Ọrọ Iṣaaju
The NEEWER BASICS A10L is a compact and lightweight 2-in-1 camera flash and LED video light designed for photographers and content creators. It offers a guide number of 10 for flash photography and a 2W LED light with adjustable color temperature and brightness for continuous illumination. Its simple, plug-and-play design makes it suitable for various standard hot shoe cameras, providing enhanced lighting for both indoor and outdoor shooting scenarios.
Ṣeto
Package Awọn akoonu
Ṣaaju ki o to bẹrẹ, rii daju pe gbogbo awọn nkan wa ninu package:
- 1 x Mini Camera Flash (A10L)
- 1 x Diffuser
- 1 x USB A si okun USB C
Ngba agbara si Batiri naa
The A10L features a built-in 800mAh rechargeable lithium battery. Before first use, fully charge the device using the provided USB A to USB C cable.
- Connect the USB-C end of the cable to the charging port on the flash unit.
- Connect the USB-A end to a compatible USB power adapter (not included) or a computer USB port.
- The charging indicator will show the charging status (e.g., red for charging, green for fully charged).
Fifi sori Kamẹra
The A10L is designed for standard single contact hot shoe cameras.
- Rii daju pe kamẹra rẹ ti wa ni pipa.
- Slide the A10L's hot shoe mount into your camera's hot shoe slot.
- Tighten the locking ring or lever on the flash unit to secure it in place.
Awọn akọsilẹ ibamu:
- Compatible with Canon, Nikon, Sony (ZV1, A7iii), Fujifilm (Fuji), Pentax, and Olympus cameras with standard hot shoes.
- NOT compatible with: Sony ZV-1F, A9III, A99, A77, A350.
- NOT compatible with: Canon EOS Rebel SL3, 250D, T7, 1500D, 2000D, T100, 3000D, 4000D, 200DII, R7, R6II, R8, R10, R50.
- NOT compatible with: Fuji X-A3, X100F, X100T.
- The A10L speedlight does not support TTL (Through The Lens) or camera menu setting functions. It operates in Manual (M) mode only.
Awọn ilana Iṣiṣẹ
Titan / Paa
Locate the power switch on the side of the flash unit. Slide it to the "ON" position to power on, and "OFF" to power off.
Flash Mode (Manual)
The A10L operates exclusively in Manual (M) flash mode. You will need to set the flash power manually.
- Press the "M/Q" button to cycle through flash power levels: 1/1 (full power), 1/2, 1/4, 1/8.
- The selected power level will be indicated by LEDs on the unit.
- After firing, the flash has a recycling time of 0.5-3.5 seconds before it's ready for the next shot.
LED Video Light Mode
The A10L can also function as a continuous LED video light. Note that the flash and the LED fill light cannot be used simultaneously.
- To activate the LED light, press the dedicated LED light button (often labeled with a light bulb icon).
- Ṣiṣatunṣe Imọlẹ: Press the brightness adjustment button (often labeled with +/- or similar) to cycle through 4 dimming levels.
- Ṣatunṣe Iwọn otutu Awọ: Press the color temperature adjustment button (often labeled with a Kelvin symbol or C/T) to cycle through 4 color temperature settings: 2700K, 4500K, 6000K, and 7500K.
Lilo Diffuser
Attach the included diffuser to the front of the flash head to soften the light output, creating more even and natural lighting for portraits and close-up shots.
Itoju
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu ìta ẹ̀rọ fìlà náà. Fún èérí líle, a lè fi díẹ̀ sí i.amp A le lo aṣọ, lẹ́yìn náà a le gbẹ ẹ lẹ́sẹ̀kẹsẹ̀. Má ṣe lo àwọn kẹ́míkà líle tàbí àwọn ohun ìfọmọ́ tí ó máa ń pa ara.
- Itọju Batiri: To prolong battery life, avoid fully discharging the battery frequently. If storing the unit for an extended period, charge it to approximately 50% and recharge every 3-6 months.
- Ibi ipamọ: Store the flash unit in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Keep it away from dust and moisture.
- Hot Shoe Contacts: Periodically inspect the hot shoe contacts for dirt or corrosion. Clean gently with a dry, soft cloth if necessary.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Flash ko n yinbọn |
|
|
| Imọlẹ fidio LED ko ṣiṣẹ |
|
|
| Poor flash output/uneven lighting |
|
|
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | A10L |
| Nkan Iru | Camera Flash with Video Light |
| Ohun elo akọkọ | Ṣiṣu |
| Àwọ̀ | Dudu |
| Nọ́mbà Ìtọ́sọ́nà (GN) | 10 (ISO 100, meters) |
| Ipo Flash | M (Afọwọṣe) |
| Flash Power Awọn ipele | 4 (1/1, 1/2, 1/4, 1/8) |
| Flash Times (Full Power) | Titi di 550 |
| Akoko atunlo | 0.5-3.5-orundun |
| Agbara Batiri ti a ṣe sinu | DC 3.7V 800mAh |
| LED Video Light Power | 2W |
| Awọn Ipele Imọlẹ LED | 4 |
| LED opoiye | 14 Warm + 14 Cool |
| Color Temperature (LED) | 2700K, 4500K, 6000K, 7500K |
| CRI | 95+ |
| Awọn iwọn (WxHxD) | 3.86"x2.68"x1.26" / 9.8x6.8x3.2cm |
| Iwọn | 3.88oz / 110g |
| Ibamu | For Cameras with Standard Hot Shoe (Canon, Nikon, Sony, Fujifilm, Pentax, Olympus) |
| Ohun elo | Portrait/Close-up Shots, Low Light Environments |
| Ijẹrisi | RoHS |
Awọn imọran Olumulo
- For optimal flash results, especially when using the diffuser, ensure your subject is within 3 meters (approximately 10 feet) of the flash unit.
- Experiment with different flash power levels (1/1 to 1/8) to achieve the desired exposure and light intensity for your specific shooting conditions.
- Utilize the LED video light's adjustable color temperatures to match ambient lighting or create specific moods in your videos and photos.
- Always ensure the battery is sufficiently charged before a shoot to avoid interruptions. The Type-C charging allows for convenient power replenishment.
Atilẹyin ọja ati Support
This NEEWER product is covered by a 1-year limited warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact NEEWER customer service through their official webaaye tabi alagbata ti o ti ra ọja naa.
