GTMEDIA V7 S2X Satellite HD Receiver User Manual

Ọrọ Iṣaaju

This user manual provides comprehensive instructions for the GTMEDIA V7 S2X Satellite HD Receiver. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. Keep this manual for future reference.

The GTMEDIA V7 S2X is a high-definition satellite receiver supporting DVB-S/S2/S2X standards, offering 1080P output, USB WiFi connectivity, and various advanced features for an enhanced viewiriri iriri.

Awọn Itọsọna Aabo

This Set-Top Box (STB) has been manufactured to satisfy international safety standards. Please read the following safety precautions carefully.

Gbogbogbo Abo

• Ipese akọkọ: Operate the unit only under the power source specified in "Specifications" (100-240V AC 50/60Hz).
• Apọju: Do not overload wall outlets, extension cords, or adapters to prevent fire or electric shock.
• OMI: Keep liquids away from the STB. Do not expose the apparatus to dripping or splashing, and do not place objects filled with liquids (e.g., vases) on the apparatus.
• IKILO: Disconnect the STB from the wall outlet before cleaning. Use a lightly damp asọ (ko si olomi) lati eruku STB.
• OHUN INU: Ensure the slots on top of the STB are uncovered for proper airflow. Do not place the STB on soft furnishings or carpets, expose it to direct sunlight, or near a heater. Do not stack electronic equipment on top of the STB.
• Asomọ: Do not use any attachments not recommended by the manufacturer, as they may cause hazard or damage.
• IBI: Place the STB indoors to protect it from lightning, rain, or direct sunlight.

Aabo Asopọmọra

• CONNECTION TO THE SATELLITE DISH LNB: Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the LNB.
• CONNECTION TO THE TV: Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the TV.
• ILE: The LNB cable MUST BE EARTHED to the system earth for the satellite dish. Unplug the apparatus during lightning storms or when unused for long periods.

Idasonu ọja

Sisọ ọja yii titọ: This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. Environment Temperature: 0~35°C.

Ọja Pariview ati Awọn ẹya ara ẹrọ

The GTMEDIA V7 S2X is a versatile satellite HD receiver designed for a superior viewing experience. It supports various DVB standards and offers a range of functionalities.

Awọn ẹya pataki:

• High Definition STB decoder, Full HD 1080P output via HD.
• Under 1 Watt Standby power consumption.
• SCPC and MCPC receivable from C/KU band satellite.
• DiSEqC 1.0, 1.1, 1.2, SUALS and Unicable supported.
• 2*USB 2.0 Host, USB-WIFI and 3G dongle supported.
• Video Decoding: MPEG-4, MP@ML, MP@HL, MP@4.1, XVID, DIVX.
• Audio Decoding: LPCM, AAC-LC, HE-AAC, MP3, Dolby.
• Automatic PAL/NTSC conversion.
• 6000+ channel (TV and Radio) programs.
• 16 different favorite groups selection.
• Electronic Program Guide (EPG).
• Subtitle supported.
• Teletext supported by VBI insertion and software emulation.
• PVR Ready, Recording and Time Shift.
• Auto scan, Fast scan and LCN function.
• Parental lock facility by channel and program event.
• Multilingual menu text supported.
• Software upgrade via USB, and RS232.
• Support DVB-S/S2/S2X, AVS+, VCM/ACM/multi-stream/T2MI /PLS.
• Support BISS auto roll, Full PowerVu, DRE & Biss key.
• Support Unicable, DiSEqC1.0/1.1/1.2/USALS Motor fully support.
• Support Full speed USB 3/4G dongle and USB wifi dongle.
• Support Online Movie.
• Support Cccam, Newcam.

DVB Functionality:

• DVB-S/S2/S2X, H.264 (V7S2X Support)
• DVB-S/S2/S2X, DVB-T/T2, H.265, CA Card (V7Pro Support)

Note: Specifications are subject to change without further notice. The manufacturer does not assume responsibility for errors or mistakes in printing. New software may change features. The image shown is indicative only; the actual product may differ.

Package Awọn akoonu

Jọwọ ṣayẹwo apoti fun awọn nkan wọnyi:

• 1 * GTMEDIA V7 S2X Device
• 1 * HD cable
• 1 * Isakoṣo latọna jijin
• 1 * USB WIFI adapter
• 1 * Power Supply
• 1 * Itọsọna olumulo

Warm reminder: We only sell devices and our device do not include any testing and subscription services. We do not offer any testing and subscription services.

Eto Itọsọna

Awọn aworan atọka asopọ

Follow the diagrams below for connecting your GTMEDIA V7 S2X receiver to your television and satellite antenna.

