Awọn iwe afọwọkọ+

GLEDOPTO GL-C-601P

GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller User Manual

Awoṣe: GL-C-601P

1. Ifihan

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller is a versatile smart lighting solution designed for controlling various LED strip types. It supports RGBCCT, RGBW, RGB, CCT, and Dimmer modes, offering comprehensive control over your lighting environment. Operating on the ZigBee 3.0 protocol, it ensures stable connectivity with a wide range of smart home platforms.

Awọn ẹya pataki pẹlu:

  • Whole-Home Integration: Compatible with ZigBee-certified hubs such as Philips Hue, Amazon Echo Plus, Homey, Conbee II, and SmartThings for seamless smart home integration.
  • Jakejado Voltage atilẹyin: Works with 5–24V PWM dimmable LED strips.
  • Imudara Aabo: Features a user-replaceable 20A pluggable fuse for robust protection against overcurrent and short circuits.
  • Awọn aṣayan Iṣakoso Rọrun: Control via your ZigBee network using a smartphone app or voice assistant (e.g., Amazon Alexa). Can also be paired with an optional GLEDOPTO 2.4G RF remote for standalone functionality.
  • Fifi sori ẹrọ lainidii: Equipped with redesigned WAGO push-in connectors for quick, screwless wiring. Offers three power input types: V+/V- terminal, DC5.5×2.1mm jack, and Type-C port.
  • Imọlẹ Aṣa: Innovative Mix mode allows blending color and white light, with 16 million hues and a 2700K–6500K temperature range adjustable via app, voice, remote, or the tactile push switch.

2. Alaye Aabo

Jọwọ ka ati loye gbogbo awọn ilana aabo ṣaaju fifi sori ẹrọ ati lilo. Ikuna lati tẹle awọn ilana wọnyi le ja si mọnamọna, ina, tabi awọn eewu miiran.

  • This device is designed for use with DC 5-24V PWM dimmable LED strip lights only. Do NOT use with Addressable RGBIC LED strips.
  • Rii daju pe ipese agbara voltage matches the requirements of your LED strip and controller (DC 5-24V).
  • Always disconnect power before installing or servicing the controller.
  • The controller includes a user-replaceable 20A fuse for protection. If the fuse blows, replace it with a fuse of the same rating.
  • This device requires a standard ZigBee gateway (e.g., Philips Hue, Amazon Echo Plus, Homey, Conbee II, SmartThings) for smart home integration.
  • If no ZigBee gateway is available, a GLEDOPTO 2.4G RF remote control or wall switch is required for operation. This device is only compatible with the GLEDOPTO 2.4G RF remote control.
  • Keep the device away from water, moisture, and extreme temperatures (-20°C to 45°C).
  • Do not attempt to disassemble or modify the controller beyond replacing the fuse.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

  • 1x ZigBee 3.0 Five in One LED Controller Pro Max (GL-C-601P)
  • 1x Itọsọna olumulo
  • Sítíkà 1x 3cm
  • 1x 20A Pluggable Fuse (pre-installed or spare)
Diagram showing the contents of the GLEDOPTO GL-C-601P package: packaging box, 3cm sticker, user instruction, 5A pluggable fuse, and the Zigbee Pro Max 5 in 1 Smart LED Controller.
Nọmba 3.1: Awọn akoonu Package

4. Awọn pato

Paramita Iye
Awoṣe No. GL-C-601P
Iṣagbewọle Voltage DC 5-24V
Lapapọ Ijade lọwọlọwọ Iye ti o ga julọ ti 15A
Ijade lọwọlọwọ/ikanni Iye ti o ga julọ ti 10A
Iru-C Voltage 5V
Iru-C Lọwọlọwọ Iye ti o ga julọ ti 3A
O pọju. Gbigba agbara 360W
IP oṣuwọn IP20
Ohun elo Ina Retardant PC
Àwọ̀n Àwọ̀n (NW) 70.8g
Àdánù Àdánù (GW) 81.6g
Awọn iwọn (L*W*H) 129 x 50 x 23mm
Awọn iwọn otutu ti nṣiṣẹ -20°C si 45°C
Ijinna jijin 30m
Ipo Asopọmọra ZigBee 3.0
Awọn imọlẹ to wulo RGBCCT, RGBW, RGB, WWCW Dimmer LED Strip Light
Ọna iṣakoso APP, Voice, 2.4G RF Remote
Awọn iwe-ẹri CCC, CE, EMC, FCC, LVD, ROHS
Atilẹyin ọja ọdun meji 2
Diagram showing the product structure and size of the GLEDOPTO GL-C-601P controller, with dimensions 129mm length, 50mm width, and 23mm height. Labels indicate the 20A fuse, output wiring terminal, indicator, Opt button, Reset button, DC/Type-C port, and V+/V- input.
Figure 4.1: Product Structure and Size
Table of product parameters for the GLEDOPTO GL-C-601P controller, listing Model No., Input Voltage, Total Output Current, Output Current/Channel, Type-C Voltage, Type-C Current, IP Rate, Material, N.W., G.W., Size, and Operating Temperature.
Nọmba 4.2: Awọn Ilana Ọja Alaye
Comparison table of wireless protocols: Zigbee 3.0, Wifi, and Bluetooth, showing differences in power consumption, stability, anti-interference ability, security & privacy, and number of product connections.
Figure 4.3: Wireless Protocol Comparison

