1. Ifihan
This manual provides essential information for the proper installation, operation, and maintenance of your MDLS-20265 Reflective LCD Display Screen. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Note: This is a compatible display and not an original part. It features a yellow display color.
2. Alaye Aabo
- Always handle the display with care to avoid physical damage.
- Ensure power is disconnected before making any electrical connections.
- Operate the display within the specified voltage and temperature ranges to prevent damage.
- Avoid exposing the display to static electricity. Use appropriate ESD precautions.
- Do not attempt to disassemble or modify the display, as this may void any implied support and cause damage.
3. Ọja Ipariview
The MDLS-20265 is a character-based Reflective LCD Display module designed for various embedded applications. It features a 24-character by 2-line display format with a 5x8 dot matrix for each character. Being a reflective display, it does not include a backlight, making it suitable for environments with ambient light.
3.1. Display Components
4. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | MDLS-20265 |
| Ipo Ọja | Atijo |
| Iru | LCD ohun kikọ |
| Nọmba ti ohun kikọ | 48 |
| Ifihan kika | 24 x 2 (24 characters per line, 2 lines) |
| Ohun kikọ kika | 5 x 8 Aami |
| Ifihan Iru | STN - Super-Twisted Nematic |
| Ipo ifihan | Ifojusi |
| Imọlẹ ẹhin | Laisi Backlight |
| Iwọn ti ohun kikọ | 5.15mm H x 3.15mm W |
| Dot Iwon | 0.60mm W x 0.60mm H |
| Outline (L x W x H) | 118.00mm x 36.00mm x 6.60mm |
| Viewing Area (L x W) | 93.50mm L x 15.80mm W |
| Voltage - Ipese | 5V |
| Ni wiwo | Ni afiwe |
| Adarí | SPLC780 or Equivalent |
| Awọn iwọn otutu ti nṣiṣẹ | -20°C ~ 70°C |
| Awọ abẹlẹ | Alawọ ewe |
| Awọ ọrọ | - (Determined by display properties) |
| Ipilẹṣẹ | Orile-ede China |
5. Eto
5.1. Awọn Itọsọna Asopọmọra
The MDLS-20265 LCD module utilizes a parallel interface, typically compatible with standard HD44780-type controllers (or SPLC780 equivalent). This interface requires multiple data lines (4-bit or 8-bit mode), register select (RS), read/write (R/W), and enable (E) control lines, in addition to power and ground connections.
- Ibi ti ina elekitiriki ti nwa: Connect the VCC pin to a stable 5V DC power source and GND to ground.
- Data Lines: Connect the D0-D7 (or D4-D7 for 4-bit mode) pins to your microcontroller's I/O pins.
- Control Lines:
- RS (Register Select): Controls whether the data bus is used for commands (low) or data (high).
- R/W (Read/Write): Controls the direction of data flow (write to display when low, read from display when high). For most applications, this can be tied to ground if only writing to the display.
- E (Enable): Used to latch information into the display module. A pulse (high to low) is typically required.
- Atunse itansan: A potentiometer is usually connected to the V0 (or VEE) pin to adjust the display contrast. This is crucial for readability, especially for reflective displays.
Consult the datasheet for the SPLC780 (or equivalent) controller for detailed pinout and timing diagrams specific to your application.
6. Awọn ilana Iṣiṣẹ
Operating the MDLS-20265 involves sending commands and data to its controller via the parallel interface. This typically requires a microcontroller to manage the communication protocol.
6.1. Ibẹrẹ
Before displaying any characters, the LCD module must be initialized. This involves a sequence of commands to set the display mode (e.g., 4-bit or 8-bit interface), number of lines, character font, and to clear the display.
6.2. Displaying Characters
Once initialized, characters can be sent to the display. Each character is typically represented by its ASCII value. The controller automatically handles character placement based on the current cursor position. Commands are available to move the cursor, clear the display, and control display on/off.
6.3. Atunse itansan
Adjust the potentiometer connected to the V0 pin to achieve optimal contrast. This setting can vary depending on ambient lighting conditions and viewigun igun.
7. Itọju
- Ninu: Lo asọ asọ, ti ko ni lint die-die dampened with water or a mild, non-abrasive cleaner to wipe the display surface. Avoid harsh chemicals or abrasive materials.
- Ibi ipamọ: Store the display in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
- Mimu: Always handle the display by its edges to avoid touching the display area or damaging the PCB components.
8. Laasigbotitusita
- Ko si Ifihan/Iboju òfo:
- Check power connections (5V and GND).
- Adjust the contrast potentiometer (V0 pin). A completely blank or completely black screen can indicate incorrect contrast.
- Verify all data and control lines are correctly connected and that the initialization sequence is being sent by the microcontroller.
- Garbled Characters:
- Ensure the correct data mode (4-bit or 8-bit) is selected in your software and matches the hardware connections.
- Check for loose or incorrect wiring of data lines.
- Verify the timing of the signals (RS, R/W, E) from the microcontroller.
- Ifihan ti ko dahun:
- Confirm the microcontroller is correctly programmed and sending commands.
- Check for short circuits or open circuits on the PCB.
9. Awọn imọran olumulo
- For optimal visibility of reflective displays, ensure adequate ambient light is available.
- Experiment with the contrast adjustment to find the best setting for your specific viewawọn ipo jijẹ.
- When prototyping, consider using a breadboard-friendly adapter for easier connections.
- Many online resources and libraries are available for common microcontrollers (e.g., Arduino, Raspberry Pi) to simplify interfacing with HD44780-compatible LCDs.
10. Atilẹyin ọja ati Support
As a compatible component, specific warranty details may vary. Please refer to the seller's terms of service for any applicable return or replacement policies. For technical support, consult online forums and communities dedicated to embedded electronics and LCD interfacing, or contact your supplier for assistance.
