Ọja Pariview
The SOLAS WR007H Shaft Holder/Impeller Tool is a specialized instrument designed to securely hold the driveshaft of Yamaha Personal Watercraft (PWC) during the removal or installation of the impeller. This tool ensures stability and prevents damage to the driveshaft, making impeller maintenance a more efficient and safer process.
Nọmba 1: The SOLAS WR007H Shaft Holder/Impeller Tool. This image displays the hexagonal tool, which is black on one side and silver on the other, with "WR007H" engraved vertically on the silver side. The top opening reveals internal splines designed to grip a shaft.
Ibamu
This tool is specifically designed for Yamaha PWC models equipped with a 20mm driveshaft. Compatible models include:
- GP800R (2001-2005)
- XL800 (2000-2004)
- XLT1200 (1999-2005)
- GP1200R (2000-2002)
- SUV1200 (1999-2003)
- GP1300R (2003-2008)
Always verify your PWC's driveshaft size before use.
Eto ati Igbaradi
Before using the SOLAS WR007H tool, ensure you have the following:
- Appropriate wrenches or sockets for the impeller nut.
- Penetrating oil (optional, for stubborn impellers).
- Safety gloves and eye protection.
- A clean workspace.
Pataki: Disconnect the PWC's battery and ensure the engine is off before beginning any maintenance.
Operating Instructions: Impeller Removal
- Access the Driveshaft: Depending on your PWC model, you may need to remove the pump or other components to gain clear access to the impeller and driveshaft.
- Gbe Irinṣẹ naa: Slide the SOLAS WR007H tool onto the driveshaft. The internal splines of the tool are designed to engage with the splines on the driveshaft, preventing it from rotating.
- Secure the Tool: Ensure the tool is fully seated and gripping the driveshaft firmly. You may need to hold the tool steady with one hand or use a vice if possible, depending on the access.
- Loosen Impeller Nut: With the driveshaft held stationary by the WR007H tool, use the appropriate wrench or socket to loosen the impeller nut. Note that many impeller nuts have reverse (left-hand) threads, meaning you turn clockwise to loosen. Confirm the thread direction for your specific impeller.
- Yọ Impeller kuro: Once the nut is loose, carefully slide the impeller off the driveshaft.
Operating Instructions: Impeller Installation
- Prepare Driveshaft: Ensure the driveshaft splines are clean and free of debris.
- Fi Impeller sori ẹrọ: Slide the new or reconditioned impeller onto the driveshaft, aligning the splines.
- Gbe Irinṣẹ naa: Slide the SOLAS WR007H tool onto the driveshaft, engaging its internal splines with the driveshaft.
- Secure the Tool: Ensure the tool is fully seated and gripping the driveshaft firmly.
- Tighten Impeller Nut: With the driveshaft held stationary by the WR007H tool, thread the impeller nut onto the driveshaft. Remember to turn counter-clockwise for left-hand threads to tighten. Tighten to the manufacturer's specified torque settings.
- Yọ Ohun elo kuro: Once the impeller nut is securely tightened, remove the SOLAS WR007H tool from the driveshaft.
Itoju
To ensure the longevity and proper function of your SOLAS WR007H tool:
- Ninu: After each use, wipe the tool clean of any grease, oil, or debris.
- Ibi ipamọ: Store the tool in a dry environment to prevent rust. A light coat of oil can be applied to the metal surfaces if storing for extended periods in humid conditions.
- Ayewo: Periodically inspect the internal splines for wear or damage. Damaged splines may reduce the tool's effectiveness and could potentially damage the driveshaft.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Tool slips on driveshaft | Incorrect tool size; Driveshaft or tool splines are worn/damaged; Tool not fully seated. | Ensure correct tool for 20mm shaft. Inspect splines on both tool and driveshaft. Ensure tool is fully engaged. |
| Impeller nut won't loosen/tighten | Incorrect thread direction (left-hand vs. right-hand); Nut is seized; Insufficient leverage. | Confirm thread direction (often left-hand for impellers). Apply penetrating oil. Use a longer wrench or breaker bar for more leverage. |
Awọn pato
- Nọmba awoṣe: WR007H
- Nọmba Abala Olupese: WR007H
- Nọmba Apakan OEM: 741968
- Compatible Shaft Size: 20mm (for Yamaha PWC)
- Ìwọ̀n Nkan: 4 iwon
- Awọn iwọn ọja: 2.8 x 3.9 x 1.2 inches
- Brand: SOLAS
Alaye atilẹyin ọja
Specific warranty details for the SOLAS WR007H Shaft Holder/Impeller Tool are not provided in this manual. Please refer to the product packaging or contact SOLAS directly for warranty terms and conditions.
Onibara Support
For further assistance, technical support, or inquiries regarding the SOLAS WR007H tool, please contact the manufacturer or your authorized SOLAS dealer. Contact information can typically be found on the official SOLAS webaaye tabi apoti ọja.
O tun le ṣabẹwo si SOLAS Store on Amazon fun ọja alaye siwaju sii.
