to charge again.

10. Awọn pato

11. Atilẹyin ọja ati Support

This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or service inquiries, please contact the retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.