Figure 1: GTMEDIA V7 S2X Connection Diagram. This diagram illustrates how to connect the V7 S2X receiver to a TV and satellite dish. Connections include LNB IN (from satellite dish), HD OUT (to TV), CVBS (to TV), L/R audio (to TV), USB (for WiFi/storage), and DC 12V (power adapter). The TV is shown connected via HD OUT and AV Cable (CVBS, L, R). A USB WiFi adapter is shown connected to the USB port, and the power adapter to DC 12V. A satellite dish is connected to LNB IN.

Nsopọ si TV

There are two primary ways to connect your receiver to your TV:

1. AV Connection (Red/White/Yellow cables):
   • Connect the AV cable (red, white, yellow) from the receiver's AV output interface to your TV's AV input interface.
   • Ensure cables are connected color-to-color (Red to Red, White to White, Yellow to Yellow).
   • Set your TV to the AV input mode.
2. HD OUT Connection (HDMI cable):
   • Connect an HD cable from the receiver's HD OUT port to an available HDMI input on your TV.
   • Set your TV to the corresponding HD input mode (e.g., HDMI 1, HDMI 2).

Connecting to Satellite Dish

Connect the LNB cable from your satellite dish to the "LNB IN" port on the back of the GTMEDIA V7 S2X receiver. Ensure the STB is disconnected from the mains before making this connection.

Asopọ agbara

Connect the provided power adapter to the "DC 12V" port on the receiver, then plug the adapter into a wall outlet.

USB WiFi Connection

Insert the provided USB WiFi adapter into one of the USB 2.0 Host ports on the receiver to enable wireless network connectivity.

Isẹ Guide

Awọn iṣẹ iṣakoso latọna jijin

The remote control allows you to power on/off the receiver, navigate menus, and access various functions. The image below shows the remote control layout and key functions.

Àwòrán 2: Ìṣètò Ìṣàkóso Láàrin Ọ̀nà. This image displays the remote control for the GTMEDIA V7 S2X, highlighting various buttons for power, channel selection, volume, menu navigation, and special functions like PVR and Time Shift.

Awọn iṣẹ bọtini:

• AGBARA: Standby On/Off.
• 0-9 Awọn bọtini: Lo lati yan awọn ikanni tabi tẹ awọn paramita siseto.
• ÌRÁNTÍ: Pada si ikanni iṣaaju.
• TV/RAD: Switches receiver between TV and Radio mode.
• Akojọ: Displays the Main Menu on the screen, or returns to the previous menu or status. When DVB is started, press continuously to enter the forced upgrade mode.
• JADE: Cancels the user selection and returns to the viewing mode lati kan akojọ.
• O DARA: Selects menu option, or to update on entry.
• VOL +/-: Adjusts volume level, or moves cursor left or right in the menu.
• CH +/-: Changes channels, or moves cursor up or down in the menu.
• SAT: Displays the satellite list at normal picture, or switches satellites.
• FAV: Sets receiver to favorite server mode, displays the favorite channel.
• PAGE +/-: Moves the cursor to the next or previous page in the channel list.
• YouTube: Quick access to YouTube list.
• DÁKÚN: Pa ohun naa di.
• OHUN: Audio channel setup: Left, Right, Stereo, and Mono.
• ALAYE: Displays channel status or various program information of current service.
• EPG: Displays the program guide on screen when available.
• ORUN: Sets the Standby time.
• S.MODE: Switches output resolution.
• TV MODE: (Menu Mode) Switches TV mode between PAL or NTSC.
• WA: Prompts to find channels sorted by character.
• Ọrọ: Shows teletext information if supported by the current channel.
• SUBT: Subtitle Display.
• ►II (Play/Pause): Sisisẹsẹhin multimedia ati idaduro.
• DURO: Stops Time Shift, recording, or MP3/JPEG player.
• • REC: Records the currently playing program. Press again to set the duration of recording.
• M/P (Red Key): Multifunction key.
• VIDEO (Green Key): Quick access to custom Video list (Multifunction key).
• PVR LIST (Yellow Key): Quick access to PVR LIST (Multifunction key).
• TIMER (Blue Key): Displays Time Shift info bar (Multifunction key).

