1. Ifihan
This manual provides essential information for the proper installation, maintenance, and understanding of your new H14 HEPA replacement filter. This filter is designed to be compatible with AIRFIRE AP304 and JOWSET AP303/AP304 air purifiers, ensuring optimal air quality in your home or office. Please read these instructions carefully before replacing your filter.
2. Ọja Ipariview
The H14 True HEPA replacement filter is engineered to provide superior air purification. It features a multi-layer filtration system designed to capture a wide range of airborne pollutants, making it ideal for environments with children, pets, or allergy sufferers.
2.1 Awọn ẹya pataki:
- Asẹ HEPA Tòótọ H14: Captures 99.997% of particles as small as 0.1 microns, including dust, smoke particles, pollen, and pet dander. This is up to 10 times more effective than ordinary HEPA 13 filters.
- Multi-Layer Design: Incorporates a Net Filter, Pre-Filter Layer, H14 True HEPA Layer, and an Activated Carbon Layer for comprehensive purification.
- Layer Erogba ti a mu ṣiṣẹ: Effectively removes smoke, odors, fumes, and Volatile Organic Compounds (VOCs).
- Fọ́ọ́lù Ṣáájú Àlẹ̀mọ́: Traps larger particles such as dust, lint, fibers, and pet hair.
- Double Filters Filtration System: Utilizes two HEPA 14 filters working simultaneously to effectively capture pollutants from all directions, covering areas up to 3000 sq ft.
- Ibamu: Specifically designed for AIRFIRE AP304 and JOWSET AP303/AP304 air purifier models.
3. Awọn pato
| Iwa | Iye |
|---|---|
| Ibamu Nọmba Awoṣe | For AIRFIRE AP304 and JOWSET AP303/AP304 |
| Iru | Air Purifier Parts (H14 HEPA Filter) |
| Iṣẹ ṣiṣe sisẹ | 99.997% removal of particles down to 0.1 microns |
| Àlẹmọ Layer | Net Filter, Pre-Filter, H14 True HEPA, Activated Carbon |
| Itanna | Rara |
| Kemikali ti o ni ifiyesi giga | Ko si |
| Ipilẹṣẹ | Orile-ede China |
| Filter Dimensions (H x W x D) | 30 cm (11.81 in) x 25.5 cm (10.04 in) x 3 cm (1.18 in) |
| Idiwon Iwọn (L x W x H) | 32 cm x 28 cm x 9 cm |
| Package iwuwo | 1.066 kg |
4. Fifi sori (Iyipada Ajọ)
Follow these steps to replace the filter in your AIRFIRE AP304 or JOWSET AP303/AP304 air purifier:
- Ṣetan Ẹrọ naa: Turn off the air purifier and unplug the power cord from the electrical outlet. The power cord is typically located on the right side of the device.
- Wọlé sí Ẹ̀ka Àlẹ̀mọ́: Open the purifier cover. This usually involves releasing it from notches or latches on both sides of the device. Carefully remove the old filter.
- Fi Ajọ Tuntun sori ẹrọ: Remove the new filter from its protective plastic bag. Install the new filter into the compartment. Ensure the side marked with "FRONT" is facing inward, and the active carbon layer faces outward, as indicated by the purifier's design.
- Atọka Ajọ Tunto: Close the purifier cover securely. Plug the power cord back in. Press and hold the HEPA button on the control panel until you hear a beep. This action resets the filter indicator, signaling that a new filter has been installed.
5. Itọju
5.1 Filter Replacement Frequency:
For optimal performance and air quality, it is recommended to replace the H14 HEPA filter every 4 to 6 months. This duration may vary depending on usage intensity and air quality in your environment.
5.2 Gbogboogbo Ninu:
- Do not wash or rinse the HEPA filter. Water can damage the filter media and reduce its effectiveness.
- The exterior of the air purifier can be wiped clean with a soft, dry cloth.
- Regularly check the pre-filter layer for excessive build-up of dust and debris. While the filter itself should not be washed, you can gently vacuum the exterior of the pre-filter if accessible and recommended by your air purifier's manual.
6. Laasigbotitusita
6.1 Air Quality Not Improving:
- Ṣàyẹ̀wò fífi Àlẹ̀mọ́lẹ̀ sílẹ̀: Ensure the filter is correctly installed and seated properly in the air purifier. Refer to Section 4.
- Aye àlẹmọ: Verify if it's time to replace the filter. Even if the indicator light is off, heavy usage or poor air quality can shorten filter life.
- Isẹ ẹrọ: Ensure the air purifier itself is functioning correctly according to its own instruction manual.
6.2 Filter Indicator Light Remains On After Replacement:
- Ilana Tunto: Make sure you have followed the filter reset procedure correctly (Step 4 in Section 4). Press and hold the HEPA button until you hear a beep.
- Yiyipo Agbara: Unplug the air purifier for a few minutes, then plug it back in and attempt the reset procedure again.
7. Awọn imọran olumulo
- Awọn iṣayẹwo deede: Periodically check the filter's condition, especially if you notice a decrease in air purifier performance or an increase in odors.
- Iṣura: Consider keeping a spare filter on hand to ensure continuous clean air, especially if you live in an area with high pollution or have pets.
- Ibi to dara julọ: Ensure your air purifier is placed in an area that allows for unrestricted airflow to maximize the filter's effectiveness.
8. Atilẹyin ọja ati Support
This replacement filter is designed for durability and performance. For any questions regarding the product, compatibility, or performance issues, please contact the seller or manufacturer directly. Please refer to your original air purifier's manual for specific warranty information related to the device itself.
