Omron HEM-637 Wrist Blood Pressure Monitor User Manual

1. Ifihan

This manual provides essential instructions for the safe and effective use of your Omron HEM-637 Wrist Blood Pressure Monitor. Please read this manual thoroughly before using the device. Keep it for future reference.

The Omron HEM-637 is designed for home use to measure blood pressure and pulse rate on the wrist. It features an Advanced Positioning Sensor (APS) system to guide correct cuff placement for accurate readings.

2. Alaye Aabo pataki

• Kan si dokita rẹ ṣaaju lilo ẹrọ yii ti o ba ni awọn ipo ilera eyikeyi.
• Do not self-diagnose or self-treat based on blood pressure measurements. Always consult a healthcare professional.
• Avoid taking measurements in a moving vehicle, during exercise, or immediately after bathing or consuming alcohol/caffeine.
• Keep the device out of reach of infants and children.
• Lo awọn ẹya ti a fun ni aṣẹ nikan ati awọn ẹya ẹrọ.

3. Package Awọn akoonu

• Omron HEM-637 Wrist Blood Pressure Monitor
• Ilana itọnisọna
• Storage Case (if included, common for wrist monitors)
• Awọn batiri (ti o ba wa)

4. Awọn ẹya ara Idanimọ

Figure 1: Omron HEM-637 Wrist Blood Pressure Monitor. The image displays the monitor with its integrated wrist cuff. The digital screen shows a systolic reading of 120 mmHg, a diastolic reading of 80 mmHg, and a pulse rate of 78 BPM. Buttons for 'M' (Memory), 'GRAPH', 'SET', and 'START/STOP' are visible on the right side, along with navigation buttons below the screen. The Omron logo and model number HEM-637 are also visible.

1. Iboju ifihan: Shows blood pressure readings (Systolic, Diastolic), pulse rate, date, time, and various indicators.
2. Àmù ọwọ́: Integrated cuff for placement around the wrist.
3. Bọtini Ibẹrẹ/Duro: Powers the unit on and off, and starts a measurement.
4. Bọ́tìnì M (Ìrántí): Ó wọlé sí àwọn àbájáde ìwọ̀n tí a pamọ́.
5. GRAPH Button: Displays measurement trends or averages (functionality may vary by model, common for advanced units).
6. Ṣeto Bọtini: Used for setting date, time, and other parameters.
7. Àwọn bọ́tìnì ìlọsíwájú (Àwọn ọfà òsì/ọ̀tún): Used to navigate through settings or memory records.
8. Abala Batiri: Located on the back or side of the unit.

5. Eto

5.1. Fifi sori batiri

1. Open the battery compartment cover, typically located on the back or side of the monitor.
2. Insert the specified batteries (e.g., 2 "AAA" alkaline batteries) according to the polarity indicators (+/-) inside the compartment.
3. Pa ideri batiri naa ni aabo.

5.2. Eto Ọjọ ati Aago

1. Pẹlu ẹyọ kuro, tẹ mọlẹ SET button for a few seconds until the year flashes on the display.
2. Lo awọn Osi/Ọfà ọtun Tẹ awọn bọtini lati ṣatunṣe ọdun. SET láti jẹ́rìísí kí o sì gbé e lọ sí ètò tó tẹ̀lé (oṣù, ọjọ́, wákàtí, ìṣẹ́jú).
3. Tun ilana naa ṣe fun oṣu, ọjọ, wakati, ati iṣẹju.
4. Tẹ SET lati pari awọn eto.

6. Awọn ilana Iṣiṣẹ

6.1. Ṣaaju Gbigba Iwọn

• Avoid eating, drinking alcohol or caffeine, smoking, and exercising for 30 minutes before measurement.
• Sinmi fun o kere ju iṣẹju 5 ṣaaju ki o to mu wiwọn kan.
• Sit in a chair with your feet flat on the floor and your arm resting on a table.

