Ìwé Ìtọ́sọ́nà Olùlò Agbọrọsọ Coby CT-P730

1. Ifihan

This manual provides detailed instructions for the setup, operation, and maintenance of your Coby CT-P730 Speakerphone. The CT-P730 is a versatile telephone designed for ease of use, featuring a two-way speakerphone and a 13-number speed dial memory. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device.

Nọmba 1: Coby CT-P730 Speakerphone. This image displays the white telephone unit, including the handset, coiled cord, numeric keypad, speaker grille, and various function buttons such as HOLD, SPEAKERPHONE, REDIAL, and speed dial keys.

2. Awọn ẹya Ọja

• Two-way speakerphone with adjustable volume control.
• 13-number speed dial memory: 3 one-touch emergency dials (M1, M2, M3) and 10 regular speed dials.
• Last number redial function.
• Flash button for call waiting or transferring calls.
• Hold button with LED indicator.
• Receiver volume control.
• Ringer on/off switch.
• Electronic bell ringer.
• Hearing aid compatible.
• Fully modular two-piece design.

3. Package Awọn akoonu

Jẹrisi pe package rẹ ni awọn nkan wọnyi ninu:

• Coby CT-P730 Telephone Unit (Base and Handset)
• Tẹlifoonu Line Okun

4. Eto

1. So foonu pọ: Plug one end of the coiled handset cord into the handset and the other end into the jack on the left side of the telephone base.
2. Sopọ mọ laini foonu: Plug one end of the telephone line cord into the jack labeled "LINE" on the back of the telephone base. Plug the other end into a standard telephone wall jack.
3. Agbara: This telephone operates without external power. It draws power directly from the telephone line.
4. Ringer Setting: Locate the Ringer ON/OFF switch, usually on the side or back of the unit. Set it to "ON" for the phone to ring.

5. Awọn ilana Iṣiṣẹ

5.1 Ṣiṣe ipe kan

1. Gbe foonu soke tabi tẹ awọn SỌRỌ bọtini.
2. Gbọ ohun orin ipe kan.
3. Dial the desired telephone number using the numeric keypad.
4. Lati mu ipe dopin, rọpo foonu tabi tẹ awọn SỌRỌ bọtini lẹẹkansi.

5.2 Ngba ipe kan

Nigbati foonu ba ndun, gbe foonu soke tabi tẹ awọn SỌRỌ bọtini lati dahun.

5.3 Agbọrọsọ Išė

• Láti mu gbohùngbohùn ṣiṣẹ́ nígbà tí a bá ń pè, tẹ ẹ̀rọ agbọ́hùnsọ̀kan náà SỌRỌ button. You can then place the handset back on the cradle.
• Lati yipada pada si imudani, kan gbe foonu soke.
• To adjust speakerphone volume, use the volume control buttons (if present, or a slider on the side).

5.4 Speed Dialing (M1, M2, M3, and 0-9)

Programming Speed Dial Numbers:

1. Gbe agbekọri naa tabi tẹ SỌRỌ.
2. Tẹ awọn Itaja bọtini.
3. Dial the telephone number you wish to store (up to 16 digits).
4. Tẹ awọn Itaja bọtini lẹẹkansi.
5. Press the desired memory location button (M1, M2, M3 for one-touch, or a numeric key 0-9 for regular speed dial).
6. Rọpo foonu alagbeka tabi tẹ SỌRỌ lati jade kuro ni ipo siseto.

Using Speed Dial Numbers:

1. Gbe agbekọri naa tabi tẹ SỌRỌ.
2. For one-touch speed dial, press the desired memory button (M1, M2, or M3). The number will dial automatically.
3. For regular speed dial, press the AUTO button, then press the desired numeric key (0-9). The number will dial automatically.

5.5 Last Number Redial

Láti tún nọ́mbà tó kẹ́yìn tí a pè:

1. Gbe agbekọri naa tabi tẹ SỌRỌ.
2. Tẹ awọn Titunṣe Bọ́tìnì náà. Nọ́mbà tí a pè kẹ́yìn ni a ó tún padà sí láìfọwọ́sí.

5.6 idaduro Išė

Lati gbe ipe si idaduro:

1. Nigba ipe ti nṣiṣe lọwọ, tẹ DIMU button. The LED indicator next to the HOLD button will illuminate.
2. Lati tun ipe pada, tẹ awọn DIMU button again or lift the handset.

5.7 Flash Button

Awọn FLASH button is used to access network services such as call waiting or call transfer, depending on your telephone service provider. Press FLASH briefly during a call to activate these services.

5.8 Iṣakoso iwọn didun

• Iwọn olugba: Adjust the volume of the handset receiver using the slider or button located on the side of the handset or base unit.
• Speakerphone Volume: Adjust the speakerphone volume using the dedicated volume control (if available) or by pressing the volume buttons during a speakerphone call.

5.9 Ringer On/Off Switch

To silence the telephone ringer, locate the Ringer ON/OFF switch (typically on the side or back of the unit) and slide it to the "OFF" position. Slide it to "ON" to enable the ringer.

6. Itọju

• Ninu: Wipe the telephone with a soft, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Yago fun Olomi: Keep the telephone away from water and other liquids.
• Ibi: Place the telephone on a stable surface, away from direct sunlight, heat sources, and excessive dust.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Coby webojula.

Olupese: Coby