1. Alaye Aabo
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Read and understand all instructions before operating this machine.
Gbogbogbo Abo Ofin
- Wọ ohun elo aabo ara ẹni ti o yẹ (PPE): Always wear safety glasses or goggles, hearing protection, and a dust mask. Heavy-duty gloves are recommended.
- Jeki agbegbe iṣẹ mọ ki o si tan daradara: Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba.
- Má ṣe ṣiṣẹ́ ní ojú ọjọ́ tí ó kún fún ìbúgbàù: Do not use power tools in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Pa awọn ọmọde ati awọn aladuro kuro: Awọn idamu le fa ki o padanu iṣakoso.
- Iṣẹ iṣẹ to ni aabo: Nigbagbogbo clamp the material firmly before cutting.
- Avoid awkward body positions: Ṣe itọju ẹsẹ to dara ati iwọntunwọnsi ni gbogbo igba.
- Ge asopọ agbara: Always disconnect the machine from the power source before making adjustments, changing accessories, or performing maintenance.
Specific Cut-Off Machine Safety
- Use correct abrasive wheels: Only use 14-inch abrasive cut-off wheels rated for the machine's RPM.
- Inspect wheel before use: Do not use cracked, chipped, or damaged wheels.
- Ensure wheel guard is in place: Never operate the machine without the wheel guard properly installed and functioning.
- Be aware of sparks and debris: Cutting operations produce sparks and hot debris. Clear the area of flammable materials and ensure bystanders are at a safe distance.
- Allow wheel to reach full speed: Before beginning a cut, allow the abrasive wheel to reach its full operating speed.
2. Ọja Ipariview
The Milwaukee 6175-8 is a 14-inch abrasive cut-off machine designed for efficient and portable cutting of various metal materials. It features a powerful 15 amp motor, a durable cast-iron base, and a spindle lock for convenient blade changes. The pivoting wheel guard enhances safety during operation.
Key Awọn ẹya ara ẹrọ
- Alagbara 15 amp motor for demanding cutting tasks.
- Robust cast iron base for stability and durability.
- Spindle lock mechanism for quick and easy abrasive wheel changes.
- Pivoting wheel guard for enhanced user protection.
- Integrated one-piece carrying handle for portability.
- Quick-release locking vise for secure material clamping and angle cutting up to 45 degrees.
Image 2.1: The Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine. This image shows the overall design of the machine, including the motor housing, cutting arm, base, and vise assembly.
3. Eto
Unpacking ati ayewo
- Fi ọgbọ́n yọ ẹ̀rọ àti gbogbo àwọn ohun èlò míì kúrò nínú àpótí náà.
- Inspect the machine for any damage that may have occurred during shipping. If any damage is found, do not operate the machine and contact customer service.
- Verify that all components listed in the packing list are present: cut-off machine, vise, abrasive wheel, and hex wrench.
Igbaradi Agbegbe Iṣẹ
- Place the machine on a stable, level surface capable of supporting its weight and the workpiece.
- Ensure adequate clearance around the machine for safe operation and material handling.
- Clear the area of any flammable materials due to sparks generated during cutting.
Abrasive Wheel Installation
- Rii daju pe ẹrọ naa ti yọ kuro lati orisun agbara.
- Tẹ mọlẹ bọtini titiipa spindle.
- Using the provided hex wrench, loosen and remove the arbor nut and outer flange.
- Place the new 14-inch abrasive wheel onto the arbor, ensuring it is seated correctly against the inner flange.
- Reinstall the outer flange and arbor nut. Tighten the arbor nut securely while holding the spindle lock button. Do not overtighten.
- Release the spindle lock button and manually rotate the wheel to ensure it spins freely and is properly aligned.
Vise Adjustment
- The quick-release vise allows for rapid clamping ati unclampIgi ti workpieces.
- To adjust for different material sizes, loosen the vise handle and slide the movable jaw to the desired position.
- For angle cuts, the vise can be pivoted up to 45 degrees. Loosen the appropriate bolts on the base, adjust the vise to the desired angle using the angle guide, and then securely tighten the bolts.
4. Awọn ilana Iṣiṣẹ
Asopọ agbara
- Connect the machine to a standard 120 Volts AC power outlet. Ensure the circuit can handle the 15 amp motor load.
Ohun elo Clamping
- Place the workpiece firmly against the fence and within the vise jaws.
- Tighten the quick-release vise handle to secure the material. Ensure the material is held firmly and will not shift during the cut.