5. Eto

5.1 Power Input Methods

The controller offers three convenient ways to connect power:

  1. V+/V- Power Interface: Standard screw terminals for direct wire connection.
  2. Socket DC 5.5x2.1mm: For use with a standard DC power adapter.
  3. Iru-C Ni wiwo: For 5V power input, typically from a USB wall adapter (not PC USB).
Diagram illustrating the three input methods for the GLEDOPTO GL-C-601P controller: V+/V- power interface, 5.5x2.1mm DC Socket, and Type-C interface.
Figure 5.1: Three Power Input Methods

5.2 Wiring aworan atọka

Connect your LED strip to the output terminals according to the type of strip you are using. The controller supports RGBCCT, RGBW, RGB, CCT, and Dimmer configurations. Ensure correct polarity (V+ and V-) and channel connections (R, G, B, W, C, V-).

Detailed wiring diagram for the GLEDOPTO GL-C-601P controller, showing connections for RGB CCT, RGBW, RGB, CCT, and Dimmer LED strips. Each configuration illustrates the required DC power supply and the specific output terminals to use for each color channel.
Figure 5.2: Wiring Diagram for Various LED Strip Types

5.3 ZigBee Gateway Pairing

To integrate the controller into your smart home system, you will need a compatible ZigBee gateway (e.g., Philips Hue Bridge, Amazon Echo Plus, Homey, Conbee II, SmartThings). Follow the instructions provided by your specific ZigBee gateway to add a new device. The controller will typically enter pairing mode automatically when powered on for the first time or after a reset.

Resetting the Controller for Pairing: If the controller does not pair, or if you wish to pair it with a new gateway, long press the 'Reset' button on the device for 5 seconds until the indicator light changes, signaling it is ready for pairing.

6. Awọn ilana Iṣiṣẹ

The GL-C-601P controller offers multiple ways to control your LED strips:

6.1 Key Functions on the Device

Diagram showing the key functions of the GLEDOPTO GL-C-601P controller: Reset button, Opt button, Push button, and Indicator light. Descriptions for short press and long press actions are provided for each button.
Figure 6.1: Controller Key Functions
  • Bọtini atunto:
    • Short press: Switches the frequency (see Section 6.4).
    • Long press (5 seconds): Resets the controller to factory settings, useful for pairing.
  • Bọtini ijade:
    • Short press: Switches the current device function/mode (e.g., RGBCCT, RGBW, RGB, CCT, Dimmer).
    • Long press (5 seconds): Accesses power-on status settings (see Section 6.3).
  • Bọtini Titari:
    • Short press: Powers the LED strip On/Off.
    • Long press: Adjusts brightness. (Long press increases brightness; release and long press again decreases brightness).
  • Imọlẹ Atọka: Displays different colors corresponding to the current operating mode.

6.2 Five Mode Switching

The controller supports five distinct modes for different LED strip types. Short press the 'Opt' button to cycle through these modes:

  • RGBCCT
  • RGBW
  • RGB
  • CCT (Iwọn otutu awọ)
  • Dimmer
Diagram illustrating the five mode switching capability of the GLEDOPTO GL-C-601P controller. Icons represent RGB CCT, RGBW, RGB, CCT, and Dimmer modes. A short press of the 'Opt' button switches the current device mode.
Figure 6.2: Five Mode Switching

6.3 Power-pipa Memory Išė

The controller offers two optional power-on behaviors after a power failure:

  1. Remember State: The lights will return to their last on/off state and brightness/color settings.
  2. Lights Up by Default: The lights will turn on to a default setting (e.g., full brightness white) regardless of their state before power loss.

