1. Ọja Ipariview
The Eversame TU13 USB Tester is a professional measurement tool designed for precise monitoring and analysis of USB and Type-C devices. It supports a wide range of fast-charging protocols and offers a comprehensive display of critical parameters for professional performance evaluation. Equipped with a 360° auto-rotating screen and gravity sensing, the TU13 provides detailed insights into voltage, current, and battery capacity.
2. Eto ati Ibẹrẹ Lilo
- Ṣii silẹ: Carefully remove the TU13 USB Tester and any included accessories from its packaging.
- Asopọmọra: Connect the Type-C or USB-A input of the tester to your power source (e.g., charger, power bank). Then, connect your device (e.g., phone, laptop) to the corresponding output port on the tester.
- Agbara Tan: The device will automatically power on and display real-time measurement data once connected to a power source.
- PD Mode Function: The TU13 features a PD Protocol Gear Switch, allowing seamless switching between 'Monitoring Mode' and 'Simulation Mode' to suit different testing requirements and protect your equipment from burnout.
3. Awọn ilana Iṣiṣẹ
3.1 Àwọn Ìkàjáde Ìfihàn
The high-definition color screen displays real-time data including:
- VBUS: Voltage of the USB bus.
- IBUS: Current flowing through the USB bus.
- Agbara: Calculated power (Voltagex Lọwọlọwọ).
- Ilana: Detected fast charging protocol (e.g., PD, SCP, AFC).
- NTC: Kika iwọn otutu.
- DP/DM: Data line voltage kika.
- CC1/CC2: Configuration Channel voltage readings for Type-C.
3.2 Automatic Protocol Detection
The TU13 automatically identifies various fast charging standards, ensuring compatibility with a broad spectrum of devices and chargers. This allows for comprehensive testing of different charging environments.
3.3 abẹlẹ Eto
The device allows customization of various settings. Refer to the diagram below for an overview of the available options:
- Èdè: Switch between available display languages (e.g., English).
- Akoko Iduro: Adjust the time before the device enters standby mode.
- O kere lọwọlọwọ: Set the minimum current threshold for detection.
- Voltage/Current Adjust: Fine-tune voltage and current readings for calibration.
- CPU_T Adjust: Adjust CPU temperature display.
- Working Light/Standby Light: Control indicator light behavior.
- Zero No-Load I: Calibrate zero current reading when no load is connected.
- Gravity Switch: Enable/disable gravity sensing for screen rotation.
- Protocol Tips: Toggle display of protocol-related tips.
- Eto Aiyipada: Tun gbogbo eto pada si awọn aṣiṣe ile-iṣẹ.
- All Data Zero: Clear all stored data.
3.4 Advanced Monitoring
The TU13 also features high-speed voltage ripple monitoring and cable resistance detection for thorough testing and analysis of charging performance and cable quality.
4. Itọju
- Ninu: Lo asọ asọ ti o gbẹ lati nu ẹrọ naa. Ma ṣe lo abrasive ose tabi epo.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Mimu: Yago fun sisọ ẹrọ naa silẹ tabi fifisilẹ si awọn ipa to lagbara.
5. Laasigbotitusita
- Ko si Ifihan: Rí i dájú pé ẹni tí ó ń dán an wò náà so mọ́ orísun agbára àti ẹ̀rọ dáadáa. Ṣàyẹ̀wò bóyá orísun agbára náà ń ṣiṣẹ́.
- Awọn kika ti ko pe: Ensure all connections are secure. If issues persist, try resetting the device to default settings via the 'Background Settings' menu (refer to Section 3.3).
- Ohun elo Ko Ngba agbara: Verify that both the power source and the connected device are functioning correctly independently of the tester. Check cable integrity.
6. Awọn pato
| Iwa | Iye |
|---|---|
| Ẹya ẹrọ Iru | Awọn ẹya ẹrọ batiri |
| Iwọn Iwọn Iwọn (Voltage) | 0-50V |
| Iwọ̀n Ìwọ̀n (Lọ́wọ́lọ́wọ́) | 0-6.5A |
| Ohun elo | ABS |
| Ṣaja To wa | Rara |
| Batiri To wa | Rara |
| Kemikali ti o ni ifiyesi giga | Ko si |
| Ipilẹṣẹ | Orile-ede China |
| Idiwon Iwọn (L x W x H) | 9cm x 5cm x 7cm |
| Package iwuwo | 0.31 kg |
6.1 konge
The TU13 USB Tester undergoes rigorous calibration using software-based learning technology, achieving measurement accuracy on par with large-scale professional instruments.
7. Awọn imọran olumulo
- Always ensure a stable power source for accurate readings.
- For critical measurements, allow the device to stabilize for a few seconds after connection.
- Experiment with 'Monitoring Mode' and 'Simulation Mode' to understand their differences and apply them appropriately for your testing needs.
8. Atilẹyin ọja ati Support
Fún ìbéèrè èyíkéyìí, ìrànlọ́wọ́ ìmọ̀-ẹ̀rọ, tàbí ẹ̀tọ́ àtìlẹ́yìn, jọ̀wọ́ kàn sí olùtajà tàbí olùpèsè taara. Jẹ́ kí ìwé ẹ̀rí ìrajà rẹ jẹ́ ẹ̀rí ìrajà náà.