- The machine can cut pipe up to 5" O.D., bar stock up to 3-5/8", and square stock up to 5".
Ṣiṣe Ge
- Rii daju pe workpiece wa ni aabo clamped and the area is clear.
- Lower the cutting arm slightly to ensure the abrasive wheel clears the workpiece.
- Press the ON switch to start the motor. Allow the abrasive wheel to reach its full operating speed of 3900 RPM before beginning the cut.
- Slowly and steadily lower the cutting arm, allowing the abrasive wheel to cut through the material. Do not force the cut; let the wheel do the work.
- Once the cut is complete, release the ON switch and allow the wheel to stop rotating before raising the cutting arm.
- Àbúròamp the workpiece and remove it from the machine.
5. Itọju
Regular maintenance ensures the longevity and safe operation of your Milwaukee cut-off machine. Always disconnect the machine from the power source before performing any maintenance.
Ninu
- After each use, clean the machine to remove metal dust and debris. Use a brush or compressed air.
- Má ṣe lo àwọn ohun èlò olómi tàbí àwọn kẹ́míkà líle tó lè ba àwọn ẹ̀yà ara ike jẹ́.
- Keep ventilation openings clear to prevent motor overheating.
Abrasive Wheel Replacement
- Replace abrasive wheels when they become worn down, chipped, or damaged. Refer to the "Abrasive Wheel Installation" section for detailed steps.
Ayẹwo gbogbogbo
- Lokọọkan ṣayẹwo okun agbara fun ibajẹ. Ti o ba bajẹ, jẹ ki onimọ-ẹrọ iṣẹ ti o peye rọpo rẹ.
- Check all nuts, bolts, and screws for tightness. Tighten as necessary.
- Ensure the wheel guard operates freely and returns to its protective position.
- Inspect the vise mechanism for smooth operation and secure clamping.
6. Laasigbotitusita
This section addresses common issues you might encounter with your cut-off machine.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko bẹrẹ | Ko si ipese agbara Okun agbara ti ko tọ Motor overload protection tripped | Ṣayẹwo iṣan agbara ati ẹrọ fifọ Ṣayẹwo okun fun ibajẹ; ropo ti o ba wulo Allow motor to cool; reduce load |
| Excessive sparks or smoke during cutting | Dull or incorrect abrasive wheel Forcing the cut Improper material clamping | Replace with a new, sharp abrasive wheel Reduce feed pressure; allow wheel to cut at its own pace Ensure workpiece is securely clamped |
| Awọn gige ti ko pe | Loose workpiece Vise not set correctly Worn abrasive wheel | Ni aabo clamp awọn workpiece Check vise angle and tightness Replace the abrasive wheel |
| Ẹrọ vibrates apọju | Awọn paati alaimuṣinṣin Damaged or unbalanced abrasive wheel Unstable work surface | Ṣàyẹ̀wò kí o sì mú gbogbo àwọn ìdènà náà pọ̀ Inspect and replace abrasive wheel if damaged Ensure machine is on a stable, level surface |
7. Awọn pato
Technical specifications for the Milwaukee 6175-8 14-Inch Abrasive Cut-Off Machine.
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | 6175-8 |
| Mọto Ampigba | 15 Amps |
| Voltage | 120 folti AC |
| Ko si fifuye RPM | 3900 RPM |
| Blade Opin | 14 inches |
| Arbor Iwon | 1 Inṣi |
| Max Cutting Angle | Awọn iwọn 45 |
| Workpiece Capacity (Pipe O.D.) | 5 inches |
| Workpiece Capacity (Bar Stock) | 3-5 / 8 inches |
| Workpiece Capacity (Square Stock) | 5 inches |
| Iwọn Nkan | 52.5 iwon |
| Orisun agbara | Okun Itanna |
| Pataki Ẹya | Spindle Titiipa |
| Ibamu | OSHA |
8. Atilẹyin ọja & Atilẹyin
Alaye atilẹyin ọja
This Milwaukee 6175-8 Abrasive Cut-Off Machine is a reconditioned product. Reconditioned Milwaukee Products are covered by a five-year limited warranty through the Milwaukee factory or an authorized service center. This warranty covers defects in material and workmanship. Please retain your proof of purchase for warranty claims.
Onibara Support
For technical assistance, service, or warranty inquiries, please contact Milwaukee customer support or an authorized Milwaukee service center. Contact information can typically be found on the official Milwaukee webaaye tabi ninu iwe ti a pese pẹlu rira rẹ.