To switch between these modes, long press the 'Opt' button for more than 5 seconds. The indicator light will flash blue 3 times to confirm the change.

Illustration of the power-off memory function, showing two modes: 'Remember the state of the on/off before power failure' and 'Lights up by default when powered on'. Instructions indicate long pressing the 'Opt' key for more than 5 seconds and observing the indicator light flashing blue 3 times.
Figure 6.3: Power-off Memory Function

6.4 Igbohunsafẹfẹ Eto

The controller allows for one-touch frequency switching to adapt to different power supplies and reduce noise. Short press the 'Reset' button to cycle through the frequencies:

Igbohunsafẹfẹ Filasi
600Hz 1 igba
800Hz 2 igba
1000Hz 3 igba
2000Hz 4 igba
4000Hz 5 igba
8000Hz 6 igba
Diagram showing frequency settings for the GLEDOPTO GL-C-601P controller. It lists frequencies from 600Hz to 8000Hz and the corresponding number of indicator light flashes. Instructions mention one-touch frequency switching using the Reset button.
Figure 6.4: Frequency Settings

6.5 App Iṣakoso

Once paired with a ZigBee gateway, you can control the LED strip via your smart home app. This typically allows for:

  • Adjusting 16 million colors.
  • Setting brightness levels (1% to 100%).
  • Adjusting color temperature (2700K–6500K).
  • Creating and activating custom scenes.
Screenshot of a mobile app interface for controlling LED lighting, showing color wheel, brightness slider, and color temperature adjustment. This demonstrates how to set the right ambiance with 16 million colors, adjustable brightness, and color temperature.
olusin 6.5: App Iṣakoso Interface

6.6 Iṣakoso ohun

With a compatible ZigBee gateway and voice assistant (e.g., Amazon Alexa), you can control your lights using voice commands. Example pẹlu:

  • "Alexa, tan ina ile gbigbe."
  • "Alexa, set to purple."
  • "Alexa, increase to 70%."
Image demonstrating voice control with Amazon Alexa and Google Home devices, showing example commands like 'Turn on the living room light', 'set to purple', and 'increase to 70%'. Also shows a 2.4G RF remote control for scene memory functions.
olusin 6.6: Voice Iṣakoso Integration

6.7 2.4G RF Remote Control (Optional)

If you are using a GLEDOPTO 2.4G RF remote control (sold separately), you can control the LED strip directly without a ZigBee gateway. The remote typically offers:

  • Titan/Pa Iṣakoso.
  • Brightness and color adjustments.
  • Scene memory functions (S1, S2, S3, S4 buttons). Long press a scene button to save the current settings; short press to activate a saved scene.

6.8 Mix Mode (RGB + White Light)

The Mix mode allows you to blend RGB colors with white light for unique lighting effects. This is particularly useful for RGBCCT and RGBW strips.

  • When the color loop in your app moves to the edge, only the RGB light turns on.
  • When the color loop moves to the middle, both the RGB light and White light turn on together, allowing for richer, more nuanced colors.
Illustration of RGB+White Light Mix mode. The top image shows the app color wheel with the selector at the edge, resulting in only RGB light. The bottom image shows the selector in the middle, resulting in both RGB and White light turning on together.
Figure 6.7: RGB+White Light Mix Mode

7. Itọju

  • Ninu: Gently wipe the controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ayika: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Rirọpo Fuse: If the LED strip stops working, check the 20A pluggable fuse. If it is blown, replace it with a new fuse of the same rating (20A). Always disconnect power before replacing the fuse.

