URIT PFS-30 Blood Lipid Analyzer User Manual

1. Ifihan

The URIT PFS-30 Blood Lipid Analyzer is a portable, easy-to-use device designed for the quantitative measurement of various blood lipid parameters. This 5-in-1 analyzer provides fast and accurate results for Total Cholesterol (TC), High-density Lipoprotein (HDL), Triglycerides (TG), Low-density Lipoprotein (LDL), and the TC/HDL Ratio. It is intended for in vitro diagnostic use by healthcare professionals and trained individuals for monitoring blood lipid levels.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your URIT PFS-30 Blood Lipid Analyzer. Please read it thoroughly before first use and keep it for future reference.

2. Alaye Aabo pataki

Please observe the following safety precautions to ensure safe operation and to prevent damage to the device or injury to the user:

• This device is for in vitro diagnostic use only. Do not use it for self-diagnosis or to alter medication without consulting a healthcare professional.
• Always use URIT PFS-30 Blood Lipid Test Strips with the analyzer. Using other test strips may lead to inaccurate results.
• Keep the device and test strips out of reach of children.
• Dispose of used test strips, lancets, and other blood-contacting materials according to local regulations for biohazardous waste.
• Avoid extreme temperatures, humidity, and direct sunlight. Store the device and strips as recommended.
• Do not disassemble or attempt to repair the device yourself. Contact authorized service personnel for repairs.
• Ensure hands are clean and dry before handling the device and test strips.
• Consult a healthcare professional for interpretation of results and medical advice.

3. Package Awọn akoonu

Upon unpacking, verify that all items are present and undamaged. The standard package typically includes:

• URIT PFS-30 Blood Lipid Analyzer Unit
• URIT PFS 30 Blood Lipid Test Strips (quantity may vary by kit)
• Ẹrọ Lancing
• Awọn aṣọ-ikele
• Awọn tubes capillary
• Code Card (for test strips)
• Afowoyi Olumulo (iwe-ipamọ yii)
• Ọran gbigbe
• AAA Batteries (may or may not be included)

4. Ọja Ipariview

The PFS-30A Blood Lipid Analyzer is designed for convenience and accuracy, offering a comprehensive lipid profile analysis from a single blood drop.

4.1 Key Awọn ẹya ara ẹrọ

• Ìwọ̀n 5-nínú-1: Measures Total Cholesterol (TC), Triglycerides (TG), High-density Lipoprotein (HDL), Low-density Lipoprotein (LDL), and TC/HDL Ratio.
• Awọn esi Yara: Provides results in approximately 2 minutes.
• Yiye giga: Utilizes optical reflectance principle for reliable measurements.
• Onirọrun aṣamulo: Easy to operate with a large LCD screen for clear display.
• Ibi ipamọ data: Stores up to 300 sample esi.
• Abajade data: Supports USB and Bluetooth data transmission (Bluetooth available only for PFS-30 model).
• CHD Risk Assessment: Features FRA/PRO method for Coronary Heart Disease (CHD) risk evaluation.
• Ibi iwọn otutu ti o tobi: Accurate operation across a wide range of ambient temperatures.
• Printer Compatible: Can be connected to a compatible printer for result printouts.

5. Eto

Before using the URIT PFS-30 Blood Lipid Analyzer, ensure it is properly set up.

5.1 Fifi sori batiri

• Locate the battery compartment on the back of the analyzer.
• Ṣii ideri iyẹwu naa.
• Fi awọn batiri AAA mẹta (3) sii, ki o rii daju pe polarity ti o tọ (+/-).
• Pa ideri batiri naa ni aabo.

5.2 Initial Power On and Code Card Reading

Each new box of test strips comes with a code card. It is crucial to insert the correct code card into the analyzer before performing tests with a new batch of strips to ensure accurate results.

1. Tan-an: Press and hold the power button (usually marked with a power symbol) on the analyzer. The device will power on and perform a self-check.
2. Read the Code Card: Insert the code card that comes with your test strip bottle into the code card slot on the analyzer. Ensure the code on the card matches the code printed on the strip bottle. The analyzer will automatically read the code.

6. Awọn ilana Iṣiṣẹ

Follow these steps to perform a blood lipid test using the URIT PFS-30 Blood Lipid Analyzer.

6.1 Ngbaradi fun Idanwo kan

• Ensure the analyzer has fresh batteries and the correct code card is inserted for the test strips you are using.
• Fọ ọwọ rẹ daradara pẹlu ọṣẹ ati omi gbona, lẹhinna gbẹ wọn patapata.
• Prepare the lancing device with a new lancet according to its instructions.
• Have a clean, dry surface ready for the analyzer and supplies.

6.2 Ṣíṣe Ìdánwò náà

1. Insert the Test Strip: With the analyzer powered on and displaying a flashing strip symbol, carefully insert a new test strip into the strip port. The analyzer will beep and display a blood drop symbol when ready.
2. Collect Blood: Use the lancing device to prick the side of your fingertip to obtain a blood sample. Gently squeeze your finger to form a round drop of blood.
3. Add the Blood Drop: When the blood drop symbol is flashing on the screen, immediately apply the blood sample to the designated test hole on the test strip. Ensure the blood completely fills the sample area. Do not smear the blood.
4. Wait for Results: The analyzer will begin the measurement process. The result will be displayed on the screen within 2 minutes (120 seconds).
5. Read the Result: Once the result is displayed, note down the values. The analyzer will show TC, HDL, TG, LDL, and TC/HDL Ratio.
6. Dispose of Used Materials: Carefully remove the used test strip and dispose of it, along with the lancet, in a suitable biohazard container according to local regulations.

Akiyesi: For optimal accuracy, ensure the sample volume is between 35-40 µL. Capillary or venous whole blood can be used as a sample iru.

7. Itọju ati Ipamọ

7.1 Cleaning the Analyzer

• Wipe the exterior of the analyzer with a soft, damp asọ.
• If necessary, use a mild detergent or a 70% ethanol solution for cleaning.
• Do not immerse the analyzer in water or any other liquid.
• Yago fun lilo abrasive afọmọ tabi olomi ti o le ba awọn ẹrọ.
• Ensure the test strip port is free of dust or debris. Use a soft brush if needed.

7.2 Ibi ipamọ

• Store the analyzer and test strips in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep test strips in their original sealed container and use them before the expiration date.
• If the analyzer will not be used for an extended period, remove the batteries to prevent leakage.
• Store the device in its carrying case to protect it from dust and physical damage.

8. Laasigbotitusita

If you encounter issues with your URIT PFS-30 Blood Lipid Analyzer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact URIT customer support for further assistance.

9. Imọ ni pato

10. Awọn imọran olumulo

Ko si kan pato olumulo awọn italolobo wà wa lati tunviews or Q&A for this product. However, general best practices for blood lipid testing include:

• Always follow fasting instructions from your healthcare provider before testing, especially for Triglycerides.
• Ensure your hands are warm before pricking your finger to improve blood flow and sample gbigba.
• Avoid squeezing your finger excessively after pricking, as this can dilute the blood sample with interstitial fluid and affect accuracy.
• Keep a log of your results to track trends over time and share with your healthcare provider.

11. Atilẹyin ọja ati Support

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or contact the manufacturer/seller directly. Keep your purchase receipt as proof of purchase.