Ọrọ Iṣaaju
Thank you for choosing the Elac CL 82 Stereo Front Loudspeaker. This manual provides essential information for the proper setup, operation, and maintenance of your new loudspeakers. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Elac CL 82 is a passive stereo front loudspeaker designed to deliver high-fidelity audio. It features a robust construction and is engineered for clear and dynamic sound reproduction, suitable for various audio setups including home stereo systems and home theater front channels.
Awọn Itọsọna Aabo
Always observe the following safety precautions to prevent damage to the loudspeakers or personal injury:
- Agbara: Rii daju pe amplifier or receiver connected to the loudspeakers is turned off before making any connections.
- Afẹfẹ: Do not block any ventilation openings. Ensure adequate airflow around the speakers.
- Ọrinrin: Do not expose the loudspeakers to water, moisture, or excessive humidity. The product is not waterproof.
- Ooru: Keep the loudspeakers away from direct heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Ibi: Place the loudspeakers on a stable, level surface to prevent them from falling.
- Ninu: Disconnect the loudspeakers from the amplifier before cleaning. Use only a dry cloth.
- Ṣiṣẹ: Maṣe gbiyanju lati ṣiṣẹ ọja yi funrararẹ. Tọkasi gbogbo iṣẹ si oṣiṣẹ oṣiṣẹ ti o peye.
Ṣeto
1. Unpacking
Carefully remove the loudspeakers from their packaging. Retain the packaging materials for future transport or storage.
2. Ifiweranṣẹ
The Elac CL 82 loudspeakers are designed for shelf mounting. For optimal stereo imaging and sound quality, place the speakers equidistant from your primary listening position and ensure they are at ear level. Avoid placing them directly in corners, which can overemphasize bass frequencies.
Aworan: Iwaju view of the Elac CL 82 loudspeaker, highlighting the distinct tweeter and woofer components. This image illustrates the speaker's design, crucial for understanding its acoustic properties and proper placement.
3. Awọn isopọ
Connect the loudspeakers to your amplifier or receiver using high-quality speaker cables. Ensure correct polarity: connect the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, ati awọn odi (-) ebute lori agbohunsoke si awọn odi (-) ebute lori awọn amplifier. Incorrect polarity will result in poor sound quality and reduced bass response.
Aworan: Alaye view of the Elac CL 82 loudspeaker's drivers. This close-up shows the texture of the tweeter and the metallic sheen of the woofer, providing a visual reference for the speaker's components.
- Iwọn USB: Use appropriate gauge speaker wire for the length of your run. Thicker wire is recommended for longer distances.
- Awọn isopọ to ni aabo: Ensure all connections are tight and secure to prevent signal loss or short circuits.
Ṣiṣẹ
Once properly connected, your Elac CL 82 loudspeakers are ready for use. They operate as passive speakers, meaning they require an external amplifier tabi olugba lati ṣiṣẹ.
- Agbara Tan: Tan-an rẹ amplifier/receiver. Start with the volume at its lowest setting.
- Iṣakoso iwọn didun: Gradually increase the volume to your desired listening level. Avoid excessively high volumes that can cause distortion or damage to the speakers.
- Orisun Olohun: Select your desired audio source (e.g., CD player, turntable, streaming device, computer, television). The CL 82 is compatible with various audio sources.
- Ipo Ohun: The CL 82 is designed for stereo audio output. Ensure your amplifier is set to a stereo or 2.0 channel configuration for optimal performance.
Itoju
Proper care will ensure the longevity and continued performance of your Elac CL 82 loudspeakers.
Ninu
To clean the cabinet, use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry one. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.
Image: The Elac CL 82 loudspeaker with its black protective grille in place, showcasing the complete cabinet design. This view is typical for general use and protection of the drivers.
The speaker grilles can be gently vacuumed to remove dust. If the grilles are removable, they can be carefully detached for cleaning the drivers underneath, but exercise caution to avoid damaging the speaker cones.
Image: Side perspective of the Elac CL 82 loudspeaker with the grille attached, providing a sense of its depth and cabinet construction. This angle is useful for understanding its physical footprint.
Ibi ipamọ
If storing the loudspeakers for an extended period, place them back in their original packaging if possible, and store them in a cool, dry place away from direct sunlight and extreme temperatures.
Laasigbotitusita
If you experience issues with your Elac CL 82 loudspeakers, consult the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Kò sí ohùn láti ọ̀dọ̀ agbohunsoke kan tàbí méjèèjì | Loose or incorrect speaker cable connection; Amplifier/receiver not powered on or input not selected; Speaker protection circuit activated. | Ṣayẹwo gbogbo asopọ okùn agbọrọsọ ni agbọrọsọ ati amplifier ends, ensuring correct polarity. Verify amplifier is on and correct input is selected. Turn off amplifier, duro fun iṣẹju diẹ, lẹhinna tan-an pada. |
| Daru tabi ohun koyewa | Volume too high; Loose connections; Damaged speaker cone; Amplifier clipping. | Reduce volume. Check all speaker cable connections. Inspect speaker cones for visible damage. Ensure amplifier power output matches speaker requirements. |
| Alailagbara tabi ko si baasi | Incorrect speaker polarity; Speakers placed too far from walls or corners. | Verify speaker cable polarity (+ to + and - to -). Experiment with speaker placement closer to walls (but not directly in corners) to enhance bass. |
Ti iṣoro naa ba wa lẹhin igbiyanju awọn ojutu wọnyi, jọwọ kan si awọn oṣiṣẹ iṣẹ ti o peye.
Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Orukọ awoṣe | CL 82 |
| Olupese | Elac |
| Iwọn Nkan | 7.7 kilo |
| Orisun agbara | Ti firanṣẹ Electric |
| Wattage (Igbewọle) | 120 watt |
| O pọju. Agbara Ijade | 200 Wattis |
| Ipo Ijade Ohun | Sitẹrio |
| Iṣagbesori Iru | Selifu Mount |
| Àwọ̀ | Adayeba Wood |
| Awọn ẹrọ ibaramu | Personal computer, Smartphone, Laptop, Tablet, Television, Projector |
| ASIN | B000187FMM |
| Akọkọ Wa Ọjọ | Oṣu Kẹta Ọjọ 15, Ọdun 2020 |
Atilẹyin ọja ati Support
The Elac CL 82 loudspeaker comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including the duration and coverage details.
For technical support, service, or warranty claims, please contact Elac customer service or your authorized dealer. Keep your proof of purchase for warranty validation.
Akiyesi: Awọn atunṣe tabi awọn atunṣe laigba aṣẹ le sọ atilẹyin ọja rẹ di ofo.