8. Laasigbotitusita

Isoro Owun to le Fa Ojutu
LED strip not turning on.
  • Ko si agbara si oludari.
  • Ti firanṣẹ ti ko tọ.
  • Fiusi ti fẹ.
  • LED strip faulty.
  • Ṣayẹwo ipese agbara ati awọn asopọ.
  • Ṣàyẹ̀wò àwọn okùn waya gẹ́gẹ́ bí Apá 5.2.
  • Check and replace the 20A fuse if necessary.
  • Test the LED strip with another power source if possible.
Controller not responding to app/voice commands.
  • Not paired with ZigBee gateway.
  • Weak ZigBee signal.
  • Gateway/app issue.
  • Ensure controller is paired with your ZigBee gateway (Section 5.3).
  • Move controller closer to the gateway or use a ZigBee repeater.
  • Restart your ZigBee gateway and smart home app.
Isakoṣo latọna jijin ko ṣiṣẹ.
  • Latọna jijin ko so pọ mọ.
  • Remote battery low/dead.
  • Incorrect remote type.
  • Ensure the GLEDOPTO 2.4G RF remote is correctly paired.
  • Rọpo batiri latọna jijin.
  • Confirm you are using a GLEDOPTO 2.4G RF remote control.
Colors/brightness not adjusting correctly.
  • Ipo ti ko tọ ti yan.
  • Ọrọ wiwakọ.
  • LED strip type mismatch.
  • Short press the 'Opt' button to cycle through modes and select the correct one for your LED strip.
  • Check output wiring for correct channel connections.
  • Ensure your LED strip is compatible with the selected mode (e.g., RGBW strip in RGBW mode).

9. Awọn imọran olumulo

  • Ṣayẹwo ibamu: Always verify that your existing ZigBee gateway and LED strip type are compatible with the GL-C-601P controller before installation.
  • Agbara ifihan agbara: For optimal performance, ensure the controller is within a reasonable range of your ZigBee gateway or a ZigBee repeater to maintain a strong signal.
  • Ibi ti ina elekitiriki ti nwa: Use a stable and appropriately rated DC power supply (5-24V) that matches the total wattage requirements of your LED strip.

10. Atilẹyin ọja ati Support

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller comes with a 2-odun atilẹyin ọja lati ọjọ rira, ibora awọn abawọn iṣelọpọ labẹ lilo deede.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Provide your model number (GL-C-601P) and a detailed description of the issue for faster assistance.

Awọn iwe aṣẹ ti o jọmọ - GL-C-601P

Ṣaajuview GLEDOPTO Zigbee 3in1/5in1 LED Smart Adarí Pro + Afọwọṣe olumulo
Àwọn ìlànà tó péye fún GLEDOPTO Zigbee 3in1 àti 5in1 LED Smart Controller Pro+ (GL-C-201P, GL-C-202P). Ó ní àwọn ìlànà pàtó, ìṣètò, ìsopọ̀ ẹnu ọ̀nà, ìsopọ̀ Zigbee àti RF, wáyà, àti ìṣòro.
Ṣaajuview GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Ilana Olumulo Max
Ìwé ìtọ́ni oníṣẹ́ tó kún rẹ́rẹ́ fún GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max (Model GL-CI-601P). Ó ní àwọn ìlànà pàtó, àwọn iṣẹ́ bọ́tìnì, àwọn iná àmì, àwọn ọ̀nà àtúntò, ìbáṣepọ̀ ọ̀nà àti RF, àwòrán wáyà, ipò agbára, àti àwọn ètò ìgbàlódé.
Ṣaajuview GLEDOPTO ZigBee Controller Pro User Instruction & RGB+CCT Remote Control Guide
Comprehensive user manual for the GLEDOPTO ZigBee Controller Pro and RGB+CCT Remote Control (GL-RC-006Z). Covers features, wiring, gateway connection, reset procedures, remote control operation, mode descriptions, and compatibility with major smart home systems like Philips Hue, Amazon Echo Plus, and SmartThings.
Ṣaajuview GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max User Manual
User manual for the GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max. Provides specifications, setup instructions, wiring diagrams, pairing guides, and troubleshooting for RGBCCT, RGBW, RGB, CCT, and Dimmer LED strips.
Ṣaajuview Itọsọna olumulo Gledopto Zigbee Pro ati Itọsọna Ibamu
Awọn ilana olumulo fun Gledopto Zigbee Adarí Pro, pẹlu awọn aworan onirin, ibaramu ẹnu-ọna, ati isakoṣo latọna jijin. Kọ ẹkọ bii o ṣe le sopọ ati ṣiṣẹ awọn ẹrọ Gledopto Zigbee rẹ pẹlu ọpọlọpọ awọn eto ile ọlọgbọn.
Ṣaajuview GLEDOPTO LED Dimmer Adarí Pro Olumulo Ilana
Awọn ilana olumulo fun GLEDOPTO LED Dimmer Controller Pro (GL-C-009P), ṣe alaye awọn asopọ waya, sisopọ ẹnu-ọna, awọn ilana atunto, ati ibaramu isakoṣo latọna jijin.