AVF Nexus XL002-A Swivel and Tilt Flat-Panel TV Wall Mount User Manual

1. Ifihan

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Nexus XL002-A Swivel and Tilt Flat-Panel TV Wall Mount. The XL002-A is designed to securely mount flat-panel displays ranging from 12 inches to 23 inches, offering both swivel and tilt functionalities for optimal viewing angles. It is a pivot arm LCD mount with a robust design.

2. Alaye Aabo

Please read all instructions carefully before installation. Incorrect installation can cause product damage, injury, or property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Agbara iwuwo: Do not exceed the maximum weight capacity of 33 pounds (15 kg). This mount is UL-Listed for this capacity.
• Iwọn iboju: This mount is designed for flat-panel displays between 12 inches and 23 inches.
• Odi Iru: Rii daju pe ipele iṣagbesori le ṣe atilẹyin lailewu iwuwo apapọ ti oke ati ifihan.
• Awọn irinṣẹ: Lo awọn irinṣẹ ti o yẹ fun fifi sori ẹrọ. Nigbagbogbo wọ awọn gilaasi aabo.
• Awọn ọmọde: Pa awọn ọmọde kuro lakoko fifi sori ẹrọ.

3. Package Awọn akoonu

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact customer support.

Nọmba 3.1: Iwaju view of the Nexus XL002-A TV Wall Mount in its retail packaging, showing the main bracket and the product's swivel and tilt capabilities.

Nọmba 3.2: Ẹyìn view of the Nexus XL002-A TV Wall Mount packaging, illustrating the wall plate, main bracket, and various installation components and steps.

Awọn akoonu inu apopọ pẹlu:

• TV Wall Mount Bracket (Main Arm Assembly)
• Odi Awo
• Àwọn ohun èlò ìfipamọ́ (àwọn skru, ìdákọ́ró, àwọn ẹ̀rọ ìfọṣọ, àwọn àlàfo)
• Ilana itọnisọna

4. Eto ati fifi sori

Follow these steps carefully to install your TV wall mount. It is recommended to have two people for installation.

1. Ṣetan TV: Attach the TV mount bracket to the back of your flat-panel display using the provided screws. Ensure the screws are tightened securely but do not overtighten. This mount is compatible with VESA mounting centers up to 100mm x 100mm.
2. Pinnu Ibi Igbesoke: Choose a suitable location on your wall. Use a stud finder to locate a wooden stud for secure mounting. If mounting to concrete or brick, use appropriate anchors (not always included).
3. Mark Drill Iho: Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations. Ensure the wall plate is level using a spirit level.
4. Awọn Iho Pilot Lilu: Drill pilot holes at the marked locations. The size of the drill bit will depend on the type of wall and the mounting hardware being used.
5. So Awo Odi: Secure the wall plate to the wall using the provided lag bolts or appropriate fasteners for your wall type. Ensure the wall plate is firmly attached and level.
6. Gbe TV naa soke: Carefully lift the TV with the attached mount bracket and align it with the wall plate. Slide the TV mount bracket onto the wall plate until it is securely seated. The mount positions the TV approximately 4 inches (10.16 cm) from the wall.
7. Ṣe aabo TV naa: Use any provided locking screws or mechanisms to secure the TV to the wall plate, preventing accidental dislodgement.

5. Awọn ilana Iṣiṣẹ

The Nexus XL002-A mount offers flexible viewing options through its swivel and tilt capabilities.

• Iṣẹ Swivel: Gently push or pull the TV to rotate it horizontally to the desired viewing angle. The pivot arm allows for a wide range of left and right movement.
• Iṣe Tilọ: To adjust the vertical viewing angle, gently push the top or bottom of the TV forward or backward. This allows you to reduce glare and achieve a better viewipo ipo.

Always adjust the TV slowly and carefully to avoid sudden movements or damage.

6. Itọju

Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke odi rẹ.

• Ninu: Fi aṣọ rírọrùn, gbígbẹ, nu ibi tí a gbé e sí. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ, nítorí wọ́n lè ba ìparí rẹ̀ jẹ́.
• Awọn ayẹwo igbakọọkan: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
• Gbigbe: If the swivel or tilt mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts, if accessible. Avoid oil-based lubricants.

7. Laasigbotitusita

If you encounter issues with your wall mount, refer to the following common problems and solutions:

• TV kii ṣe ipele: Ensure the wall plate was installed level. If not, remove the TV, adjust the wall plate, and re-mount. Some mounts have fine-tuning adjustments; check your specific model for this feature.
• Oke rilara alaimuṣinṣin: Immediately remove the TV. Check all mounting screws on both the TV and the wall plate. Retighten any loose fasteners. If the wall anchors are failing, consider using stronger anchors or relocating the mount to a more secure wall stud.
• Difficulty swiveling/tilting: Ensure no cables are obstructing the movement. Check for any debris in the moving parts. If the movement is too stiff, refer to the maintenance section for lubrication advice.
• Awọn ẹya ti o padanu: Refer to the package contents list. If parts are missing, contact Nexus customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

Your Nexus XL002-A TV Wall Mount comes with a warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, missing parts, or warranty claims, please contact Nexus customer service.

• Olupese: Nexus / AVF Group Limited
• Webojula: www.avfgroup.com
• Foonu UK: +44 (0) 1952 670000
• Foonu Ọfẹ Toll: 1-800 867 0088