Remote Control Learning Function (Control TV)

The remote control has a learning function to control your TV. Follow these steps:

1. Ensure the two emitters (of the GTMEDIA remote and your TV remote) are aligned and kept 1-3cm apart.
2. Press the "/SET" button on the GTMEDIA remote for 5 seconds until the indicator changes from blinking to a long light, entering the learning state.
3. Press the button you want to learn on the GTMEDIA remote. The indicator will blink slowly, entering the learning receiving state.
4. Press the corresponding button on your TV remote for approximately 1 second and release. After learning, the indicator will change from blinking to a long light. Repeat steps 3-4 for other buttons.
5. To finish learning, press any other key on the GTMEDIA remote to save automatically and exit the learning state. The indicator will turn off.

Isakoso Software

Igbesoke USB

To upgrade the receiver's firmware via USB:

1. Prepare a USB flash drive with the correct upgrade file (e.g., MP_GTmeida V7.bin) in its root directory.
2. Insert the USB flash drive into the receiver's USB port.
3. Navigate to "USB Upgrade" in the menu.
4. Select "Upgrade By USB".
5. Choose "Upgrade Mode: All Code" to update the entire firmware, or "Main Code" for system main functions, or "User DB" for user database.
6. Ensure the "Upgrade File" displayed matches your file. Warning: Choosing the wrong software can cause the machine to not work properly.
7. Press the OK button on "Start" to begin receiving data from the USB device.
8. The system will automatically run to upgrade the program and restart after completion.

Important: Do not power off the device during the upgrade process. Do not upgrade with software from other companies to avoid system damage.

USB Afẹyinti

To back up the receiver's firmware or user database to a USB disk:

1. Insert a USB flash drive into the receiver's USB port.
2. Navigate to "USB Backup" in the menu.
3. Select "Backup Mode: All Code" to back up the entire firmware, or "User DB" to back up the user database.
4. Press the OK button on "Start" to begin sending data to the USB device.
5. A success prompt will appear upon completion.

Note: If the USB device is not connected, these options will be greyed out and cannot be edited.

Laasigbotitusita

Warning! Under no circumstances attempt to repair the receiver yourself. Tampgbigbi pẹlu olugba le ja si mọnamọna ina paniyan ati pe yoo sọ atilẹyin ọja rẹ di asan.

If you encounter issues, please refer to the following general advice:

• Ko si Agbara: Check if the power adapter is securely connected to both the receiver and the wall outlet. Ensure the wall outlet is functioning.
• Ko si ifihan agbara: Verify that the LNB cable from the satellite dish is correctly connected to the "LNB IN" port. Check your satellite dish alignment.
• Ko si Aworan/Ohun: Ensure the HD cable or AV cables are properly connected to both the receiver and the TV. Confirm your TV is set to the correct input source (HDMI or AV).
• Iṣakoso latọna jijin Ko Ṣiṣẹ: Ṣàyẹ̀wò àwọn bátìrì tí ó wà nínú ìṣàkóso latọna jijin. Rí i dájú pé kò sí ìdènà láàárín sensọ IR ti receiver àti sensọ IR ti receiver.
• Awọn ọrọ sọfitiwia: If the device is not functioning correctly after a software update, ensure you used the correct firmware file for your model. If issues persist, consider performing a factory reset (refer to menu options) or re-flashing the firmware.

For more support guidelines, please contact the official webojula: http://www.freesat.cn.

Awọn pato

Below are the technical specifications for the GTMEDIA V7 S2X Satellite HD Receiver:

Gbogbogbo ọja paramita

olusin 3: Ọja Parameters. This image provides a table of key product specifications including dimensions, weight, power supply, operating conditions, and accessories.

Afikun ni pato

Figure 4: DVB Specifications. This image details DVB specifications for the GTMEDIA V7 S2X, including System Standard, Frequency Range, and ANT Connector.

Awọn imọran Olumulo

• Preselected Channels: Some users have noted that channels may come preselected, simplifying initial setup for certain regions. However, it's always recommended to perform a channel scan to ensure all available channels are found and updated.
• Awọn imudojuiwọn famuwia: Ṣe àyẹ̀wò òṣìṣẹ́ déédéé webAaye (www.freesat.cn) for the latest firmware updates to ensure optimal performance and access to new features. Always use the correct firmware for your model.
• Ẹkọ Iṣakoso Latọna jijin: Utilize the remote control's learning function to consolidate control of your TV and receiver into a single remote for convenience.

Atilẹyin ọja ati Support

This product comes with a warranty card included in the package. Please refer to the warranty card for details regarding coverage and terms.

For technical support, additional guidelines, or to download the latest user manual (PDF), please visit the official GTMEDIA webojula:

http://www.freesat.cn

You can also find the user manual PDF directly at: GTMEDIA V7 S2X & V7 PRO User Manual (PDF)