1. Ifihan
Welcome to the user manual for your new HASWING Cayman-B/GPS Electric Trolling Motor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your trolling motor. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Alaye Aabo
Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lati yago fun ipalara tabi ibajẹ ọja naa:
- Ka ati loye gbogbo awọn ilana ṣaaju ṣiṣe moto naa.
- Ensure the motor is securely mounted to the boat's bow before use.
- Keep hands, feet, and clothing clear of the propeller at all times, especially when the motor is in operation.
- Disconnect power to the motor before performing any maintenance, cleaning, or propeller inspection.
- Use only the recommended battery type (2 x 105AH Deep Cycle Battery) and ensure correct polarity when connecting.
- Ma ṣe ṣiṣẹ mọto ti o ba ti bajẹ tabi dina.
- Avoid operating the motor in shallow water where debris could damage the propeller or motor unit.
- Always wear a personal flotation device (PFD) when on the water.
- Do not allow children to operate the motor without adult supervision.
3. Ọja irinše
Your HASWING Cayman-B/GPS Trolling Motor package typically includes:
- Trolling Motor Unit (with shaft, propeller, and motor head)
- Alailowaya isakoṣo latọna jijin
- Iṣagbesori Awo ati Hardware
- Power Cables (pre-installed or included for connection)
- Afowoyi Olumulo (iwe-ipamọ yii)
4. Fifi sori ẹrọ ati Oṣo
4.1 Iṣagbesori Motor
- Choose a suitable location on the bow of your boat for mounting. Ensure the motor can be fully deployed and stowed without obstruction.
- Position the mounting plate and mark the drilling points.
- Drill the necessary holes and secure the mounting plate using the provided hardware.
- Attach the trolling motor unit to the mounting plate. Ensure it is firmly secured to prevent movement during operation.
4.2 batiri Asopọ
This motor requires a 24V power supply. It is recommended to use two 105AH deep cycle batteries (not included) connected in series.
- Ensure both batteries are fully charged before connection.
- Connect the positive terminal of the first battery to the negative terminal of the second battery (series connection).
- Connect the positive lead from the trolling motor to the remaining positive terminal of the battery bank.
- Connect the negative lead from the trolling motor to the remaining negative terminal of the battery bank.
- Ṣàyẹ̀wò gbogbo àwọn ìsopọ̀ lẹ́ẹ̀mejì fún wíwà ní ìdúró àti ìdúró tó tọ́.
4.3 Sisopọ Iṣakoso latọna jijin
Refer to the specific instructions included with your remote control for pairing procedures. Typically, this involves powering on the motor and pressing a pairing button on both the motor head and the remote control within a short timeframe.
4.4 Atunse Ijinle
The motor features a depth collar for easy adjustment of the propeller's depth in the water. Loosen the collar, adjust the shaft to the desired depth, and then tighten the collar securely.
5. Isẹ
5.1 Titan / Pa a
To power on the motor, ensure it is connected to the battery and press the power button on the motor head or remote control. To power off, press the power button again.
5.2 Lilo isakoṣo latọna jijin
The wireless remote control provides convenient operation of your trolling motor:
- Iṣakoso iyara: Use the speed adjustment buttons to increase or decrease motor thrust. The motor features stepless speed control for precise adjustments.
- Itọnisọna: Use the left/right steering buttons to control the motor's direction (360° electric control).
- Anchor Button (GPS): Activates the GPS anchor function, holding your boat's position.
- Cruise Control (GPS): Engages cruise control to maintain a set speed and direction.
6. Itọju
- Lẹhin lilo kọọkan: Rinse the motor unit with fresh water, especially after use in saltwater, to prevent corrosion. Wipe down all surfaces.
- Ayewo Propeller: Regularly check the propeller for fishing lines, weeds, or other debris. Remove any obstructions carefully. Inspect for damage (chips, cracks) and replace if necessary.
- Itọju Batiri: Keep batteries charged when not in use. Store batteries in a cool, dry place.
- Awọn isopọ: Periodically check all electrical connections for corrosion or looseness. Clean and tighten as needed.
- Ibi ipamọ: When storing the motor for extended periods, ensure it is clean, dry, and disconnected from the battery.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Mọto ko ni tan. | No power, loose battery connection, dead battery, blown fuse. | Check battery connections, ensure batteries are charged, check for blown fuses. |
| Motor runs but with reduced power. | Low battery charge, propeller fouled with debris, damaged propeller. | Recharge batteries, clear propeller of debris, inspect and replace damaged propeller. |
| Isakoṣo latọna jijin ko dahun. | Remote battery dead, remote not paired, interference. | Replace remote control batteries, re-pair the remote, move away from sources of interference. |
| Motor mu dani ariwo. | Propeller damaged or loose, debris in motor housing. | Inspect propeller for damage or looseness, check for debris around the motor. |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | HASWING |
| Nọmba awoṣe | 50739-152 |
| Ipò Ẹ̀rọ | Ti ita |
| Iru | Fishing engine |
| Voltage - Rated/Max | DC 24V |
| Power - Rated / Max | 1080W |
| Amp - Rated / Max | 45A |
| Ti o pọju Titari | 80 Lbs (3HP equivalent) |
| Prop Type/Size | 2 blade prop / 11.4 inch diameter |
| Prop Speed at full power | Max. 1500 rpm underwater |
| Decibel level (Db) | ≤50db |
| Ọpa Iru | Irin ti ko njepata |
| Ipari Ọpa | 1520mm |
| Lapapọ Giga | 1830mm |
| Atunse Ijinle | Kola ijinle |
| Itọnisọna | 360° Electric Control |
| Iṣakoso Iru | Isakoṣo latọna jijin |
| Iwakọ Iru | One-Way, Stepless Speed |
| Iwọn mabomire | IP65 |
| Motor Iru | Fẹlẹ Motor |
| Battery Type (Suggestion) | 2 X 105AH Deep Cycle Battery (not included) |
| Max Boat Length (Suggestion) | 6.5m |
| Awọn iwọn (L x W x H) | 300 x 1520 x 280 mm |
| Ìwúwo (NW) | 15.1KG |
| Ipilẹṣẹ | Orile-ede China (Guangdong, China) |
| Kemikali ti o ni ifiyesi giga | Ko si |
| Ipo | Tuntun |
9. Awọn imọran olumulo
- Always ensure your batteries are fully charged before heading out, especially when planning to use GPS features like Anchor Mode extensively.
- Familiarize yourself with the remote control functions in a calm, open water area before using it in critical fishing situations.
- Consider installing a quick-release mounting bracket for easier removal and storage of the trolling motor when not in use or for transport.
- For optimal performance and battery life, avoid running the motor at maximum thrust for prolonged periods unless necessary.
- Keep a spare set of batteries for the remote control on board.
10. Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please contact your authorized HASWING dealer or the point of purchase. Keep your purchase receipt as proof of purchase for any warranty claims.
