BAJETON Walkie Talkie Headphone User Manual

1. Apejuwe ọja

This universal intercom headset is designed for hands-free communication with most standard handheld intercom devices. It features a lightweight, ergonomic design with soft ear cushions for comfortable long-term wear, and a high-sensitivity microphone for clear voice transmission. Equipped with compatible connectors (3.5mm audio jack/2-pin connector), it is suitable for various scenarios such as security patrols, construction sites, logistics, and outdoor activities, enabling convenient and clear communication without holding the intercom.

The G-shape earpiece and 360-degree rotatable earplug ensure a comfortable fit and allow free switching between left and right ears, adapting to various usage scenarios. The large PTT (Push-To-Talk) button enables one-click calling, freeing your hands, while the high-definition microphone ensures clear and convenient communication. A 360-degree rotatable metal clip on the PTT unit allows for angle adjustment according to user needs.

2. Package Awọn akoonu

Apo naa pẹlu:

• 1 or 2 x Walkie Talkie Headphone (depending on variant purchased)

3. Key Awọn ẹya ara ẹrọ

• G-shape Earpiece: Ergonomic design for comfortable fit.
• 360° Rotatable Earplug: Allows free switching between left and right ears.
• Large PTT Button: For easy, one-click call transmission.
• High-definition Microphone: Built-in for clear communication with noise reduction.
• 360° Rotation Metal Clip: On the PTT unit for adjustable positioning.
• Waterproof Plug Design: Ensures durability and reliable connection.
• Ibamu: Designed for BAJETON BJ-9000, Radtel RT-950, RT-950PRO radios.

4. Awọn ilana iṣeto

1. Inspect Headset: Before use, power off your intercom device and check the headset for any damage (e.g., frayed cables, broken earpieces, faulty microphones). Do not use if damaged.
2. So Agbekọri pọ: Connect the headset connector to the corresponding audio/microphone port on your intercom. Ensure a firm connection to avoid sound distortion or signal loss.
3. Wọ Agbekọri: Wear the headset on your head or over the designated ear (for single-ear models), adjusting the headband or ear hook to fit snugly but comfortably.
4. Gbohungbohun ipo: Ensure the microphone is positioned 2-3cm away from your mouth for optimal sound quality.

5. Awọn ilana Iṣiṣẹ

5. Agbara Tan & Idanwo: Power on the intercom and test the communication. Adjust the intercom's volume level to a comfortable range to avoid hearing damage.
6. Ibaraẹnisọrọ: Press the large PTT button on the headset to transmit your voice. Release the button to listen.
7. Lẹhin Lilo: After use, power off the intercom first, then gently disconnect the headset from the device.

6. Itọju & Itọju

Proper maintenance extends the service life of the headset:

• Ninu: Clean the ear cushions regularly with a soft, damp cloth and mild detergent. Allow them to air-dry completely before use to prevent bacterial growth.
• Iṣakoso USB: Avoid tangling the cable. When storing, wrap the cable gently and avoid tight bends at the connector ends.
• Ayewo: Check the cable and connectors regularly for wear or damage. Replace the headset if the cable is frayed or the connector is loose.
• Ibi ipamọ: Store the headset in a dry, cool, dust-free place when not in use. Avoid direct sunlight to prevent fading and material aging.

7. Laasigbotitusita

If you experience issues with your headset, consider the following:

• Kò sí Ohùn/Ìyípadà: Ensure the headset connector is firmly seated in the intercom's audio/microphone port. Check for any visible damage to the cable or connectors.
• Awọn ọrọ gbohungbohun: Verify the microphone is positioned 2-3cm from your mouth. Check for cable damage near the microphone.
• Asopọmọra Laarin: Ensure the plug is fully inserted and not loose. Avoid excessive pulling or twisting of the cable.
• Poor Sound Quality/Unusual Noises: Stop using the headset immediately. Check for cable damage or loose connections. If the issue persists, the headset may be faulty.

8. Awọn pato

9. Warning / Safety Information

Warning: To ensure personal safety and product integrity, read and strictly follow these safety instructions.

• Ipele Iwọn: Do not set the volume to an excessively high level. Prolonged exposure to loud sounds may cause permanent hearing damage.
• Ewu Gbigbọn: Keep the headset away from children under 3 years old. Small parts (such as ear cushions, connectors) may pose a choking hazard if detached.
• Imoye ipo: Do not use the headset while driving or operating heavy machinery if it impairs your ability to hear surrounding sounds. This may lead to accidents.
• Ibajẹ ọja: Do not expose the headset to high temperatures (above 60°C), open flames, or corrosive liquids (acid, alkali, oil), as this may damage the cable, ear cushions, or internal components.
• Iduroṣinṣin USB: Do not pull, twist, or bend the headset cable excessively. This may cause internal wire breakage, leading to sound loss or microphone failure.
• Lilo Ayika: Do not use the headset in wet environments (e.g., heavy rain, humid workshops) without waterproof protection, as this may cause short circuits or component damage.
• Iyipada Laigba aṣẹ: Do not disassemble, modify, or repair the headset without authorization. Unauthorized operations will damage the product and void any warranty.
• Noisy Environments: Avoid using the headset in extremely noisy environments without noise-canceling support, as this may affect communication clarity and require excessive volume adjustment.

10. Compliance Mark & Standards

CE Samisi

Conforms to the requirements of the European Union's Low Voltage Directive (2014/35/EU) and EMC Directive (2014/30/EU). The CE mark is affixed to the headset's cable connector or earpiece housing, ensuring clear visibility.

Applicable Regulations & Harmonized Standards

This product complies with the following European Union regulations and harmonized standards:

• Regulation (EU) 2019/2028 (PEACH): Restrictions on certain hazardous substances in consumer products.
• EN 55032:2015+A11:2020: Electromagnetic compatibility of multimedia equipment - Emission requirements.
• EN 60950-1:2006+A11:2009: Safety of information technology equipment, including electrical business equipment.
• EN 50332-1:2013: Sound system equipment - Part 1: Maximum sound pressure level measurement method and limit values.

11. Awọn imọran olumulo

Ko si kan pato olumulo awọn italolobo wà wa lati tunviews or Q&A for this product at this time. Always refer to the main instructions for optimal use.

12. Atilẹyin ọja ati Support

For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.