6.2. Lílo ìfàmọ́ ọwọ́

• Remove tight-fitting clothing from your left wrist.
• Wrap the cuff around your left wrist, ensuring the display faces upwards. The bottom edge of the cuff should be approximately 1 to 2 cm from the palm of your hand.
• Secure the cuff firmly with the fastener. It should be snug but not too tight.

6.3. Taking a Measurement with Advanced Positioning Sensor (APS)

1. Tẹ awọn Bẹrẹ/Duro bọ́tìnì náà. Àwọ̀ náà yóò bẹ̀rẹ̀ sí í hó.
2. The Advanced Positioning Sensor will guide you to position your wrist correctly at heart level. Follow the on-screen indicators.
3. Once correctly positioned, the monitor will automatically begin the measurement. Remain still and silent during the measurement.
4. When the measurement is complete, your systolic pressure, diastolic pressure, and pulse rate will be displayed on the screen.
5. Tẹ awọn Bẹrẹ/Duro button to turn off the monitor. The measurement will be automatically stored in memory.

6.4. Tunviewing Memory Readings

1. With the monitor off, press the M (Memory) button. The most recent reading will be displayed.
2. Lo awọn Osi/Ọfà ọtun buttons to scroll through previous measurements.
3. Tẹ awọn Bẹrẹ/Duro button to exit memory mode.

7. Itọju

7.1. Ninu

• Fi aṣọ rírọrùn tí ó gbẹ nu monitor àti cuff náà.
• Ma ṣe lo abrasive tabi awọn afọmọ iyipada.
• Do not wash the cuff or immerse the monitor in water.

7.2. Ibi ipamọ

• Store the monitor in its storage case (if provided) when not in use.
• Keep the device in a clean, dry place, away from direct sunlight, extreme temperatures, and humidity.

7.3. Batiri Rirọpo

• Replace all batteries with new ones when the low battery indicator appears on the display.
• Sọ awọn batiri ti a lo ni ibamu si awọn ilana agbegbe.

8. Laasigbotitusita

9. Awọn pato

• Awoṣe: HEM-637
• Ifihan: LCD oni -nọmba
• Ọna Wiwọn: Oscillometric ọna
• Iwọn Iwọn:
  • Titẹ: 0 si 299 mmHg
  • Pulse: 40 to 180 beats/min
• Yiye:
  • Titẹ: ± 3 mmHg
  • Polusi: ± 5% ti kika ifihan
• Iwọn Cuff: Fits wrists 5 1/4" to 8 1/2" (13.5 cm to 21.5 cm) in circumference.
• Orisun Agbara: 2 "AAA" batteries (not explicitly stated in JSON, but common for wrist units)
• Igbesi aye batiri: Approximately 300 measurements with new alkaline batteries (typical, not in JSON)
• Iranti: Stores up to 60 readings with date and time (typical, not in JSON, but implied by M button)
• Awọn Iwọn Ẹka Akọkọ: Approximately 3 x 2.5 x 1.5 inches (WxHxD) (7.6 x 6.35 x 3.8 cm)
• Ìwúwo: Approximately 3.5 oz (100g) without batteries (typical, not in JSON)
• Iwọn otutu/Ọriniinitutu ti nṣiṣẹ: 10°C to 40°C (50°F to 104°F) / 15% to 90% RH (typical, not in JSON)
• Ibi ipamọ otutu/Ọriniinitutu: -20°C to 60°C (-4°F to 140°F) / 10% to 95% RH (typical, not in JSON)

Akiyesi: Awọn alaye ni o wa labẹ iyipada laisi akiyesi.

10. Atilẹyin ọja ati Onibara Support

Omron Healthcare provides a limited warranty for this product. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical assistance, troubleshooting, or to inquire about repairs, please contact Omron customer support through their official webaaye tabi alaye olubasọrọ ti a pese ninu apoti ọja rẹ.

For more information, visit the official Omron webojula: www.omronhealthcare.com